REMOTE SEAL TYPE
PRESSURE TRANSMITTER
FKB...5
DATA SHEET
The FCX -AIII pressure transmitter accurately measures
gauge pressure and transmits a proportional 4 to 20mA signal.
The transmitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor
technology to provide exceptional performance and functionality.
Totally welded construction of the seals assures excellent
reliability in high temperature and highly corrosive process
conditions.
FEATURES
1. High accuracy
0.2% accuracy for all calibrated spans is a standard
feature for all GP models covering 1.3kPa {0.013bar}
range to 50000kPa {500bar} high pressure range. 0.1%
accuracy is available as option. Fuji’s micro-capacitance
silicon sensor assures this accuracy for all elevated or
suppressed calibration ranges without additional adjustment.
2. Minimum environmental influence
The “Advanced Floating Cell” design which protects
the pressure sensor against changes in tempera ture,
and overpressure substantially reduces total measurement error in actual field applications.
3. Fuji/HART® bilingual communications protocol
FCX -AIII series transmitter offers bilingual communications to speak both Fuji proprietary protocol and HART®.
Any HART® compatible devices can communicate with
FCX -AIII.
4. Application flexibility
Various options that render the FCX -AIII suitable for
almost any process applications include:
− Full range of hazardous area approvals
− Built-in RFI filter and lightning arrester
− 5-digit LCD meter with engineering unit
− Stainless steel electronics housing
− Wide selection of materials
− High temperature, high vacuum seals
5. Burnout current flexibility (Under Scale: 3.2 to 4.0mA,
Over Scale: 20.0 to 22.5mA)
Burnout signal level is adjustable using Model FXW
Hand Held Communicator (HHC) to comply with
NAMUR NE43.
6. Dry calibration without reference pressure
Thanks to the best combination of unique construction
of mechanical parts (Sensor unit) and high performance
electronics circuit (Electronics unit), reliability of dry
calibration without reference pressure is at equal level
as wet calibration.
SPECIFICATIONS
Functional specifications
Service:
Liquid, gas, or vapour
Span, range, and overrange limit:
Span limit [kPa]{bar}
Type
F KB
1
FKB
2
FKB
3
FKB
4
FKB
5
Min.
Max.
1.3
{0.013}
5
{0.05}
30
{0.3}
100
{1}
500
{5}
130
{1.3}
500
{5}
3000
{30}
10000
{100}
50000
{500}
Range limit
[kPa]{bar}
−100 to +130
{−1 to +1.3}
−100 to +500
{−1 to +5}
−100 to +3000
{−1 to +30}
−100 to +10000
{−1 to +100}
−100 to +50000
{−1 to +500}
Overrange
limit
[MPa] {bar}
1
{10}
1.5
{15}
9
{90}
15
{150}
75
{750}
Remark: To minimize environmental influence, span should be greater
than 1/40 of the max. span in most applications.
−
Lower range limit (vacuum limit) ;
Silicone fill sensor: See Fig. 1, Fig. 2
Fluorinated fill sensor: Atmospheric pressure
− Conversion factors to different units;
1MPa=103kPa=10bar=10.19716kgf/cm2=145.0377psi
1kPa=10mbar=101.9716mmH2O=4.01463inH2O
Output signal:
4 to 20mA DC with digital signal superimposed on the 4 to 20mA signal.
Power supply:
Transmitter operates on 10.5V to 45V
DC at transmitter terminals.
10.5V to 32V DC for the units with optional arrester.
EDSX5-94h
Date
Aug. 10, 2011
FKB...5
Load limitations: see figure below
[Ω]
Load resistance
2000
1500
1474Ω
R=
E-10.5
(Imax+0.9)x10-3
1000
577Ω
Operating
area
500
24V
250
0
10
16.35
10.5V
Power voltage (DC)
45V
50
E[ V ]
Temperature limit:
Ambient: −40 to +85°C
(−20 to +80°C for LCD indicator)
(−40 to +60°C for arrester option)
(−10 to +60°C for fluorinated oil fill transmitter)
(−10 to +85°C for silicone oil “H”, “S”, “K”) *)
(+20 to +85°C for silicone oil “J”, “T”) *)
*) In case of capillary length is more than 7m, max.
temperature is +55°C.
For explosionproof units (flameproof or intrinsic safety),
ambient temperature must be within the limits specified by each standard.
Process:
required.
Hazardous locations: SEE TABLE2
Zero/span adjustment:
Zero and span are adjustable from the
HHC(1). Zero and span are also adjustable
externally from the adjustment screw.
Damping:
Adjustable from HHC or local adjustment
unit with LCD display.
The time const ant is configurator
between
0.06 to 32 seconds.
Zero elevation/suppression:
Zero can be elevated or suppressed within
the specified range limit of each sensor
model.
Normal/reverse action:
Selectable from HHC(1).
Indication:
Analog indicator or 5-digit LCD meter, as
specified.
Burnout direction:Selectable from HHC(1)
If self-diagnostic detect transmitter failure,
the analog signal will be driven to either
“Output Hold”, “Output Overscale” or
“Output Underscale” modes.
“Output Hold”:
Output signal is hold as the value just
before failure happens.
“Output Overscale”:
Adjustable within the range 20.0mA to
22.5mA from HHC(1)
“Output Underscale”:
Adjustable within the range 3.2mA to
4.0mA from HHC(1)
3.2
4
20
22.5 [mA]
Over scale
Burnout
Normal operating range
Under scale
Probable under range
Burnout
Probable over range
Output Limits comforming the NAMUR NE43 by order.
Loop-check output:
Transmitter can be configured to provide
constant signal 3.2mA through 22.5mA by
HHC(1).
EMC Conformity: EN61326-1: 2006
(Note)
2
(1) HHC: Hand Held Communicator
Fluorinated oil
Code in the
13th digit of
“Code symbols”
W, A and D
−20 to 120°C
Silicone oil
H
−15 to 250°C
Fill fluid
Note: For communication with HHC(1) (Model: FXW), min. of 250 is
Lower limit
of
static press.
Process
temperature
Atmospheric
pressure
20 to 300°C
J
Y and G
−40 to 180°C
S
−15 to 250°C
T
20 to 300°C
K
−15 to 200°C
2.7kPa abs
{20mmHg
abs}
0.13kPa abs
{1mmHg abs}
or more
Storage: −40 to +90°C
Humidity limit:
0 to 100% RH
Communication: With HHC(1) (Model FXW, consult Data
Sheet No. EDS8-47), following items can
be remotely displayed or configured.
Note: HHC’s version must be higher than
7.0 (or FXW
1– 4), for FCX AIII.
Local configurator with LCD display (option):
Local confi gurator with 3 push button
and LCD display can support following
items.
Items
By communication By local configurator
with FXW
(with 3 push button)
Display
Set
Display
Set
Tag No.
v
v
v
v
Model No.
v
v
v
v
—
Serial No. & Software Version
v
—
v
Engineering unit
v
v
v
v
Range limit
v
—
v
—
Measuring range
v
v
v
v
Damping
v
v
v
v
Output mode
v
—
v
—
Burnout direction
v
v
v
v
Calibration
v
v
v
v
Output adjust
—
v
—
v
Data
v
—
v
—
Self diagnoses
v
—
v
—
Printer (In case of FXW with
printer option)
v
—
—
—
External switch lock
v
v
v
v
Transmitter display
v
v
v
v
Linearize
v
v
—
—
Rerange
v
v
v
v
Saturate current
v
v
v
v
Write protect
v
v
v
v
History
– Calibration history
– Ambient temperature history
v
v
v
—
v
v
v
—
Performance specifications
Physical specifications
Reference conditions, silicone oil fill, 316SS isolating diaphragms,
4 to 20mA analog output in linear mode.
Accuracy rating: (including linearity, hysteresis, and repeatability)
(Standard)
For spans greater than 1/10 of URL: ±0.2% of span
For spans below 1/10 of URL:
0.1 URL
± 0.1+0.1
% of span
Span
(
)
(Option) (Code; 21th digit H,K)
Not available for Max span 50000kPa model.
For spans greater than 1/10 of URL: ±0.1% of span
For spans below 1/10 of URL:
0.1 URL
± 0.05+0.05
% of span
Span
(
)
Stability:
±0.2% of upper range limit (URL) for 10
years.
Temperature effect:
Effect per 28°C change between the limits
of - 40°C and +85°C
URL
(Standard)
Zero shift: ± 0.35
%
x
(
)
URL
Total effect: ± (0.5
%
x )
(Option) (Code; 21th digit J,K)
Zero shift:
±0.3% (x 1/4 URL)
0.25 URL
± 0.1 + 0.2
% (x < 1/4 URL)
x
Total effect:
±0.4% (x 1/4 URL)
0.25 URL
± 0.2 + 0.2
% (x < 1/4 URL)
x
(
)
(
)
Overrange effect: Zero shift; 0.2% of URL for any overrange
to maximum limit
Supply voltage effect:
Less than 0.005% of calibrated span per
1V
Update rate:
60 msec
Step response: Time constant: 0.3s (at 23°C)
Dead time: 0.12s
(without electrical damping)
Dielectric strength:
500V AC, 50/60Hz 1 min., between circuit
and earth.
Insulation resistance:
More than 100M/500V DC.
Internal resistance for external field indicator:
12 or less
Electrical connections:
G1/2, 1/2-14 NPT, Pg13.5, or M20 1.5
conduit, as specified.
Process connections:
JIS, ANSI, or DIN raised face flanges or
screw connection JIS/ISO G1 external
thread.
Refer to “Code symbols.”
Process-wetted parts material:
Diaphragm: 316L stainless steel, Hastelloy-C
Monel, Tantalum, Titanium or
Zirconium
Flange face: 316 stainless steel, Hastelloy-C
Monel, Tantalum, Titanium or
Zirconium
Extension: 316 stainless steel, Hastelloy-C
(Refer to “Code symbols”)
Non-wetted parts material:
Electronics housing: Low copper die-cast
aluminum alloy finished with polyester
coating (standard), or 316 stainless
steel (ASTM CF8M), as specified.
Capillary: In case of 11th code “D, E, L, F,
M, N, P”, PE armored stainless steel.
In case of 11th code “Q, R, S, T, V, W,
X”, stainless steel armored stainless
steel.
Mounting flange: 304 stainless steel or
carbon steel, as specified
Fill fluid: Silicone oil (standard) or fluorinated oil
Mounting bracket: 304 stainless steel
Environmental protection:
IEC IP67 and NEMA 6/6P
Mounting:
On 60.5mm (JIS 50A) pipe using mounting bracket, direct wall mounting
Mass {weight}:
Transmitter approximately 8.2 to 11.2kg
without options.
Add; 0.5kg for mounting bracket
4.5kg for stainless steel housing
option
1.5kg per 50mm extension of diaphragm
3
FKB...5
Optional features
ACCESSORIES
Indicator:
A plug-in analog indicator (2.5% accuracy).
An optional 5-digit LCD meter with engineering unit is also available.
Local configurator with LCD display:
An optional 5 digits LCD meter with 3
push buttons can support items as using
communication with FXW.
Arrester:
A built-in arrester protects the electronics
from lightning surges.
Lightning surge immunity:
4kV (1.2 50µs)
Oxygen service: Special cleaning procedures are followed
throughout the process to maintain all
process wetted parts oil-free.
The fill fluid is fluorinated oil.
Chlorine service: Oil-free procedures as above. Includes
fluorinated oil for fill.
Degreasing:
Process-wetted parts are cleaned, but the
fill fluid is standard silicone oil. Not for use
on oxygen or chlorine measurement.
Vacuum and high temperature service:
Special silicone oil and filling procedure
are applied.
See Fig.1 and Fig.2.
Optional tag plate:
An extra stainless steel tag for customer
tag data is wired to the transmitter.
Coating of cell: Cell’s surface is finished with epoxy/polyurethane double coating. Specify if environment is extremely corrosive.
Hand-held communicator:
(Model FXW, refer to Data Sheet No.
EDS8-47)
ORDERING INFOMATION
When ordering this instrument, specify.
1. CODE SYMBOLS
2. Measuring range.
3. Output orientation (burnout direction) when abnormality
is occurred in the transmitter.
Hold / Overscale / Underscale
Unless otherwise specified, output hold function is supplied.
4. Indication method (indicated value and unit) in case of
the actual scale (code D, H, P, S 2,5 on 9th digit).
5. Tag No. (up to 14 alphanumerical characters), if required.
Silicone (Code Y,G)
[kPa abs]
{mbar abs}
[kPa abs]
{mbar abs}
Silicone (Code S)
Silicone (Code T)
Sealing liquid:Silicone (Code K)
101
{1010}
53.3
{533}
Operating pressure
Operating pressure
101
{1010}
Operating area
13.3
{133}
Non-operating
area
0.27
{2.7}
0.13
{1.3}
2.7
{27}
–40 –15
20
60 85
120
180
Process temperature[°C ]
230 250
Fig. 1 Relation between process temperature and
operating pressure
4
Operating area
300
–15
100
Process temperature[°C ]
200
Fig. 2 Relation between process temperature and
operating pressure
CODE SYMBOLS
1 2 3 4 5 6 7 8
Digit
4
5
<Conduit connection>
Case type
Conduit connection
T type
G1/2
1/2-14NPT
T type
T type
Pg13.5
T type
M20×1.5
L type
G1/2
1/2-14NPT
L type
L type
Pg13.5
L type
M20×1.5
<Flanges>
Mounting flange Flange size and rating
7
Ranges
1 2
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
Note1: (*1)
Note2: (*2)
Note3: (*3)
Note4: (*4)
Diaph. extension [mm]
0
50
100
(*3)
150
200
0
Hastelloy-C
316 stainless steel 0
316 stainless steel
Monel
Tantalum
Titanium
Zirconium
0
0
0
0
0
9 10 11 12 13
14 15
21
5
Digit No.
of code
0
1
3
4
6
7
9
M
S
T
A
B
D
E
G
H
K
V
W
X
Y
U
P
Q
Note 2
Note 1
Note 1
<Material/diaphragm extension>
Diaphragm
Flange face
316L stainless
316 stainless
steel
steel
Hastelloy-C
316L stainless
+Au coating
Hastelloy C
Monel
Tantalum
Titanium
Zirconium
F KB
5
6
7
8
S
T
V
W
3
4 5
JIS 10K 80A
JIS 10K 100A
ANSI/JPI 150LB "3"
ANSI/JPI 150LB "4"
DIN PN16/40 DN80
DIN PN16 DN100
JIS 20K 80A
*
JIS 30K 80A
*
ANSI/JPI 300LB 3B
*
ANSI/JPI 600LB 3B
*
Carbon steel
JIS 10K 80A
JIS 10K 100A
ANSI/JPI 150LB "3"
ANSI/JPI 150LB "4"
DIN PN16/40 DN80
DIN PN16 DN100
Screw type, JIS/ISO G1
* *
316 stainless
ANSI/JPI 150LB 3B
* * *
steel
ANSI/JPI 150LB 4B
* * *
ANSI/JPI 300LB 3B
* * *
ANSI/JPI 300LB 4B
* * *
ANSI/JPI 600LB 3B
* * *
None
3 inch wafer
* *
(wafer type)
4 inch wafer
* *
<Span limit (*2) [kPa]{bar}>
1.3…130
{0.013…1.3}
5…500
{0.05…5}
30…3000
{0.3…30}
100…10000 {1…100}
500…50000 {5…500} Available only with material code “V” (*1)
304 stainless
steel
6
Note
Description
(*4)
Note 3
Note 4
1
2
3
4
5
V (*1)
A
B
C
D
H
J
W
M
T
P
R
If range 4 or 5 is selected, specify material “V” in any cases.
100: 1 turn down is possible, but should be used at a span greater than 1/40 of the maximum span for better performance.
Available for 5th digit code “1”,“4”,“7”,“B”,“E”,“H”,“Q”, “W”, “Y”, when 13th digit code “S”, “T”, “K”.
Available for 6th digit code “2”, “3” and 5th digit “0”, “3”, “6”, “9”, “A”, “D”, “G”, “P”, “M”, “S”, “T”, “U”, “V”, “X”.
5
FKB...5
1 2 3 4 5 6 7 8
Digit
9
10
11
12
Description
<Indicator and arrester>
Indicator
Arrester
None
None
Analog, 0 to 100% linear scale
None
Analog, custom scale
None
None
Yes
Analog, 0 to 100% linear scale
Yes
Analog, custom scale
Yes
Digital, 0 to 100% linear scale
None
Digital, custom scale
None
Digital, 0 to 100% linear scale
Yes
Digital, custom scale
Yes
Digital, 0 to 100% linear scale
(Local configurator unit with LCD display)
None
Digital, custom scale
(Local configurator unit with LCD display)
None
Digital, 0 to 100% linear scale
(Local configurator unit with LCD display)
Yes
Digital, custom scale
(Local configurator unit with LCD display)
Yes
<Approvals for hazardous locations>
None (for ordinary locations)
TIIS, Flameproof (Cable gland seal) (*11)
TIIS, Intrinsic safety
FM, Flameproof (or explosionproof) (*14)
FM, Intrinsic safety and nonincentive
FM Combined of flameproof and intrinsic safety (*14)
ATEX Flameproof (*13)
ATEX Intrinsic safety
ATEX Type n
ATEX Combined of flameproof and intrinsic safety (*13)
IECEx Scheme, Flameproof (*13)
IECEx Scheme, Intrinsic safety
CSA, Flameproof (or explosionproof) (*14)
CSA, Intrinsic safety and nonincentive
NEPSI, Flameproof (or exprosionproof)
NEPSI, Intrinsic safety
NEPSI, Combined of flameproof and intrinsic safety
<Capillary and mounting bracket>
Capillary
Mounting bracket
Armor of capillary
1.5 m
304 Stainless steel
PE
(*5)
3
304 Stainless steel
PE
(*5)
5
304 Stainless steel
PE
(*5)
6
304 Stainless steel
PE
(*5)
7
304 Stainless steel
PE
(*5)
8
304 Stainless steel
PE
(*5)
10
304 Stainless steel
PE
(*5)
1.5
304 Stainless steel
Stainless steel
(*6)
3
304 Stainless steel
Stainless steel
(*6)
5
304 Stainless steel
Stainless steel
(*6)
6
304 Stainless steel
Stainless steel
(*6)
7
304 Stainless steel
Stainless steel
(*6)
8
304 Stainless steel
Stainless steel
(*6)
10
304 Stainless steel
Stainless steel
(*6)
<Options>
Extra SS tag plate
Stainless steel elec. housing Coating of cell
None
None
None
Yes
None
None
None (*7)
None
Yes
Yes
None
Yes
None
Yes
Yes
(*8)
Yes
Yes
Yes
Note5: (*5)
Note6: (*6)
Note7: (*7)
Note
F KB
A
B
D
E
F
H
L
P
Q
S
1
2
4
5
Note 11
Note 14
Note 14
Note 13
Note 13
Note 13
Note 14
Note 5
Note 5
Note 5
Note 5
Note 5
Note 5
Note 5
Note 6
Note 6
Note 6
Note 6
Note 6
Note 6
Note 6
Note 7
Note 8
Note 8
Available for 13th digit code “Y, W, G, A, D”. Inquire about in case of 13th other code.
Available for all 13th digit code.
Customer tag number can be engraved on standard stainless steel
name plate. If extra tag plate is required, select “Yes”.
Note8: (*8) Not available for 10th digit code "C".
Note11: (*11) Available for 4th digit code "S".
Note13: (*13) Available for 4th digit code "6", "8", "T", "W".
Note14: (*14) Available for 4th digit code "6", "T".
6
9 10 11 12 13
5
A
C
G
D
H
V
X
K
P
M
R
T
E
J
F
S
U
D
E
L
F
M
N
P
Q
R
S
T
V
W
X
Y
B
M
N
P
Q
14 15
21
Digit No.
of code
1 2 3 4 5 6 7 8
Digit
13
14
15
21
Description
Note
<Special applications and fill fluid>
Treatment
Fill fluid
Standard
Silicone oil
Standard
Fluorinated oil
Degreasing
Silicone oil
Oxygen service
Fluorinated oil (7th digit code "V", "W", "A", "B", "C" and "D")
Chlorine service
Fluorinated oil (7th digit code "H", "T")
High temp. 250°C
Silicone oil Available for 6th digit code "1", "2" or "3",
High temp. 300°C
Silicone oil and available for 7th digit code "V", "W", "A",
"B", "C", "D", "H"
(*15) Note 15
High temp. and vacuum (250°C) Silicone oil Available for 6th digit code "2", "3" only, and
High temp. and vacuum (300°C) Silicone oil available for 7th digit code "V", "W", "A", "B",
High temp. and high vacuum Silicone oil "C" and "D"
<Teflon membrane>
None
Yes (Available for the 5th digit code "0", "3", "6", "9", "M", "S", "T", "A", "D",
"G", "P", "V", "X", "U", and 7th
digit code "V", "W", "J".
Not available for the 13th digit code "H", "J", "S", "T", "K".)
Note 9
<Bolt/nut> (*9)
None
(6th digit code "1", "2", "3")
Cr-Mo alloy hexagon socket head cap screw/carbon steel nut (6th digit code
Cr-Mo alloy hexagon bolt/carbon steel unit
"4", "5")
304 stainless steel/304 stainless steel (6th digit code "4")
630 stainless steel/304 stainless steel (6th digit code "5")
316 stainless steel/316 stainless steel (6th digit code "4")
Note 10
<Other options> (*10)
High accuracy type
Instruction manual attached
Low temperature effect type
Instruction manual attached
H+J
Instruction manual attached
Instruction manual unattached
High accuracy type
Instruction manual unattached
Low temperature effect type
Instruction manual unattached
T+U
Instruction manual unattached
F KB
9 10 11 12 13
14 15
21
5
Digit No.
of code
Y
W
G
A
D
H
J
S
T
K
Y
C
Y
A
B
E
F
U
H
J
K
L
T
U
V
Note9: (*9) In case of tropical use, select stainless bolts and nuts.
Note10: (*10) If other option is not necessary, 21st digit code is blank.
In case of 21st digit code is blank, instruction manual attached.
Note15: (*15) Treatment; Standard
7
FKB...5
OUTLINE DIAGRAM (Unit:mm)
<AMP. case: L type>
< Flange type >
IN CASE OF 4TH DIGIT CODE "S, V, W"
IN CASE OF 4TH DIGIT CODE "T"
φ81
103
φ81
103
8
10
ZERO ADJ. SCREW
MTG. PIPE JIS 50A (2B)
38
U-BOLT M8
57
37
"B" CONDUIT CONN.
172
(21)
(11)
4 HOLES 9 DIA.
N HOLES h DIA
WITH ANALOG IND.
WITH DIGITAL IND.
φ
E
P
φH±1
φF
φG
φE
φD
FLANGE
20
L
162
t
INNER OF GASKET
126
43
41
DETAIL "B"
(CONDUIT CONN.)
198
φ15
EARTH TERMINAL
J
SEE TABLE1
4th digit of the
code symbols
S
T
V
W
7th digit of the
code symbols
V, W J, H, M, T, P, R
A
B
C
D
Conduit conn.
J
K
M
18
2
G 1/2
4
1/2-14NPT 16
Pg13.5
10.5 4.5
M20×1.5
16
4
S(m)
1.5
3
5
6
7
8
10
2-M8X12
S
K
M
11th digit of the
code symbols
D, Q
E, R
L, S
F, T
M, V
N, W
P, X
MASS.
APPROX(kg)
8.2
9.2
10.2
10.7
11.2
L
0
50
100
150
200
H.P.
62
70
120
INNER OF GASKET
TABLE 1
2-M6 SCREW
DEPTH 9
0, A
9
M
1, B
3, D, V
S, X
T, U
4, E, W
Y
6, G
7, H
185
200
210
210
191
210
210
229
254
200
220
CorrosionStandard
resistant
materials
materials
specification specification
Note 1
Note 2
134
150
126
160
126
134
170
126
134
175
151
158
152.5
126
134
168
126
134
168
126
134
190.5
151
158
200
151
158
160
126
134
180
151
158
φE
φG
φH±1
t
P
N-φh
FLANGE
100
100
100
103
100
100
100
103
103
100
103
73
73
73
96
73
73
73
96
96
73
96
38
42
48
38
44
49
52
44
52
44
40
116
116
116
141
116
116
116
141
141
116
141
8-19
8-23
8-23
8-19
4-20
8-23
8-23
8-20
8-23
8-18
8-18
JIS-10K-80A
JIS-20K-80A
JIS-30K-80A
JIS-10K-100A
ANSI 150LB 3B
ANSI 300LB 3B
ANSI 600LB 3B
ANSI 150LB 4B
ANSI 300LB 4B
DIN PN40 DN80
DIN PN16 DN100
Q
φD
φG
5th digit of the
code symbols
φF
φF
20
＜WAFER TYPE＞
Q
80A, 3B
100A, 4B
Note1) In case of the 7th digit of type code is V, A, B, C, D, J or W.
Note2) In case of the 7th digit of type code is H, M, T, P or R.
116
141
OPTION PARTS FOR FLAMEPROOF OF TIIS (JAPAN)
CONNECTION DIAGRAM
<SS TAG PLATE>
10th digit code C (Cable gland type)
NOTE1)
G1/2
DETAIL C
φ13
φ33.5
−/CK− CK+
75
+
106
17
19
20
"C" CONDUIT CONN.
G1/2
CABLE GLAND
NOTE1) IN CASE OF 10TH CODE“C”
, φ11 CABLE IS SUITBLE.
8
<AMP. case: T type>
< Flange type >
IN CASE OF 4TH DIGIT CODE "5, 7, 8"
EARTH TERMINAL
8
10
IN CASE OF 4TH DIGIT CODE "6"
100
(21)
(11)
38
U-BOLT M8
57
φ81
φ81
ZERO ADJ. SCREW
100
MTG. PIPE JIS 50A (2B)
WITH ANALOG IND.
37
"B" CONDUIT CONN.
185
4 HOLES 9 DIA.
WITH DIGITAL IND.
N HOLES h DIA
φ
E
P
φH±1
φF
φG
φE
φD
FLANGE
20
L
t
185
INNER OF GASKET
127
20
226
DETAIL "B"
(CONDUIT CONN.)
K
11th digit of the
code symbols
D, Q
E, R
L, S
F, T
M, V
N, W
P, X
J
SEE TABLE1
5
6
7
8
Conduit conn.
J
K
M
18
2
G 1/2
4
1/2-14NPT 16
Pg13.5
10.5 4.5
4
M20×1.5
16
1.5
3
5
6
7
8
10
2-M8X12
MASS.
APPROX(kg)
8.2
9.2
10.2
10.7
11.2
L
0
50
100
150
200
H.P.
62
70
120
TABLE 1
INNER OF GASKET
φF
0, A
9
M
1, B
3, D, V
S, X
T, U
4, E, W
Y
6, G
7, H
185
200
210
210
191
210
210
229
254
200
220
CorrosionStandard
resistant
materials
materials
specification specification
Note 1
Note 2
150
134
126
134
160
126
170
126
134
175
151
158
134
152.5
126
134
168
126
134
168
126
158
190.5
151
158
200
151
134
160
126
158
180
151
φE
φG
φH±1
t
P
N-φh
FLANGE
100
100
100
103
100
100
100
103
103
100
103
73
73
73
96
73
73
73
96
96
73
96
38
42
48
38
44
49
52
44
52
44
40
116
116
116
141
116
116
116
141
141
116
141
8-19
8-23
8-23
8-19
4-20
8-23
8-23
8-20
8-23
8-18
8-18
JIS-10K-80A
JIS-20K-80A
JIS-30K-80A
JIS-10K-100A
ANSI 150LB 3B
ANSI 300LB 3B
ANSI 600LB 3B
ANSI 150LB 4B
ANSI 300LB 4B
DIN PN40 DN80
DIN PN16 DN100
Note1) In case of the 7th digit of type code is V, A, B, C, D, J or W.
Note2) In case of the 7th digit of type code is H, M, T, P or R.
CONNECTION DIAGRAM
20
＜WAFER TYPE＞
Q
80A, 3B
100A, 4B
116
141
<SS TAG PLATE>
−/CK− CK+
75
+
2-M6 SCREW
DEPTH 9
φF
φD
φG
5th digit of the
code symbols
Q
4th digit of the
code symbols
7th digit of the
code symbols
V, W J, H, M, T, P, R
A
B
C
D
S(m)
S
M
φ15
20
9
FKB...5
<AMP. case: L type>
< Screw type >
IN CASE OF 4TH DIGIT CODE "S, V, W"
ZERO ADJ. SCREW
103
φ81
103
φ81
8
IN CASE OF 4TH DIGIT CODE "T"
10
MTG. PIPE JIS 50A (2B)
38
37
"B" CONDUIT CONN.
172
4 HOLES 9 DIA.
(21)
(11)
20
U-BOLT M8
S
57
WITH ANALOG IND.
100
WITH DIGITAL IND.
14
45
G1
53
2
PACKING
162
126
41
φ23.6
43
φ30
EARTH TERMINAL
K
M
198
DETAIL "B"
(CONDUIT CONN.)
φ15
2-M8X12
J
SEE TABLE1
11th digit of the
code symbols
D, Q
E, R
L, S
F, T
M, V
N, W
P, X
S(m)
62
1.5
3
5
6
7
8
10
70
120
4th digit of the
Conduit conn.
code symbols
J
K
M
S
G 1/2
18
2
T
1/2-14NPT 16
4
V
Pg13.5
10.5 4.5
W
M20×1.5
16
4
TABLE 1
OPTION PARTS FOR FLAMEPROOF OF TIIS (JAPAN)
CONNECTION DIAGRAM
<SS TAG PLATE>
10th digit code C (Cable gland type)
NOTE1)
G1/2
φ13
φ33.5
−/CK− CK+
75
+
DETAIL C
106
17
19
20
"C" CONDUIT CONN.
G1/2
CABLE GLAND
NOTE1) IN CASE OF 10TH CODE“C”
, φ11 CABLE IS SUITBLE.
10
<AMP. case: T type>
< Screw type >
IN CASE OF 4TH DIGIT CODE "6"
8
EARTH TERMINAL
MTG. PIPE JIS 50A (2B)
10
IN CASE OF 4TH DIGIT CODE "5, 7, 8"
(21)
(11)
38
WITH ANALOG IND.
37
S
57
φ81
φ81
100
100
ZERO ADJ. SCREW
4 HOLES 9 DIA.
185
WITH DIGITAL IND.
U-BOLT M8
100
20
"B" CONDUIT CONN.
PACKING
2
53
14
45
G1
185
127
φ23.6
20
φ30
226
DETAIL "B"
(CONDUIT CONN.)
K
M
φ15
2-M8X12
J
SEE TABLE1
11th digit of the
code symbols
D, Q
E, R
L, S
F, T
M, V
N, W
P, X
4th digit of the
code symbols
5
6
7
8
S(m)
62
70
1.5
3
5
6
7
8
10
120
Conduit conn.
J
K
G 1/2
18
1/2-14NPT 16
Pg13.5
10.5
M20×1.5
16
M
2
4
4.5
4
TABLE 1
CONNECTION DIAGRAM
−/CK− CK+
75
+
<SS TAG PLATE>
20
11
FKB...5
TABLE 2
Authorities
ATEX
Intrinsic safety
Authorities
Ex II 1 G
Ex ia IIC T5 Tamb = –40°C to +50°C
Ex ia IIC T4 Tamb = –40°C to +70°C
Entity Parameters:
Ui=28V, Ii=94.3mA, Pi=0.66W,
Ci=26nF (Without Arrester), Li=0.6mH (Without analog indicator),
Ci=36nF (With Arrester), Li=0.7mH (With analog indicator)
Factory
Mutual
13th digit
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
W,A,D
Factory
Mutual
Class I
Div.1 Groups B, C, D
T6 Type 4X
Class II III
Div.1 Groups E, F, G
T6 Type 4X
Tamb max = +60°C
CSA
Class I
Div.1 Groups C, D
Class II
Div.1 Groups E, F, G
Class III
Div.1
Note) “Seal Not Required” enclosure is allowed.
Class I
Div.1 Groups A, B, C, D
Class II
Div.1 Groups E, F, G
Class III
Div.1
Temp Code T5
Tamb max = +50°C
Temp Code T4
Tamb max = +70°C
Entity Parameters:
Vmax=28V, Imax=94.3mA, Ci=25nF (Without Arrester),
Ci=36nF (With Arrester),Li=0.6mH (Without analog meter),
Li=0.7mH (With analog meter)
TIIS
Ex do IIB+H2 T4
Tamb max = +60°C
Maximum process temp. = +120°C
IECEx
Scheme
Ex d IIC T5 IP66/67
Tamb = −40°C to +85°C
Ex d IIC T6 IP66/67
Tamb = −40°C to +65°C
NEPSI
Ex d IIB+H2 T6
Tamb = −40°C to +60°C
Ex ia IIC T4
Tamb max = +60°C
Entity Parameters:
Ui=28V, Ii=94.3mA, Pi=0.66W,
Ci=38.4nF, Li=0.694mH
IECEx
Scheme
Ex ia IIC T4
Tamb = –40°C to +70°C
Ex ia IIC T5
Tamb = –40°C to +50°C
Entity Parameters:
Ui=28V, Ii=94.3mA, Pi=0.66W,
Ci=26nF (Without Arrester), Li=0.6mH (Without analog indicator),
Ci=36nF (With Arrester), Li=0.7mH (With analog indicator)
13th digit
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
A,W,D
Tamb
–40°C to +85°C
–20°C to +80°C
–20°C to +60°C
–40°C to +60°C
–10°C to +60°C
Factory
Mutual
(pending)
Entity Parameters:
Ui=42.4V, Ii=113mA, Pi=1W,
Ci=35.98nF, Li=0.694mH
CSA
Caution on Safety
Ex II 3 GD
EEx nL IIC T5 Tamb = –40°C to +50°C
EEx nL IIC T4 Tamb = –40°C to +70°C
Specific Parameters:
Model without arrester:
Ui=42.4V, Ii=113mA, Pi=1W,
Ci=25.18nF, Li=0.694mH
Model with arrester:
Ui=32V, Ii=113mA, Pi=1W,
Ci=35.98nF, Li=0.694mH
EEx nAL IIC T5 Tamb = –40°C to +50°C
EEx nAL IIC T4 Tamb = –40°C to +70°C
Specific Parameters:
Model without arrester:
Umax=42.4V, Imax=113mA, Pmax=1W
Model with arrester:
Umax=32V, Imax=113mA, Pmax=1W
Ex ia IIC T4
Ex d IIB+H2 T6 / Ex ia IIC T4
Model code
9th digit
A,B,D
L,P,1,2
Q,S,4,5
E,F,H
–
Type n
Nonincendive
Authorities
ATEX
TIIS
NEPSI
Ex II 2 GD
Ex d IIC T6 IP66/67 T85°C
Tamb = −40°C to +65°C
Ex d IIC T5 IP66/67 T100°C
Tamb = −40°C to +85°C
Tamb
–40°C to +85°C
–20°C to +80°C
–20°C to +60°C
–40°C to +60°C
–10°C to +60°C
Entity Parameters:
Vmax=28V, Imax=94.3mA, Pi=0.66W,
Ci=35.98nF, Li=0.694mH
CSA
ATEX
Class I II III
Div.1 Groups A, B, C, D, E, F, G
T4 Entity Type 4X
Model code
9th digit
A,B,D
L,P,1,2
Q,S,4,5
E,F,H
–
Flameproof
Class I II III
Div.2 Groups A, B, C, D, F, G
T4 Entity Type 4X
Model code
9th digit
A,B,D
L,P,1,2
Q,S,4,5
E,F,H
–
13th digit
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
Y,G,H,J,S,T,K
W,A,D
Tamb
–40°C to +85°C
–20°C to +80°C
–20°C to +60°C
–40°C to +60°C
–10°C to +60°C
Class I
Div.2 Groups A, B, C, D
Class II
Div.2 Groups E, F, G
Class III
Div.2
Temp Code T5
Tamb max = +50°C
Temp Code T4
Tamb max = +70°C
Entity Parameters:
Vmax=28V, Ci=25.18nF (Without Arrester),
Ci=35.98nF (With Arrester), Li=0.694mH
*Before using this product, be sure to read its instruction manual in advance.
International Sales Div
Sales Group
Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome,
Shinagawa-ku, Tokyo 141-0032, Japan
http://www.fujielectric.com
Phone: 81-3-5435-7280, 7281 Fax: 81-3-5435-7425
http://www.fjielectric.com/products/instruments/
Information in this catalog is subject to change without notice.
Printed in Japan