FORM AE043 ISS1 ASSEMtech Europe Ltd PRODUCT DATA SHEET 70.0 2.5 5.6 36.0 Drawings not to scale All dimensions in mm SPECIFICATION CONTACT FORM C CONTACT MATERIAL Rhodium SWITCHING CAPACITY Max. W/VA 3 SWITCHING VOLTAGE Max. Vac 30 SWITCHING CURRENT Max. A 0.2 CARRYING CURRENT Max. A 0.5 DIELECTRIC STRENGTH Min. Vdc 200 CONTACT RESISTANCE Max. m Ohm 100 INSULATION RESISTANCE Min. Ohm 109 PULL-IN SENSITIVITY AT 15 - 30 DROP-OUT SENSITIVITY Min. AT 5 SWITCHING TIME Max. ms 1.0 BOUNCE TIME Max. ms 1.5 RELEASE TIME Max. ms 0.05 RESONANCE FREQUENCY Typ. Hz - VIBRATION 35g Hz 2000 SHOCK 11ms G 50 CAPACITANCE Typ. pF 1.5 ˚C -40 +150 OPERATING TEMP. RANGE NOTE: When cutting or bending switch leads it is important that the glass seal is not damaged. The cutting or bending point should be no closer than 3mm to the glass to metal seal and the lead should be supported between the cutting or bending point and the glass to metal seal. PART NUMBER REED SWITCHES Rev. No. B Revision Note 1998 Catalogue Page 34 0551 Günther Date Signature 1-1-98 RG As part of the company policy of continued product improvement, specifications may change without notice. Our sales office will be pleased to help you with the latest information on this product range and details of our full design and manufacturing service. All products are supplied to our standard conditions of sale otherwise agreed in writing. ©1996 Copyright Assemtech Europe Ltd. BS5750/ISO 9000 Reg. No. FM 21080