DIONICS, INC. Phone: (516) 997-7474 Fax: (516) 997-7479 Website: www.dionics-usa.com 65 Rushmore Street Westbury, NY 11590 DIH-126, DIH-127, DIH-136 Power MOSFET N/O SPST Photovoltaic AC-DC Relay Features: Applications: Ø Ø Ø Ø Ø Ø 28V DC Aircraft Power Control & Distribution Ø Motor Control & Power Control Ø Aircraft Flight Control Systems Ø A.T.E. (Automatic Test Equipment) Ø Load Control From Processor I/O Ports Ø High-side DC Power Switching Ø Power Supply Circuits Ø Medical Electronics Low Level Logic Compatibility Thermal Protection With Hysteresis Optical Isolation to 400VDC Low On Resistance, Low Offset Voltage Meet 28V DC System Surge and Spike Requirements of Mil STD-704. Ø Current Limiting Ø Designed To Meet MIL-R-28750 Ø Y-Level MIL Screening Available Description: DIH-126, DIH-127 and DIH-136 are State -of-the-Art AC-DC Photovoltaic (PV) Solid State Relays designed for A.T.E. applications where speed, power, on-resistance and leakage current are critical. These PV relays incorporate an infrared LED input, a PV diode array connected to the gates of 2 pairs of power MOSFETs as output and a unique turn-off circuit. The PV diode array is 2 series-connected groups of photosensitive diodes, which are electrically isolated from, but optically coupled to the input LEDs. When activated, each LED emits infrared light toward the PV diode array, which then responds with a self-generated open circuit voltage, Voc, proportional to the LED input current. This Voc, which is floating and completely isolated from any power supply, is applied to the gates of the power MOSFETs. At the proper value of the input LED current, the generated Voc is sufficient to turn on the MOSFETs and cause the relay to conduct. The MOSFET outputs provide thermal stability, immunity from false turn-on, and low offset voltage. DIH-126, DIH-127 and DIH-136 are specific PV relays that are produced from one basic semi-custom design. Options, such as: current limiting, thermal protection, short circuit protection, status indication, constant current input or ultra fast switching may be incorporated into customized versions of these relays * Equivalent Schematic: * Package Layout: 0.420 6 PV LED Enh. 6 5 4 DIONICS 0.300 5 0.420 1 KOVAR, AU - PLATED DIH-126 2 KOVAR, NI - PLATED XXXX Enh. 4 1 2 GLASS 3 0.175 Pin designation 1 2 3 4 5 6 Pin number Input + Input Case Output Common Output Function Drain + Source - Drain + 0.150 0.020 0.020 0.100 0.018 Typ. 08/2001 v Electrical Characteristics (@ 25 0 C unless otherwise specified): AC-DC Wiring Config. (1) 1 DC Wiring Config. (2) Single MOSFET 1 2 2 1 2 LED LED PV Enh. DC Wiring Config. (3) Parallel MOSFETs LED PV PV Enh . Enh. Rload Enh. Enh. Enh. Rload AC R load VCC v Input Characteristics Turn-On Current Turn-Off Voltage Forward Voltage Drop Reverse Voltage Condition Iload = 100mA Input Current = 10mA Input Current = 25mA Reverse Current = 10µA v Output Characteristics Max. Load Current ( In Free Air and Iin = 50 mA) Load Current (20ms Pulse, 1% Duty Cycle) Load Voltage (Iload = 10µA) On Resistance (Iin = 15mA, Load @5A) VCC Min. Typ. Max Unit − 1.2 − − 10 5 − 2.2 2.6 − 10 − 2.6 3.0 − mA V V V V AC-DC Wiring Config.(1) DC Wiring Config.(2) DC Wiring Config.(3) Unit DIH-126 DIH-127 DIH-136 DIH-126 DIH-127 DIH-136 DIH-126 DIH-127 DIH-136 1.0 0.30 1.25 1.20 0.35 1.65 1.55 0.55 2.10 A 10.0 ±200 1.5 ±400 12.0 ±100 11.0 +200 1.7 +400 13.0 +100 16.0 +200 2.5 +400 18.0 +100 A V 0.80 8.00 0.60 0.40 4.00 0.30 0.20 2.00 0.15 Ù Typical Output Capacitance (Bias Voltage= 50V) Ileakage @180V; 350V; 80V (DIH-126/127/136) 80 25 80 160 50 160 320 100 320 pF 0.20 0.05 0.40 0.20 0.05 0.40 0.40 0.10 0.80 µA Output Offset Voltage (Iin = 15mA) Ton Time @1A; 0.3A; 1.25A (126/127/136) Toff Time @1A; 0.3A; 1.25A (126/127/136) 250 550 70 250 250 70 250 800 70 250 550 70 250 250 70 250 800 70 250 650 70 250 300 70 250 900 70 µV µs µs 5V v Environmental Conditions: Operating Temp. : (Y-Level Mil.) Storage Temp. : (Y-Level Mil.) -20 to 85 0 C (Comm.) -55 to 125 0 C Input 90% 10% T(on) 0V T(off) Td(on) 0 -20 to 85 C (Comm.) -55 to 125 0 C Vop Td(off) 90% 90% Output Shock: (Y-Level Mil.) 50 G, MIL-STD-202 Method 202 Hermeticity: Gross Leak (Comm.) 10-5 atm cc/sec (Y-Level Mil.) Fine Leak 5x10 -8 atm cc/sec Vibration: (Y-Level Mil.) 20G, 10 to 2000 Hz Acceleration: (Y-Level Mil.) 100 G Weight: 1.5 Grams 0V 10% v General Characteristics: Minimum Input/Output Isolation: Minimum Input/Output Resistance: Typical Input/Output capacitance: Typical Thermal Resistance: Min. Transient Protection Capability (dv /dt ): Maximum Power Dissipation @ 25 0 C: 10% 400 VDC 10 8 Ohms 10pF 15mW/ 0 C 100V/ µs 1W 08/2001