ETC LN536GKMG(LNM336KA01)

Numeric Display
3 Digit 14.4mm (.6”) Series
Terminal Connection
28 27 26 25 24 23 22 21 20 19 18 17 16 15
f
e
a
g
b
D1
d
c
dp1
D2
dp2
D3
dp3
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Assignment
37.5
Anode e1
Anode d1
3
Common Anode D1
Common Cathode D1
4
Cathode c1
Anode c1
5
Cathode dp1
Anode dp1
6
Cathode e2
Anode e2
7
Cathode d2
Anode d2
8
Cathode c2
Anode c2
9
Cathode dp2
Anode dp2
10
Cathode e3
Anode e3
11
Cathode d3
Anode d3
12
Cathode g3
Anode g3
13
Cathode c3
Anode c3
14
Cathode dp3
Anode dp3
15
Cathode b3
Anode b3
16
Cathode a3
Anode a3
17
Cathode f3
Anode f3
18
Common Anode D3
Common Cathode D3
19
Common Anode D2
Common Cathode D2
20
Cathode b2
Anode b2
21
Cathode a2
Anode a2
22
Cathode g2
Anode g2
23
Cathode f2
Anode f2
24
Cathode b1
Anode b2
25
Cathode a1
Anode a1
26
Common Anode D1
Common Cathode D1
27
Cathode f1
Anode f1
28
Cathode g1
Anode g1
12.5
*15.24
Cathode d1
0.3
12.5
10°
2
19.0
LN536RAMR ····· LNM236AA01 ····· Amber
LN536RKMR ····· LNM236KA01 ····· Amber
LN536GAMG ···· LNM336AA01 ····· Orange
LN536GKMG ···· LNM336KA01 ····· Orange
Pin
Assignment
No.
1
Cathode e1
3 – φ 1.8
8.0
8.0
Lighting Color
*2.54
0.5
3.5 Min
Global Part No.
14.4
Conventional Part No.
Unit: mm
33.02
Lead wire dimension
■ Absolute Maximum Ratings (Ta = 25°C)
Lighting Color
Red
Green
PD(mW)
50
50
IFP(mA)∗
100
100
IF(mA)
20
20
VR(V)
5
5
Topr(°C)
−25 ∼ +80
−25 ∼ +80
Tstg(°C)
−30 ∼ +85
−30 ∼ +85
Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
■ Electro−Optical Characteristics (Ta = 25°C)
Conventional Lighting
Part No.
Color
LN533RAMR Red
LN533RKMR Red
LN533GAMG Green
LN533GKMG Green
Unit
−
Common
Anode
Cathode
Anode
Cathode
−
IO
IO /d.p
IF
Typ Min Typ
5
600 250 250
5
600 250 250
10
1500 600 500
10
1500 600 500
µcd µcd µcd mA
IO  IF
Typ
2.2
2.2
2.2
2.2
V
λP
Typ
700
700
565
565
nm
VF
Max
2.8
2.8
2.8
2.8
V
∆λ
Typ
100
100
30
30
nm
IF  VF
10000
IF
20
20
20
20
mA
IR
Max
10
10
10
10
µA
VR
5
5
5
5
V
IF  Ta
100
25
50
RAMR
LN5366RKMR
LN53
1000
500
300
100
1
10
5
3
3
5
10
30
Forward Current
318
20
30
Forward Current
3000
Forward Current
L
LN N536
53 GA
6G M
KM G
G
Luminous Intensity
5000
50
100
1
15
10
5
1.6
1.8
2.0
2.2
Forward Voltage
2.4
0
0
20
40
60
80
Ambient Temperature
100
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR