Push-On Tube Fittings 24 Series 4/2.5 - 15/12.5 OD/ID tube l For simple and quick connection of pneumatic circuits l Neat, compact design l Precision machined for complete reliability l Corrosion resistant, nickel plated Technical Data Ordering Information To order, quote appropriate product number from the tables on the following pages. Medium: Compressed air Operating Pressure: Vacuum - 15 bar Dependent upon tube. Operating Temperature: -18°C to +70°C Dependent upon tube. Suitable Tube Sizes 4/2.5mm, 5/3mm, 6/4mm, Polyurethane 8/6mm, 10/8mm, 12/10mm, 15/12.5mm Extraflexible Nylon Tubing Type: Polyurethane, Nylon 11* *Consult our Technical Service for use with any other tubing. Materials Nut & body are nickel plated brass ‘O’ ring to NBR 70 Sealing washers - polyamide 66 02/98 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/AL 9.5.001.01 Push-On Tube Fittings Straight Adaptors and Connectors STRAIGHT MALE ADAPTOR taper BSP STRAIGHT MALE ADAPTOR parallel BSP 24125 Page 9.5.001.03 STRAIGHT MALE ADAPTOR with metric thread 24225 Page 9.5.001.03 24225 Page 9.5.001.03 STRAIGHT FEMALE BSP STRAIGHT ADAPTOR CONNECTOR 24226 BULKHEAD CONNECTOR tube to tube 24029 24020 Page 9.5.001.03 Page 9.5.001.04 SWIVEL ELBOW ADAPTOR ELBOW BANJO ASSEMBLY Page 9.5.001.04 Elbow Connectors and Adaptors ELBOW MALE ADAPTOR taper BSP ELBOW FEMALE BSP ADAPTOR 24145 Page 9.5.001.04 ELBOW CONNECTOR 24246 Page 9.5.001.04 24040 Page 9.5.001.04 24247 Page 9.5.001.04 24A51 Page 9.5.001.08 Tee Connectors and Adaptors TEE MALE BSP ADAPTOR taper - centre leg TEE MALE BSP ADAPTOR taper - off set leg 24165 Page 9.5.001.05 24175 Page 9.5.001.05 TEE CONNECTOR 24060 Page 9.5.001.05 EQUAL CROSS CONNECTOR 24090 TEE BANJO ASSEMBLY 24A71 Page 9.5.001.05 Page 9.5.001.08 BANJO STEM DOUBLE short bolt BANJO STEM TRIPLE short bolt Banjo Bodies and Bolts & Accessories DOUBLE BANJO BODY SINGLE BANJO BODY 24051 BANJO STEM SINGLE short bolt 24071 24A00 24B00 BANJO STEM SINGLE long bolt BANJO STEM DOUBLE long bolt 24A00 24C00 24B00 Page 9.5.001.05 Page 9.5.001.05 Page 9.5.001.06 Page 9.5.001.06 Page 9.5.001.06 Page 9.5.001.06 Page 9.5.001.06 BANJO STEM TRIPLE long bolt BANJO FLOW REGULATOR screwdriver regulation BANJO FLOW REGULATOR regulating out bolt BANJO FLOW REGULATOR bi-directional flow bolt BANJO FLOW REGULATOR regulating in bolt TUBING NUT PLUG 24C00 Page 9.5.001.06 N/AL 9.5.001.02 24K51 Page 9.5.001.07 24K Page 9.5.001.07 24M Page 9.5.001.07 24L Page 9.5.001.07 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 24001 Page 9.5.001.08 24005 Page 9.5.001.08 02/98 Push-On Tube Fittings Method of Assembly 90˚ 2. Place the knurled nut over the tube. Straight Male Adaptor Tube to male taper BSP thread D E B C 3. Push the tube over the barbed end of the fitting up to the tube stop. 24125 Product number 241250418 241250518 241250618 241250628 241250638 241250818 241250828 241250838 241250848 241251018 241251028 241251038 241251048 241251238 241251248 241251548 For use B with tube OD/ID 4/2,5 1⁄ 8 1⁄ 8 5/3 1⁄ 8 6/4 1⁄ 4 6/4 3⁄ 8 6/4 1⁄ 8 8/6 1⁄ 4 8/6 3⁄ 8 8/6 1⁄ 2 8/6 1⁄ 8 10/8 1⁄ 4 10/8 3⁄ 8 10/8 1⁄ 2 10/8 12/10 3⁄ 8 12/10 1⁄ 2 15/12,5 1⁄ 2 4. Screw the knurled nut onto the fitting until finger tight. The hexagon on the nut is to aid release. 24225 Straight Male Adaptor C D E A/F 7,5 7,5 7,5 11,0 11,5 7,5 11,0 11,5 14,0 7,5 11,0 11,5 14,0 11,5 14,0 14,0 23,0 23,0 25,6 29,6 30,0 26,9 30,9 31,4 34,0 29,0 33,0 33,5 36,5 35,0 38,0 40,0 12 12 12 14 17 14 14 17 22 14 14 17 22 17 22 22 Tube to male BSP Parallel thread D C E B 1. Ensure that the end of the tube is cut square and is free from burrs. Product number 242250418 242250518 242250618 242250628 242250638 242250648 242250818 242250828 242250838 242250848 242251018 242251028 242251038 242251048 242251238 242251248 242251548 For use B with tube OD/ID 4/2,5 1⁄ 8 1⁄ 8 5/3 1⁄ 8 6/4 1⁄ 4 6/4 3⁄ 8 6/4 1⁄ 2 6/4 1⁄ 8 8/6 1⁄ 4 8/6 3⁄ 8 8/6 1⁄ 2 8/6 1⁄ 8 10/8 1⁄ 4 10/8 3⁄ 8 10/8 1⁄ 2 10/8 12/10 3⁄ 8 12/10 1⁄ 2 15/12,5 1⁄ 2 C D E A/F 6 6 6 8 9 10 6 8 9 10 6 8 9 10 9 10 10 21,5 24,1 24,1 26,6 27,6 30,0 25,4 27,9 28,9 30,0 27,5 30,0 31,0 32,5 32,5 34,0 36,0 13 13 13 17 19 24 14 17 19 24 14 17 19 24 19 24 24 Supplied complete with sealing washer Straight Female Adaptor 24225 Tube to male metric thread For use with tube OD/ID 242250405 4/2,5 242250505 5/3 242250605 6/4 Product number D C E B M5 M5 M5 C 4 4 4 D E A/F Tube to female BSP parallel thread D E 19,5 8 22,1 8 22,1 8 B Supplied complete with sealing washer B Straight Male Adaptor C 02/98 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 24226 Product number 242260618 242260628 242260638 242260818 242260828 242260838 242260848 242261028 242261038 242261048 For use B with tube OD/ID 1⁄ 8 6/4 1⁄ 4 6/4 3⁄ 8 6/4 1⁄ 8 8/6 1⁄ 4 8/6 3⁄ 8 8/6 1⁄ 2 8/6 1⁄ 4 10/8 3⁄ 8 10/8 1⁄ 2 10/8 C D E A/F 7,5 11,0 11,5 7,5 11,0 11,5 15,0 11,0 11,5 15,0 23,3 27,0 28,0 24,7 28,7 29,2 33,0 30,5 33,3 34,5 14 17 22 14 17 22 24 17 22 24 N/AL 9.5.001.03 Push-On Tube Fittings Straight Connector 24020 24029 Bulkhead Connector Tube to tube Tube to tube Elbow Male Adaptor Tube to male taper BSP thread Product number 241450418 241450518 241450618 241450628 241450638 241450818 241450828 241450838 241450848 241451018 241451028 241451038 241451048 241451238 241451248 241451548 D2 C B 27,5 31,7 32,2 32,2 33,5 34,8 39,0 43,0 47,0 8 10 12 12 12 12 14 17 22 Elbow Connector For use B with tube OD/ID 4/2,5 1⁄ 8 1⁄ 8 5/3 1⁄ 8 6/4 1⁄ 4 6/4 3⁄ 8 6/4 1⁄ 8 8/6 1⁄ 4 8/6 3⁄ 8 8/6 1⁄ 2 8/6 10/8 1⁄ 8 10/8 1⁄ 4 10/8 3⁄ 8 10/8 1⁄ 2 12/10 3⁄ 8 12/10 1⁄ 2 15/12,5 1⁄ 2 Product number D E 24145 D1 E E A/F 240290400 240290500 240290605 240290600 240290806 240290800 240291000 240291200 240291500 C D1 D2 E A/F 7,5 7,5 7,5 11,0 11,5 7,5 11,0 11,5 14,0 7,5 11,0 11,5 14,0 11,5 14,0 14,0 18,5 18,5 18,5 20,6 21,0 19,9 21,9 23,4 23,4 24,0 24,0 25,5 25,5 27,0 27,0 31,5 15,0 15,0 15,0 19,0 20,5 16,5 19,0 21,0 28,0 18,0 22,0 22,0 28,0 22,5 28,0 28,0 8 8 8 8 9 9 9 9 16 11 11 11 16 13 16 16 Tube to parallel female BSP thread D N/AL 9.5.001.04 E A/F E A/F M6x0,5 M7x0,75 M10x1 M10x1 M12x1 M12x1 M14x1 M16x1 M20x1 39,6 39,6 45,5 45,5 47,3 48,4 54,0 57,0 59,0 9 9 14 14 17 17 17 19 24 For use B with tube OD/ID 5/3 1/8 6/4 1/8 6/4 1/4 8/6 1/8 8/6 1/4 10/8 1/4 10/8 3/8 C D1 D2 E A/F 7,5 7,5 11,0 7,5 11,0 11,0 11,5 20,6 20,6 21,2 21,9 23,4 25,5 25,5 18 18 21 19 21 22 25 8 8 9 9 9 11 14 24247 Product number 20,0 20,6 20,6 21,9 21,9 25,5 27,0 33,5 8 8 8 9 9 11 13 16 E 242470618 242470628 242470818 242470828 242471028 F B D D E 240400400 240400500 240400600 240400806 240400800 240401000 240401200 240401500 D Tube to male BSPP C D B B Tube to tube For use with tube OD/ID 4/2,5 5/3 6/4 8/6-6/4 8/6 10/8 12/10 15/12,5 242460518 242460618 242460628 242460818 242460828 242461028 242461038 Swivel Elbow Adaptor 24040 Product number Product number D1 E For use with tube OD/ID 4/2,5 5/3 6/4 x 5/3 6/4 8/6x 6/4 8/6 10/8 12/10 15/12,5 24246 Elbow Female Adaptor C 240200400 240200500 240200605 240200600 240200806 240200800 240201000 240201200 240201500 D B E For use tube with tube OD/ID 4/2,5 5/3 6/4 5/3 6/4 8/6 6/4 8/6 10/8 12/10 15/12,5 D2 Product number D For use A with BSPP tube OD/ID 1⁄ 8 6/4 1⁄ 4 6/4 1⁄ 8 8/6 1⁄ 4 8/6 1⁄ 4 10/8 B C D E F A/F A/F 6 8 6 8 8 20,6 20,6 21,6 23,1 24 20 22 20 23 24 8 8 9 9 11 14 17 14 17 17 Supplied complete with sealing washer A Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 02/98 Push-On Tube Fittings 24165 Product number D1 241650418 241650518 241650618 241650628 241650818 241650828 241651018 241651028 241651038 241651238 241651548 C D2 E B Tee Connector E A/F 7,5 7,5 7,5 11,0 7,5 11,0 7,5 11,0 11,5 11,5 14,0 37,0 37,2 37,2 41,2 39,8 43,8 48,0 48,0 51,0 54,0 63,0 15,0 15,0 15,0 19,0 16,5 20,5 18,0 22,0 22,0 22,5 28,0 8 8 8 9 9 9 11 11 11 13 16 Product number D1 C E 241750518 241750618 241750628 241750818 241750828 241751018 241751028 241751038 241751238 241751548 For use B with tube OD/ID 1⁄ 8 5/3 1⁄ 8 6/4 1⁄ 4 6/4 1⁄ 8 8/6 1⁄ 4 8/6 10/8 1⁄ 8 10/8 1⁄ 4 10/8 3⁄ 8 12/10 3⁄ 8 15/12,5 1⁄ 2 C D1 D2 E A/F 7,5 7,5 11,0 7,5 11,0 7,5 11,0 11,5 11,5 14,0 36,7 36,7 40,2 38,0 41,5 41,5 45,0 45,5 48,5 57,5 20,6 20,6 20,6 21,9 21,9 25,5 25,5 25,5 28,0 32,5 8 8 8 9 9 11 11 11 13 16 24090 Equal Cross Connector D For use with tube OD/ID 4/2,5 5/3 6/4 8/6 - 6/4 8/6 10/8 - 6/4 10/8 - 8/6 10/8 12/10 15/12,5 B D 38,5 41,2 41,2 43,8 43,8 51,0 51,0 51,0 54,0 63,0 E A/F 19,5 20,6 20,6 20,6 21,9 20,6 21,9 25,5 28,0 32,5 8 8 8 9 9 11 11 11 13 16 24051 Product number 240510405 †240510406 240510418 240510505 †240510506 240510518 240510605 †240510606 240510618 240510628 240510638 240510818 240510828 240510838 240510848 240511018 240511028 240511038 240511048 240511238 240511248 240511548 For use Thread with tube OD/ID 4/2,5 M5 4/2,5 M5 4/2,5 1/8 5/3 M5 5/3 M5 5/3 1/8 6/4 M5 6/4 M5 6/4 1/8 6/4 1/4 6/4 3/8 8/6 1/8 8/6 1/4 8/6 3/8 8/6 1/2 10/8 1/8 10/8 1/4 10/8 3/8 10/8 1/2 12/10 3/8 12/10 1/2 15/12,51 1/2 B C Product number D E D 240600400 240600500 240600600 240600806 240600800 240601006 240601008 240601000 240601200 240601500 Single Banjo Body S D2 240900500 240900600 240900800 240901000 240901200 240901500 S D Product number D 5,1 6,1 10,0 5,1 6,1 10,0 5,1 6,1 10,0 13,3 16,6 10,0 13,3 16,6 21,0 10,0 13,3 16,6 21,0 16,6 21,0 21,0 9,0 9,0 14,0 9,0 9,0 14,0 9,0 9,0 14,0 18,0 21,0 14,0 18,0 21,0 26,0 14,0 18,0 21,0 26,0 21,0 26,0 26,0 9,0 9,0 14,5 9,0 9,0 14,5 9,0 9,0 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 16,5 16,5 23,3 16,5 16,5 23,3 16,5 16,5 23,3 25,3 26,8 24,7 27,6 27,7 31,2 27,5 29,5 30,5 34,0 31,5 35,0 36,5 C B For use with tube OD/ID 5/3 6/4 8/6 10/8 12/10 15/12,5 D E A/F 41,6 41,6 44,4 51,0 58,0 64,0 8 8 9 11 13 17 24071 Double Banjo Body S Product number E B D1 Tube to tube B C C 24060 Tube to tube D For use B with tube OD/ID 4/2,5 1⁄ 8 1⁄ 8 5/3 1⁄ 8 6/4 1⁄ 4 6/4 1⁄ 8 8/6 1⁄ 4 8/6 10/8 1⁄ 8 10/8 1⁄ 4 10/8 3⁄ 8 12/10 3⁄ 8 15/12,5 1⁄ 2 24175 Tube to male taper BSP side leg B Tube to male taper BSP centre leg Tee Male Adaptor D2 Tee Male Adaptor 240710405 240710418 240710505 240710518 240710605 240710618 240710628 240710638 240710818 240710828 240710838 240710848 240711018 240711028 240711038 240711048 240711238 240711248 240711548 For use with tube OD/ID 4/2,5 - M5 4/2,5 - 1/8 5/3 - M5 5/3 - 1/8 6/4 - M5 6/4 - 1/8 6/4 -1/4 6/4 - 3/8 8/6 - 1/8 8/6 - 1/4 8/6 - 3/8 8/6 - 1/2 10/8 - 1/8 10/8 - 1/4 10/8 - 3/8 10/8 - 1/2 12/10 - 3/8 12/10 - 1/2 15/12,5 -1/2 B C S D 5,1 10,0 5,1 10,0 5,1 10,0 13,3 16,6 10,0 13,3 16,6 21,0 10,0 13,3 16,6 21,0 16,6 21,0 21,0 9 14 9 14 9 14 18 21 14 18 21 26 14 18 21 26 21 26 26 9,0 14,5 9,0 14,5 9,0 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 33,0 46,6 33,0 46,6 33,0 46,6 50,6 53,6 49,4 55,2 55,4 61,0 53,0 59,0 61,0 68,0 63,0 70,0 73,0 † to be used with bolts marked *alongside. 02/98 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/AL 9.5.001.05 Push-On Tube Fittings Banjo Stem Single 24A00 24B00 Banjo Stem Double Short Short C D E A/F 4 6 8 9 10 4,5 8,5 8,5 8,5 8,5 18,0 27,5 30,0 30,5 31,5 8 14 17 19 24 E Product number A B D E A/F 24B000018 24B000028 24B000038 24B000048 1⁄ 8 6 8 9 10 43,0 46,0 46,5 47,5 14 17 19 24 1⁄ 4 3⁄ 8 1⁄ 2 8,5 B C D 24A000005 M5 24A000018 1⁄ 8 24A000028 1⁄ 4 24A000038 3⁄ 8 24A000048 1⁄ 2 B 16 A D Product number E B A A Banjo Stem Triple 24C00 24A00 Banjo Stem Single Short Long A B D E A/F 24C000018 24C000028 24C000038 24C000048 1⁄ 8 6 8 9 10 59,0 62,0 62,5 63,5 14 17 19 24 1⁄ 4 3⁄ 8 1⁄ 2 E A BSPT B D E A/F 24A00L018 24A00L028 24A00L038 24A00L048 1⁄ 8 6 8 9 10 31,0 33,5 34,5 35,5 14 17 19 24 1⁄ 4 3⁄ 8 1⁄ 2 16 B D 16 Product number 12,5 Product number D E B 8,5 A A Banjo Stem Double 24B00 24C00 Banjo Stem Triple Long Long Product number A 24B00L018 24B00L028 24B00L038 24B00L048 1⁄ 8 1⁄ 4 3⁄ 8 1⁄ 2 B 6 8 9 10 D 56,0 58,5 59,5 60,5 E A/F E 14 17 19 24 Product number A B D E A/F 24C00L018 24C00L028 24C00L038 24C00L048 1⁄ 8 6 8 9 10 81,0 83,5 84,5 85,5 14 17 19 24 1⁄ 4 3⁄ 8 1⁄ 2 B A 12,5 B 25 12,5 D D 25 25 E A N/AL 9.5.001.06 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 02/98 Push-On Tube Fittings Banjo Flow Regulators Operating pressure 0 -10 bar Adjustable Restrictor Valves 1/4 (DN3.5) Supply pressure = 7 bar ∆p = 1 bar Adjustable Restrictor Valves M5 (DN1.5) Supply pressure = 7 bar ∆p = 1 bar Adjustable Restrictor Valves 1/8 (DN2) Adjustable Restrictor Valves 1/4 (DN3.5) Adjustable Restrictor Valves M5 (DN1.5) Supply pressure = 7 bar p = 1 bar Supply pressure = 7 bar p = 1 bar Supply pressure = 7 bar p = 1 bar 440 420 400 380 360 340 320 50 40 30 20 10 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Number of turns of the adjusting needle 300 280 260 240 230 220 210 200 180 160 140 120 Air rate Q at 0°C and 1013 mbar (NI/min) 220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 Air rate Q at 0°C and 1013 mbar (NI/min) Air rate Q at 0°C and 1013 mbar (NI/min) Adjustable Restrictor Valves 1/8 (DN2) Supply pressure = 7 bar ∆p = 1 bar 100 80 60 40 20 44 42 40 38 36 34 32 30 28 26 24 23 22 21 20 18 16 14 12 10 8 6 4 2 1 2 0 1 2 0 3 4 5 6 7 8 9 10 11 12 13 14 15 Number of turns of the adjusting needle 3 4 5 6 7 8 9 10 11 12 13 14 15 Number of turns of the adjusting needle Regulating out D E Product number 24K510405 24K510418 24K510605 24K510618 24K510628 24K510818 24K510828 24K511028 O/D tube 4/2,5 4/2,5 6/4 6/4 6/4 8/6 8/6 10/8 A C D M5 1/8 M5 1/8 1/4 1/8 1/4 1/4 16,5 23,3 16,5 23,3 25,3 24,7 27,6 29,5 24,0 30,5 24,0 30,5 30,5 30,5 35,5 35,5 E A/F 8,0 14,0 8,0 14,0 17,0 14,0 17,0 17,0 Product number *24K000005 24K000018 24K000028 E A B M5 1/8 1/4 4,0 5,5 8,5 C D E A/F 12,5 24,0 8,0 14,5 30,5 14,0 14,5 35,5 17,0 * to be used with bodies marked † alongside D Screwdriver regulation 24K00 C 24K51 B Flow Regulator regulating out A C A Regulating in Product number *24M000005 24M000018 24M000028 E A B M5 4,0 5,5 8,5 1⁄ 8 1⁄ 4 C D E A/F 12,5 24,0 8,0 14,5 30,5 14,0 14,5 35,5 17,0 E Product A number *24L000005 M5 24L000018 1⁄ 8 24L000028 1⁄ 4 B 4,0 5,5 8,5 C D E A/F 12,5 24,0 8,0 14,5 30,5 14,0 14,5 35,5 17,0 * to be used with bodies marked † alongside * to be used with bodies marked † alongside B B D C 24L00 D 24M00 C Bi-directional flow A A 02/98 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/AL 9.5.001.07 Push-On Tube Fittings Elbow Banjo Assembly 24A51 Non regulating bolt A B Non regulating bolt tube A B size thread C D E F A/F 24A510405 4/2,5 M5 9,0 16,5 9,0 18,0 8 24A510505 5/3 M5 9,0 16,5 9,0 18,0 8 24A510605 6/4 M5 9,0 16,5 9,0 18,0 8 24A510418 4/2,5 1⁄ 8 14,0 23,3 14,5 27,5 14 24A510518 5/3 1⁄ 8 14,0 23,3 14,5 27,5 14 24A510618 6/4 1⁄ 8 14,0 23,3 14,5 27,5 14 24A510818 8/6 1⁄ 8 14,0 24,7 14,5 27,5 14 24A510628 6/4 1⁄ 4 18,0 25,3 14,5 30,0 17 24A510828 8/6 1⁄ 4 18,0 27,6 14,5 30,0 17 24A511028 10/8 1⁄ 4 18,0 29,5 14,5 30,0 17 24A510638 6/4 3⁄ 8 21,0 26,8 14,5 30,5 19 24A510838 8/6 3⁄ 8 21,0 27,7 14,5 30,5 19 24A511238 12/10 3⁄ 8 21,0 31,5 14,5 30,5 19 24A511248 12/10 1⁄ 2 26,0 35,0 14,5 31,5 24 C F D Product number E C D E F 24A71 Tee Banjo Assembly A B Supplied complete with sealing washer Product number Tube A B size thr’d 24A710405 24A710505 24A710605 24A710418 24A710518 24A710618 24A710818 24A710628 24A710828 24A710638 24A710838 24A710848 24A711028 24A711238 24A711248 4/2,5 M5 5/3 M5 6/4 M5 4/2,5 1⁄ 8 5/3 1⁄ 8 6/4 1⁄ 8 8/6 1⁄ 8 6/4 1⁄ 4 8/6 1⁄ 4 6/4 3⁄ 8 8/6 3⁄ 8 8/6 1⁄ 2 10/8 1⁄ 4 12/10 3⁄ 8 12/10 1⁄ 2 C D 9,0 33,0 9,0 9,0 33,0 9,0 9,0 33,0 9,0 14,0 46,6 14,5 14,0 46,6 14,5 14,0 46,6 14,5 14,0 49,4 14,5 18,0 50,6 14,5 21,0 53,6 14,5 21,0 53,6 14,5 21,0 55,4 14,5 26,0 61,0 14,5 18,0 59,0 14,5 21,0 63,0 14,5 26,0 70,0 14,5 E F A/F 18,0 18,0 18,0 27,5 27,5 27,5 27,5 30,0 30,5 30,0 30,5 31,5 30,0 30,5 31,5 8 8 8 14 14 14 14 17 19 17 19 24 17 19 24 Supplied complete with sealing washer Tubing Nut Plug 24001 tube size A thread B 240010400 240010500 240010600 240010800 240011000 240011200 240011500 4/2,5 5/3 6/4 8/6 10/8 12/10 15/12,5 M6 x 0,5 M7 x 0,75 M10 x 1,0 M12 x 1,0 M14 x 1,0 M16 x 1,0 M20 x 1,0 10,0 10,0 11,0 11,5 13,5 15,0 16,0 B B A A Product number 24005 C Product number 240050400 240050600 240050800 tube size 4/3 6/4 8/6 A B 10,5 3,5 11,5 4,0 13,5 4,0 C D thread A/F HEX M6 x 0,5 8,0 M10 x 1,0 12,0 M12 x 1,0 14,0 D A/F Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. N/AL 9.5.001.08 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 02/98