Unity Opto Technology Co., Ltd. MVL-721G MVL-721Y MVL-721HR Description Package Dimensions 4.85 (.191) The MVL-721HR series package is 2X5 rectangular led lamps standard color diffused plastic lens. The Hi-EFF red (HR) and yellow LED chips are made with Gallium Arsenide Phosphide on Gallium Phosphide diode. The green LED chip is made with Gallium Phosphide on Gallium Phosphide diode. The red (DR) chip is made with Aluminum Gallium Arsenide on Gallium Arsenide diode. The red (UR) chip is made with Aluminum Gallium Arsenide on Aluminum Gallium Arsenide diode. Unit: mm ( inches ) 6.45 (.254) 0.70 (.028) 2.80±0.20 (.110±.008) 2.00±0.20 (.079±.008) 4.95 (.195) 25.4MIN. (1.000) Applications 0.50 TYP. 1.00 MIN. (.040) l I.C. compatible l Excellent unifformity of light emittance l Most auitable for use like level indicator l Low power consumption 2.54 (.100) A Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Tatings Parameter C Symbol Power Dissipation Peak Forward Current (1/10 Duty Cycle 0.1ms pulse width) Continuous Forward Current Pad Ipf Iaf Derating Linear From 25oC Reverse Voltage Operating Temperature Range Storage Temperature Range VR Topr Tstg Lead Soldering Temperature (1.6mm from body) for 3 seconds at 260oC P1 Maximum Rating GREEN YELLOW 100 120 30 0.4 5 60 80 20 0.25 5 HR DR/UR 100 120 30 0.4 5 o -55 C to + 100oC -55oC to + 100oC 100 120 40 0.5 5 Unit mW A mA/oC mA V Optical -Electrical Characteristics Typ . 3.7 2.1 565 30 140 @TA=25oC Max . Unit . mcd 2.8 V 100 µA nm nm deg Typ . 2.8 2.1 585 35 140 @TA=25oC Max . Unit . mcd 2.8 V 100 µA nm nm deg Typ . 3.8 2.0 640 40 140 @TA=25oC Max . Unit . mcd 2.8 V 100 µA nm nm deg Part No. : MVL-721G Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 1.2 - Part No. : MVL-721Y Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 0.8 - Part No. : MVL-721HR Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 P2 Min . 1.2 - Typical Optical-Electrical Characteristic Curves HR Y 50 Forward Current IF(mA) Relative Luminous Intensity HR G Y 1 0.5 40 30 20 10 0 0 500 550 600 650 700 750 0.8 1.6 2.0 2.4 2.8 5.0 Relative Luminous Intensity 50 Forward Current IF (mA) 1.2 Forward Voltage (V) Fig 2. FORWARD CURRENT VS. FORWARD VOLTAGE Wavelength (nm) Fig 1. RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH 40 G/HR 30 Y 20 10 0 0 20 40 60 80 4.0 3.0 2.0 1.0 0.0 100 0 o Ambient Temperature ( C) Fig 3. FORWARD CURRENT VS. AMBIENT TEMPERATURE 10 20 30 40 50 Forward Current IF (mA) Fig 4. RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 0o Relative Luminous Intensity 10 Relative Luminous Intensity G 1 0.1 10o 20o 30o 40o 50o 1.0 0.9 60o 70o 80o 90o 0.8 0.5 0.3 0.1 0.2 0.4 0.6 -30 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature (oC) Fig 5. RELATIVE LUMINOUS INTENSITY VS. AMBIENT TEMPERATURE Fig 6. RADIATION DIAGRAM P3