D.C. direct drive motors Maximum usable power : from 1 to 3.9 W Sintered bronze bearings lubricated for life ■ Terminal connections 2.8 mm ■ Interference suppression as standard on standard products ■ ■ 1 Types 82 860 0 82 860 0 82 840 0 82 840 0 12 V 24 V 12 V 24 V 82 860 003 82 860 004 rpm W A 5000 1.2 0.1 5000 1.92 0.08 5000 0.96 0.08 5000 1.44 0.06 rpm mN.m W W A °C % 3700 7.7 3 6.2 0.43 50 48 3700 7.7 3 6 0.26 50 50 3700 2.2 0.9 2.16 0.18 50 42 3700 2.2 0.9 2.88 0.11 50 32 B (130 °C) B (130 °C) B (130 °C) B (130 °C) IP40 3.9 30 1.5 8 10 0.0214 1.3 36 8 19 96 3 3000 yes IP40 3.9 30 0.76 32 41.6 0.0448 1.3 36 8 19 95 3 3000 yes IP40 1 8 0.50 24 32 0.019 1.35 46 7 9.5 68 3 3000 yes IP40 1 8 0.3 80 104 0.033 1.3 40 7 9.5 68 3 3000 yes Applications 2 Nominal voltage - Printers - Photocopiers - Diaphragm pumps - Detection systems - Drives for rotary beacons 3 Part numbers ● ● Standard characteristics Speed Absorbed power Absorbed current Characteristics - nominal Speed Torque Output power Absorbed power Absorbed current Gearbox case temperature rise Efficiency General characteristics Made to order products, available on request - other supply voltages - motors with 2 ball bearings - shaft lengths at front and/or rear - connection by radial tags or leads - specific interference suppression - encoder : 5 or 12 pulses per revolution Insulation class (conforming to IEC 85) Degree of protection Maximum usable power Start torque Start current Resistance Resistance : inductive Torque constant Electrical time constant Mechanical time constant Thermal time constant Inertia Weight No of segments Life Sintered bronze bearings W mN.m A Ω mH Nm/A ms ms min g.cm2 g h 4 Options: for standard products non stocked With magnetic encoder 1 pulse/revolution depending on the codes A- Nominal speed and torque curves B- Torque/Current curves A 82 860 0 B 82 860 501 24 V 30 30 82 860 502 A 20 8 3000 5000 0 0 1000 0.4 0.8 1.2 1.6 Dimensions 1,9 3000 L max. 2 tags NFC 20 - 120 series 2.8 x 0.5 12 Type 82 860 0 82 840 0 To order, specify : Standard products 3 Part number Example : D.C. direct drive motor - 82 860 003 ● Standard products, non stocked 1 2 4 Type Voltage Option Example : D.C. direct drive motor with magnetic encoder 1 pulse per revolution : 12 V : 82 860 501 1/9 5000 A 0 0 0.1 0.2 0.3 0.4 0.5 22,5 Ø 32,2 max. 9,5 max. 3 holes at 120° on Ø26 mm : use self tapping screws M2.2 ; screw depth max 6 mm 2 rpm 0 -0,01 0 1000 12V 4 2 A 0 24V Ø 9-0,06 rpm 0 25° Basic principles see page 1/5. Encoder connections see page 1/43. 10 -0,008 10 B 6 12 V 24 V 4 Ø 2-0,014 12V-24V 82 840 0 8 12 V - mN.m 6 20 - mN.m mN.m mN.m Other information 1 L max. (mm) 44.6 34.6