D.C. geared motors Speed range : 1.7 to 344 rpm Gearboxes with torque rating of 5 Nm, solid metal gears ■ Motors : max. usable power 1 to 3.9 W interference suppression on standard products ■ ■ Types Applications 82 867 0 82 867 0 12 V 24 V Nominal voltage - Pumps - Coin receptacles for toll systems - Precision mechanisms - Livestock feeding systems - Etc… Output speeds (rpm) Ratios (i) 344 258 172 103 69 34 17 8.6 1.72 12.5 50/3 25 125/3 62.5 125 250 500 2500 Part numbers 82 867 001 82 867 007 ● ● 82 867 002 82 867 003 82 867 004 82 867 005 82 867 008 82 867 009 82 867 010 82 867 011 ● ● 82 867 006 82 867 012 ● ● Standard gearbox shaft : see dimensions General characteristics Motor Gearbox Maximum permitted torque on gearbox for continuous rating (for 1 million revolutions) Axial load (dynamic) Radial load (dynamic) Maximum usable power Nominal usable power Gearbox case temperature rise Weight 1 82 860 0 81 037 0 82 860 0 81 037 0 N.m 5 5 daN daN W W °C g 2 3 3.9 3 50 465 2 3 3.9 3 50 465 Options : for standard products non stocked Gearbox shaft Ø 8 mm round 79 206 478 Nominal speed and torque curves Made to order products, available on request Motors : - other supply voltages - motors with 2 ball bearings - shaft lengths at front and/or rear - connection by radial tags or leads - specific interference suppression The shaded zone represents the operating range of the geared motor. ● 10000 5000 The horizontal line marks the maximum torque available in continuous duty cycle for a given life. 2000 1000 For higher torque ratings, service life will be reduced. 200 100 ● mN.m 500 50 20 rpm 1 2 Gearbox : - fixing by M3 holes - ball bearing - special shaft - other reduction ratios Other information Basic principles : see page 1/7 Motors 82 840 0 - 82 860 0 : see page 1/9 1/26 5 10 20 50 100 200 500 82 847 0 12 V 24 V Dimensions : 82 867 0 - 82 847 0 2 across flat 1 82 847 0 2 tags NFC20-120 series 2.8 x 0.5 mm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 82 840 0 81 037 0 82 840 0 81 037 0 5 5 2 3 1 0.8 50 465 2 3 1 0.8 50 465 22.5 ● Ø 32.2 max. 3 ● 4 fixing holes Ø M4 x 12 Type 82 867 0 82 847 0 (shaft pushed-in ←) L max. (mm) 79.8 69.8 Non stocked product : gearbox output shaft Shaft 79 206 478 1 Ø8 4 ● ● Ø 14 19,7 max. mN.m 10000 (shaft pushed-in ←) 5000 2000 1000 500 200 100 50 20 rpm 1 2 5 10 20 50 100 200 500 To order, specify : Standard products 3 Part number Example : D.C. geared motor - 82 867 001 ● Standard products, non stocked 1 2 3 ● 4 Type Nominal voltage Output speeds Option : D.C. geared motor 82 867 0 - 12 V - 258 rpm - output shaft 79 206 478 Example Made to order products, available on request 1/27