ETC LMV324SIDR

LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
D
D
D
D
D
D
2.7-V and 5-V Performance
Low-Power Shutdown Mode (LMV324S)
No Crossover Distortion
Low Supply Current:
LMV321 . . . 130 µA Typ
LMV358 . . . 210 µA Typ
LMV324 . . . 410 µA Typ
LMV324S . . . 410 µA Typ
Rail-to-Rail Output Swing
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 1000-V Charged-Device Model (C101)
description/ordering information
The LMV321, LMV358, and LMV324/LMV324S
are single, dual, and quad low-voltage (2.7 V to
5.5 V), operational amplifiers with rail-to-rail
output swing. The LMV324S is a variation of the
standard LMV324 that includes a power-saving
shutdown feature that reduces supply current to a
maximum of 5 µA per channel when the amplifiers
are not needed.
The LMV321, LMV358, LMV324, and LMV324S
are the most cost-effective solutions for
applications where low-voltage operation, space
saving, and low price are needed. These
amplifiers were specifically designed for
low-voltage (2.7 V to 5 V) operation, with
performance specifications meeting or exceeding
the venerable LM358 and LM324 devices that
operate from 5 V to 30 V. Additional features of the
LMV3xx devices are a common-mode input
voltage range that includes ground,1-MHz
unity-gain bandwidth, and 1-V/µs slew rate.
LMV324 . . . D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN–
1IN+
VCC+
2IN+
2IN–
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
LMV324S . . . D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN–
1IN+
VCC
2IN+
2IN–
2OUT
1/2 SHDN
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
3/4 SHDN
LMV358 . . . D, DGK, OR PW PACKAGE
(TOP VIEW)
1OUT
1IN–
1IN+
GND
1
8
2
7
3
6
4
5
VCC+
2OUT
2IN–
2IN+
LMV321 . . . DBV OR DCK PACKAGE
(TOP VIEW)
The LMV321 is available in the ultra-small DCK
(SC-70) package, which is approximately
one-half the size of the DBV (SOT-23) package.
This package saves space on printed circuit
boards and enables the design of small portable
electronic devices. It also allows the designer to
place the device closer to the signal source to
reduce noise pickup and increase signal integrity.
1IN+
1
GND
2
IN–
3
5
VCC+
4
OUT
Copyright  2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
ORDERING INFORMATION
TOP-SIDE
MARKING‡
Tube of 50
LMV324ID
Reel of 2500
LMV324IDR
Tube of 40
LMV324SID
Reel of 2500
LMV324SIDR
Tube of 75
LMV358ID
Reel of 2500
LMV358IDR
SC-70 (DCK)
Reel of 3000
LMV321IDCKR
R3_
SOT-23 (DBV)
Reel of 3000
LMV321IDBVR
RC1_
LMV324IPWR
MV324I
LMV324SIPWR
MV324SI
LMV358IPWR
MV358I
SOIC (D)
– 40°C to 85°C
ORDERABLE
PART NUMBER
PACKAGE†
TA
TSSOP (PW)
Reel of 2000
VSSOP (DGK)
Reel of 2500
LMV358IDGKR
LMV324I
LMV324SI
MV358I
R5S
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
‡ DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
symbol (each amplifier)
–
IN –
OUT
2
+
IN +
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5.5 V
Input voltage, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5.5 V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,
VCC ≤ 5.5 V (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Package thermal impedance, θJA (see Notes 4 and 5): D (8-pin) package . . . . . . . . . . . . . . . . . . . . . . 97°C/W
D (14-pin) package . . . . . . . . . . . . . . . . . . . . 86°C/W
D (16-pin) package . . . . . . . . . . . . . . . . . . . . 73°C/W
DBV package . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W
DCK package . . . . . . . . . . . . . . . . . . . . . . . . 252°C/W
DGK package . . . . . . . . . . . . . . . . . . . . . . . . 172°C/W
PW (8-pin) package . . . . . . . . . . . . . . . . . . . 149°C/W
PW (14-pin) package . . . . . . . . . . . . . . . . . . 113°C/W
PW (16-pin) package . . . . . . . . . . . . . . . . . . 108°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65 to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+ with respect to IN–.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 6)
VCC
Supply voltage (single-supply operation)
VIH
A lifi tturn-on voltage
Amplifier
lt
llevell (LMV324S)‡
VCC = 2.7 V
VCC = 5 V
VIL
turn off voltage level (LMV324S)
Amplifier turn-off
VCC = 2.7 V
VCC = 5 V
MIN
MAX
2.7
5.5
UNIT
V
1.7
V
3.5
0.7
1.5
V
TA
Operating free-air temperature
–40
85
°C
‡ VIH should not be allowed to exceed VCC.
NOTE 6: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
electrical characteristics at TA = 25°C and VCC+ = 2.7 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
aV
Average temperature coefficient
of input offset voltage
IO
TEST CONDITIONS
MIN
TYP
MAX
1.7
7
UNIT
mV
mV/°C
5
IIB
IIO
Input bias current
11
250
nA
Input offset current
5
50
nA
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio
VCM = 0 to 1.7 V
VCC = 2.7 V to 5 V,
VICR
Common-mode input voltage range
CMRR w 50 dB
Output swing
RL = 10 kΩ to 1.35
1 35 V
ICC
Supply
y current
LMV358I (both amplifiers)
LMV324I/LMV324SI (all four amplifiers)
260
680
B1
Fm
Unity-gain bandwidth
Gm
Gain margin
10
dB
Vn
In
Equivalent input noise voltage
f = 1 kHz
46
nV/√Hz
Equivalent input noise current
f = 1 kHz
0.17
pA/√Hz
50
63
dB
50
60
dB
0 to 1.7
–0.2 to 1.9
V
VCC–100
VCC–10
60
180
80
170
140
340
VO = 1 V
High level
Low level
LMV321I
CL = 200 pF
Phase margin
mV
mA
m
1
MHz
60
deg
shutdown characteristics (LMV324S) at TA = 25°C and VCC+ = 2.7 V (unless otherwise noted)
PARAMETER
ICC(SHDN)
t(on)
t(off)
4
TEST CONDITIONS
Supply current in shutdown mode
(per channel)
SHDN ≤ 0.6 V
Amplifier turn-on time
AV = 1, RL = Open (measured at 50% point)
AV = 1, RL = Open (measured at 50% point)
Amplifier turn-off time
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MIN
TYP
MAX
5
UNIT
mA
2
ms
40
ns
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
electrical characteristics at specified free-air temperature range, VCC+ = 5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
aV
Average temperature coefficient
of input offset voltage
IO
IIB
Input bias current
IIO
Input offset current
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio
VICR
Common mode
Common-mode
input voltage range
TEST CONDITIONS
TA
25°C
MIN
7
UNIT
mV
9
25°C
5
25°C
15
–40°C to 85°C
mV/°C
250
nA
500
5
–40°C to 85°C
50
nA
150
VCM = 0 to 4 V
VCC= 2.7 V to 5 V, VO = 1 V,
VCM = 1 V
25°C
50
65
dB
25°C
50
60
dB
CMMR w 50 dB
25°C
0 to 4
–0.2
0 2 to 4
4.2
2
V
25°C
VCC–300
VCC–400
VCC–40
High level
–40°C to 85°C
RL = 2 kΩ to 2
2.5
5V
25°C
Low level
25°C
High level
–40°C to 85°C
RL = 10 kΩ to 2
2.5
5V
AVD
RL = 2 kΩ
IOS
Output short-circuit
short circuit current
Sourcing, VO = 0 V
Sinking, VO = 5 V
65
–40°C to 85°C
15
–40°C to 85°C
10
25°C
100
V/mV
5
60
10
160
130
210
–40°C to 85°C
250
440
A
mA
615
25°C
410
–40°C to 85°C
CL = 200 pF
mA
350
25°C
LMV324I/LMV324SI
(all four amplifiers)
180
280
25°C
–40°C to 85°C
LMV358I (both amplifiers)
mV
VCC–10
25°C
LMV321I
300
400
VCC–100
VCC–200
25°C
Low level
Large signal differential
Large-signal
voltage gain
120
–40°C to 85°C
Output swing
Supply current
MAX
1.7
–40°C to 85°C
25°C
ICC
TYP
830
1160
B1
fm
Unity-gain bandwidth
25°C
1
MHz
Phase margin
25°C
60
deg
Gm
Gain margin
25°C
10
dB
Vn
In
Equivalent input noise voltage
f = 1 kHz
25°C
39
nV/√Hz
Equivalent input noise current
f = 1 kHz
25°C
0.21
pA/√Hz
SR
Slew rate
25°C
1
V/ms
shutdown characteristics (LMV324S) at TA = 25°C and VCC+ = 5 V (unless otherwise noted)
PARAMETER
ICC(SHDN)
t(on)
t(off)
TEST CONDITIONS
TA
Supply current in shutdown mode
(per channel)
SHDN ≤ 0.6 V
Amplifier turn-on time
AV = 1, RL = Open (measured at 50% point)
AV = 1, RL = Open (measured at 50% point)
Amplifier turn-off time
POST OFFICE BOX 655303
MIN
TYP
–40°C to 85°C
• DALLAS, TEXAS 75265
MAX
5
UNIT
mA
2
ms
40
ns
5
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
GAIN AND PHASE MARGIN
vs
FREQUENCY
GAIN AND PHASE MARGIN
vs
FREQUENCY
40
VCC = 2.7 V
RL = 100 kΩ, 2 kΩ, 600 Ω
30
100
Phase
10
50
0
600 Ω
10
50
0
–10
1
10
100
–50
10000
1000
1
10
100
1000
Frequency – kHz
Frequency – kHz
Figure 2
Figure 1
GAIN AND PHASE MARGIN
vs
FREQUENCY
GAIN AND PHASE MARGIN
vs
FREQUENCY
100
70
100
60
80
60
80
60
50
40
40
16 pF
30
20
100 pF
0
20
Gain
10
0
–10
–20
10
–20
500 pF
1000 pF
VCC = 5 V
RL = 600 W
CL = 16 pF, 100 pF,
500 pF, 1000 pF
100
16 pF
100 pF
500 pF
1000 pF
1000
20
40
20
16 pF
500 pF
Gain
0
100 pF
10
0
–60
–10
–20
–20
16 pF
100 pF
VCC = 5 V
RL = 100 kΩ
CL = 16 pF, 100 pF,
500 pF, 1000 pF
10
Frequency – kHz
100
1000 pF
1000
Frequency – kHz
Figure 4
Figure 3
POST OFFICE BOX 655303
60
1000 pF
30
–40
–80
10000
Phase
40
Gain – dB
Phase
Phase Margin – Deg
70
50
Gain – dB
–50
10000
–20
–20
6
100
Phase
0
0
–10
2 kΩ
20
Gain – dB
600 Ω
150
Gain
100 kΩ
Phase Margin – Deg
Gain – dB
Gain
2 kΩ
20
30
150
100 kΩ
200
VCC = 5.0 V
RL = 100 kΩ, 2 kΩ, 600 Ω
200
• DALLAS, TEXAS 75265
500 pF
–40
–60
–80
10000
Phase Margin – Deg
40
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
STABILITY
vs
CAPACITIVE LOAD
GAIN AND PHASE MARGIN
vs
FREQUENCY
10000
50
160
85°C
25°C
–40°C
100
Phase
20
70
Gain
40
10
VCC = 5 V
RL = 2 kΩ
TA = 85°C, 25°C, –40°C
10
100
1000
CL
LMV3xx
(25% Overshoot)
100
VCC = ±2.5 V
AV = +1
RL = 2 kΩ
VO = 100 mVPP
10
–2
–20
10000
RL
–2.5 V
1000
10
–10
VO
+
VI
Capacitive Load – pF
Gain – dB
30
0
_
130
Phase Margin – Deg
40
2.5 V
LMV324S
(25% Overshoot)
–1.5
–1
–0.5
0
0.5
1
1.5
Output Voltage – V
Frequency – kHz
Figure 5
Figure 6
STABILITY
vs
CAPACITIVE LOAD
STABILITY
vs
CAPACITIVE LOAD
10000
10000
2.5 V
VI
1000
VO
+
RL
2.5 V
CL
Capacitive Load – nF
Capacitive Load – pF
_
LMV324S
(25% Overshoot)
100
VCC = ±2.5 V
AV = +1
RL = 1 MΩ
VO = 100 mVPP
LMV3xx
(25% Overshoot)
10
–2.0
–1.5
–1
–0.5
0
0.5
1
VCC = ±2.5 V
RL = 2 kΩ
AV = 10
VO = 100 mVPP
LMV324S
(25% Overshoot)
1000
LMV3xx
(25% Overshoot)
100
134 kΩ
1.21 MΩ
+2.5 V
_
VI
1.5
Output Voltage – V
+
RL
VO
CL
–0.5
0
–2.5 V
10
–2.0
–1.5
–1
0.5
1
1.5
Output Voltage – V
Figure 8
Figure 7
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
SLEW RATE
vs
SUPPLY VOLTAGE
STABILITY
vs
CAPACITIVE LOAD
1.500
10000
1.400
LMV3xx
(25% Overshoot)
1000
LMV324S
(25% Overshoot)
134 kΩ
100
1.21 MΩ
_
+
Gain
1.200
NSLEW
1.100
LMV3xx
1.000
PSLEW
0.900
0.800
+2.5 V
VI
RL = 100 kΩ
1.300
Slew Rate – V/µs
Capacitive Load – nF
VCC = ±2.5 V
RL = 1 MΩ
AV = 10
VO = 100 mVPP
VO
CL
RL
NSLEW
0.700
LMV324S
0.600
PSLEW
–2.5 V
10
–2.0
0.500
2.5
–1.5
–1
–0.5
0
0.5
1
3.0
3.5
5.0
Figure 10
Figure 9
INPUT CURRENT
vs
TEMPERATURE
SUPPLY CURRENT
vs
SUPPLY VOLTAGE – QUAD AMPLIFIER
–10
700
VCC = 5 V
VI = VCC/2
LMV3xx
–20
LMV324S
TA = 85°C
500
Input Current – nA
Supply Current – µA
4.5
V CC – Supply Voltage – V
Output Voltage – V
600
4.0
1.5
TA = 25°C
400
300
TA = –40°C
200
–30
LMV3xx
–40
–50
LMV324S
100
–60
–40 –30 –20 –10 0 10 20 30 40 50 60 70 80
0
0
1
2
3
4
5
6
TA – °C
VCC – Supply Voltage – V
Figure 12
Figure 11
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
SOURCE CURRENT
vs
OUTPUT VOLTAGE
SOURCE CURRENT
vs
OUTPUT VOLTAGE
100
100
VCC = 5 V
VCC = 2.7 V
10
Sourcing Current – mA
Sourcing Current – mA
10
LMV3xx
1
LMV324S
0.1
LMV3xx
1
LMV324S
0.1
0.01
0.01
0.001
0.001
0.001
0.001
0.01
0.1
1
Output Voltage Referenced to VCC+ – V
0.01
10
Figure 14
SINKING CURRENT
vs
OUTPUT VOLTAGE
100
SINKING CURRENT
vs
OUTPUT VOLTAGE
100
VCC = 2.7 V
VCC = 5 V
10
10
LMV324S
Sinking Current – mA
Sinking Current – mA
1
Output Voltage Referenced to VCC+ – V
Figure 13
1
LMV3xx
0.1
0.01
0.001
0.001
0.1
10
LMV324S
1
0.1
LMV324
0.01
0.01
0.1
1
10
Output Voltage Referenced to GND – V
0.001
0.001
0.01
0.1
1
10
Output Voltage Referenced to GND – V
Figure 16
Figure 15
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT CURRENT
vs
TEMPERATURE
SHORT-CIRCUIT CURRENT
vs
TEMPERATURE
120
300
LMV324S
VCC = 5 V
270
Sinking Current – mA
LMV324S
VCC = 5 V
210
LMV3xx
VCC = 5 V
180
150
120
LMV3xx
VCC = 2.7 V
90
60
LMV324S
VCC = 2.7 V
Sourcing Current – mA
100
240
80
LMV3xx
VCC = 5 V
60
LMV3xx
VCC = 2.7 V
40
LMV324S
VCC = 2.7 V
20
30
0
–40 –30 –20 –10 0
0
–40 –30 –20–10 0
10 20 30 40 50 60 70 80 90
10 20 30 40 50 60 70 80 90
TA – °C
TA – °C
Figure 17
Figure 18
+kSVR
vs
FREQUENCY
–kSVR
vs
FREQUENCY
90
80
LMV324S
VCC = –5 V
RL = 10 kΩ
70
60
VCC = 5 V
RL = 10 kΩ
70
LMV3xx
60
50
+k SVR – dB
–k SVR – dB
LMV324S
80
40
30
LMV3xx
50
40
30
20
20
10
0
100
10
1,000
10,000
100,000
1,000,000
0
100
10,000
100,000
Frequency – Hz
Frequency – Hz
Figure 20
Figure 19
10
1,000
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1,000,000
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
–kSVR
vs
FREQUENCY
+kSVR
vs
FREQUENCY
80
80
VCC = –2.7 V
RL = 10 kΩ
LMV324S
70
LMV324S
70
60
60
LMV3xx
50
+k SVR – dB
–k SVR – dB
LMV3xx
40
30
50
40
30
20
20
10
10
0
100
1,000
10,000
100,000
0
100
1,000,000
1,000
Frequency – Hz
10,000
100,000
Figure 22
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
OUTPUT VOLTAGE
vs
FREQUENCY
70
6
RL = 10 kΩ
RL = 10 kΩ
THD > 5%
AV = 3
60
5
Peak Output Voltage – V OPP
LMV3xx
LMV324S
Negative Swing
50
1,000,000
Frequency – Hz
Figure 21
Output Voltage Swing vs Supply Voltage – mV
VCC = 2.7 V
RL = 10 kΩ
40
30
20
Positive Swing
10
LMV324S
VCC = 5 V
4
LMV3xx
VCC = 5 V
3
LMV324S
VCC = 2.7 V
2
LMV3xx
VCC = 2.7 V
1
0
2.5
3.0
3.5
4.0
4.5
5.0
0
1
VCC – Supply Voltage – V
10
100
1000
10000
Frequency – kHz
Figure 23
Figure 24
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
OPEN-LOOP OUTPUT IMPEDANCE
vs
FREQUENCY
CROSSTALK REJECTION
vs
FREQUENCY
110
LMV3xx
VCC = 5 V
Impedance – Ω
90
80
70
LMV324S
VCC = 2.7 V
60
50
LMV324S
VCC = 5 V
40
VCC = 5 V
RL = 5 kΩ
AV = 1
VO = 3 VPP
140
Crosstalk Rejection – dB
100
150
LMV3xx
VCC = 2.7 V
130
120
110
100
30
20
1
1000
2000
3000
4000
90
100
Frequency - kHz
Figure 25
12
1,000
10,000
Frequency – Hz
Figure 26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100,000
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
LMV3xx
LMV3xx
1 V/Div
1 V/Div
Input
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
T = 25°C
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
1 µs/Div
1 µs/Div
Figure 28
Figure 27
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
1 V/Div
LMV3xx
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = –40°C
1 µs/Div
Figure 29
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
NONINVERTING SMALL-SIGNAL
PULSE RESPONSE
NONINVERTING SMALL-SIGNAL
PULSE RESPONSE
Input
Input
LMV3xx
50 mV/Div
50 mV/Div
LMV3xx
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = 25°C
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
1 µs/Div
1 µs/Div
Figure 31
Figure 30
NONINVERTING SMALL-SIGNAL
PULSE RESPONSE
50 mV/Div
Input
LMV3xx
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = –40°C
1 µs/Div
Figure 32
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
INVERTING LARGE-SIGNAL
PULSE RESPONSE
INVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
Input
LMV3xx
1 V/Div
1 V/Div
LMV3xx
LMV324S
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
VCC = ±2.5 V
RL = 2 kΩ
TA = 25°C
1 µs/Div
1 µs/Div
Figure 33
Figure 34
INVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
1 V/Div
LMV3xx
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = –40°C
1 µs/Div
Figure 35
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
INVERTING SMALL-SIGNAL
PULSE RESPONSE
INVERTING SMALL-SIGNAL
PULSE RESPONSE
Input
Input
LMV3xx
50 mV/Div
50 mV/Div
LMV3xx
LMV324S
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
VCC = ±2.5 V
RL = 2 kΩ
TA = 25°C
1 µs/Div
1 µs/Div
Figure 36
Figure 37
INVERTING SMALL-SIGNAL
PULSE RESPONSE
50 mV/Div
Input
LMV3xx
LMV324S
VCC = ±2.5 V
RL = 2 kΩ
TA = –40°C
1 µs/Div
Figure 38
16
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
INPUT CURRENT NOISE
vs
FREQUENCY
INPUT CURRENT NOISE
vs
FREQUENCY
0.80
0.50
0.60
0.40
0.20
VCC = 5 V
0.45
Input Current Noise – pA/ Hz
Input Current Noise – pA/ Hz
VCC = 2.7 V
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
10 Hz
100 Hz
1 KHz
10 KHz
0.00
10 Hz
Frequency
100 Hz
1 kHz
10 kHz
Frequency
Figure 39
Figure 40
INPUT VOLTAGE NOISE
vs
FREQUENCY
200
Input Voltage Noise – nV/ Hz
180
160
140
120
100
80
VCC = 2.7 V
60
40
VCC = 5 V
20
10 Hz
100 Hz
1 kHz
10 kHz
Frequency
Figure 41
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD, LMV324S QUAD WITH SHUTDOWN
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263G – AUGUST 1999 – REVISED NOVEMBER 2002
TYPICAL CHARACTERISTICS
THD + N
vs
FREQUENCY
10.000
1.000
THD + N
vs
FREQUENCY
10.000
VCC = 2.7 V
RL = 10 kΩ
AV = 1
VO = 1 VPP
VCC = 2.7 V
RL = 10 kΩ
AV = 10
VO = 1 VPP
1.000
THD – %
THD – %
LMV324S
LMV3xx
0.100
0.100
LMV3xx
0.010
0.010
LMV324S
0.001
10
100
1000
10000
0.001
100000
10
1000
100
Frequency – Hz
Figure 42
1.000
100000
Figure 43
THD + N
vs
FREQUENCY
10.000
10000
Frequency – Hz
THD + N
vs
FREQUENCY
10.000
VCC = 5 V
RL = 10 kΩ
AV = 1
VO = 1 VPP
VCC = 5 V
RL = 10 kΩ
AV = 10
VO = 2.5 VPP
1.000
0.100
THD – %
LMV324S
LMV324S
0.010
0.100
0.010
LMV3xx
LMV3xx
0.001
0.001
10
100
1000
10000
100000
10
Frequency – Hz
1000
Frequency – Hz
Figure 44
18
100
Figure 45
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10000
100000
MECHANICAL DATA
MSOI002B – JANUARY 1995 – REVISED SEPTEMBER 2001
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
8 PINS SHOWN
0.020 (0,51)
0.014 (0,35)
0.050 (1,27)
8
0.010 (0,25)
5
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
1
4
0.010 (0,25)
0°– 8°
A
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
PINS **
0.004 (0,10)
8
14
16
A MAX
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MIN
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
DIM
4040047/E 09/01
NOTES: A.
B.
C.
D.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
Falls within JEDEC MS-012
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MPDS018E – FEBRUARY 1996 – REVISED FEBRUARY 2002
DBV (R-PDSO-G5)
PLASTIC SMALL-OUTLINE
0,95
5X
5
0,50
0,20 M
0,30
4
1,70
1,50
1
0,15 NOM
3,00
2,60
3
Gage Plane
3,00
2,80
0,25
0°–8°
0,55
0,35
Seating Plane
1,45
0,95
0,05 MIN
0,10
4073253-4/G 01/02
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC MO-178
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MPDS025C – FEBRUARY 1997 – REVISED FEBRUARY 2002
DCK (R-PDSO-G5)
PLASTIC SMALL-OUTLINE PACKAGE
0,30
0,15
0,65
5
0,10 M
4
1,40
1,10
1
0,13 NOM
2,40
1,80
3
Gage Plane
2,15
1,85
0,15
0°–8°
0,46
0,26
Seating Plane
1,10
0,80
0,10
0,00
0,10
4093553-2/D 01/02
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC MO-203
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MPDS028B – JUNE 1997 – REVISED SEPTEMBER 2001
DGK (R-PDSO-G8)
PLASTIC SMALL-OUTLINE PACKAGE
0,38
0,25
0,65
8
0,08 M
5
0,15 NOM
3,05
2,95
4,98
4,78
Gage Plane
0,25
1
0°– 6°
4
3,05
2,95
0,69
0,41
Seating Plane
1,07 MAX
0,15
0,05
0,10
4073329/C 08/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC MO-187
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright  2002, Texas Instruments Incorporated