ETC LMV358IDGKR

LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263D – AUGUST 1999 – REVISED APRIL 2002
D
D
D
D
D
2.7-V and 5-V Performance
No Crossover Distortion
Low Supply Current:
LMV321 . . . 130 µA Typ
LMV358 . . . 210 µA Typ
LMV324 . . . 410 µA Typ
Rail-to-Rail Output Swing
Package Options Include Plastic
Small-Outline (D), Small-Outline Transistor
(SOT-23 DBV, SC-70 DCK), Very Thin Shrink
Small-Outline (DGK), and Thin Shrink
Small-Outline (PW) Packages
LMV324 . . . D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN–
1IN+
VCC+
2IN+
2IN–
2OUT
The LMV321, LMV324, and LMV358 are the most
cost-effective solutions for applications where
low-voltage operation, space saving, and low
price are needed. They offer specifications that
meet or exceed those of the familiar LM358 and
LM324 devices. These devices have rail-to-rail
output-swing
capability,
and
the
input
common-mode voltage range includes ground.
They all exhibit excellent speed-to-power ratios,
achieving 1MHz of bandwidth at 1-V/µs slew rate
with low supply current.
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
LMV358 . . . D, DGK, OR PW PACKAGE
(TOP VIEW)
description
The LMV324 and LMV358 are low-voltage (2.7 V
to 5.5 V) versions of the dual and quad operational
amplifiers, LM324 and LM358, that operate from
5 V to 30 V. The LMV321 is the single-amplifier
version.
1
1OUT
1IN–
1IN+
GND
1
8
2
7
3
6
4
5
VCC+
2OUT
2IN–
2IN+
LMV321 . . . DBV OR DCK PACKAGE
(TOP VIEW)
1IN+
1
GND
2
IN–
3
5
VCC+
4
OUT
The LMV321 is available in the ultra-small DCK package, which is approximately one-half the size of the DBV
package. This package saves space on printed circuit boards and enables the design of small portable
electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise
pickup and increase signal integrity.
The LMV321I, LMV324I, and LMV358I devices are characterized for operation from –40°C to 85°C.
symbol (each amplifier)
–
IN –
OUT
+
IN +
Copyright  2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263D – AUGUST 1999 – REVISED APRIL 2002
AVAILABLE OPTIONS
TA
–40°C to 85°C
PACKAGE
TYPE
PACKAGED DEVICES
SINGLE
DUAL
QUADRUPLE
5-pin SOT
LMV321IDCKR
LMV321IDBVR
—
—
—
—
8-pin SOIC
8-pin TSSOP
8-pin VSSOP
—
—
—
LMV358ID
LMV358IPWR
LMV358IDGKR
—
—
—
14-pin SOIC
14-pin TSSOP
—
—
—
LMV324ID
LMV324IPWR
The D package is available taped and reeled. Add the suffix R to the device type (e.g.,
LMV324DR). The DCK, DBV, DGK, and PW packages are only available left-end taped and
reeled.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5.5 V
Input voltage, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5.5 V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,
VCC ≤ 5.5 V (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Package thermal impedance, θJA (see Notes 4 and 5): D (8-pin) package . . . . . . . . . . . . . . . . . . . . . . 97°C/W
D (14-pin) package . . . . . . . . . . . . . . . . . . . . 86°C/W
DBV package . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W
DCK package . . . . . . . . . . . . . . . . . . . . . . . . 252°C/W
DGK package . . . . . . . . . . . . . . . . . . . . . . . TBD°C/W
PW (8-pin) package . . . . . . . . . . . . . . . . . . . 149°C/W
PW (14-pin) package . . . . . . . . . . . . . . . . . . 113°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or PW package . . . . . . . . . . . . . . 260°C
DBV or DCK package . . . . . . . . . . . . . TBD
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65 to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+ with respect to IN–.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can impact reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
VCC
TA
2
MIN
MAX
Supply voltage (single-supply operation)
2.7
5.5
V
Operating free-air temperature
–40
85
°C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263D – AUGUST 1999 – REVISED APRIL 2002
electrical characteristics at TA = 25°C and VCC+ = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
1.7
7
UNIT
VIO
Input offset voltage
aVIO
Average temperature coefficient
of input offset voltage
IIB
IIO
Input bias current
11
250
nA
Input offset current
5
50
nA
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio
VCM = 0 to 1.7 V
VCC = 2.7 V to 5 V,
VICR
Common-mode input voltage range
CMRR
Output swing
RL = 10 kΩ to 1.35
1 35 V
ICC
Supply current
LMV358I (both amplifiers)
LMV324I (all four amplifiers)
260
680
B1
Unity-gain bandwidth
w 50 dB
High level
Low level
LMV321I
Fm
mV/°C
5
VO = 1 V
CL = 200 pF
Phase margin
mV
50
63
dB
50
60
dB
0 to 1.7
–0.2 to 1.9
V
VCC–100
VCC–10
60
180
80
170
140
340
mV
mA
1
MHz
60
deg
Gm
Gain margin
10
dB
Vn
In
Equivalent input noise voltage
f = 1 kHz
46
nV/√Hz
Equivalent input noise current
f = 1 kHz
0.17
pA/√Hz
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
SLOS263D – AUGUST 1999 – REVISED APRIL 2002
electrical characteristics at specified free-air temperature range, VCC+ = 5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
aV
Average temperature coefficient
of input offset voltage
IO
IIB
Input bias current
IIO
Input offset current
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio
VICR
Common-mode
input voltage range
TEST CONDITIONS
VCM = 0 to 4 V
VCC= 2.7 V to 5 V, VO = 1 V,
VCM = 1 V
CMMR
w 50 dB
High level
RL = 10 kΩ to 2.5
25V
Low level
RL = 2 kΩ
Sourcing, VO = 0 V
25°C
5
25°C
15
4
CL = 200 pF
nA
nA
65
dB
25°C
50
60
dB
25°C
0 to 4
–0.2
0 2 to 4
4.2
2
V
25°C
VCC–300
VCC–400
VCC–40
–40°C to 85°C
25°C
120
–40°C to 85°C
25°C
–40°C to 85°C
VCC–10
65
–40°C to 85°C
mV
180
280
25°C
15
–40°C to 85°C
10
100
5
60
10
160
130
V/mV
mA
250
350
210
–40°C to 85°C
25°C
300
400
VCC–100
VCC–200
25°C
25°C
LMV324I (all four amplifiers)
50
150
–40°C to 85°C
LMV358I (both amplifiers)
250
50
25°C
Supply current
mV
mV/°C
500
5
UNIT
25°C
25°C
Sinking, VO = 5 V
LMV321I
ICC
7
9
25°C
Output swing
Output short
short-circuit
circuit current
MAX
1.7
–40°C to 85°C
Low level
IOS
TYP
–40°C to 85°C
RL = 2 kΩ to 2
2.5
5V
AVD
MIN
–40°C to 85°C
High level
Large-signal
g
g
differential
voltage gain
TA
25°C
440
615
410
–40°C to 85°C
mA
830
1160
B1
Unity-gain bandwidth
25°C
1
MHz
fm
Phase margin
25°C
60
deg
Gm
Gain margin
25°C
10
dB
Vn
In
Equivalent input noise voltage
f = 1 kHz
25°C
39
nV/√Hz
Equivalent input noise current
f = 1 kHz
25°C
0.21
pA/√Hz
SR
Slew rate
25°C
1
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
V/ms
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright  2002, Texas Instruments Incorporated