SLOS097C − MARCH 1991 − REVISED AUGUST 1996 D D D D D D D Low Input Offset Voltage . . . 3 mV Max Wide Gain-Bandwidth Product . . . 4.5 MHz High Slew Rate . . . 13 V/µs Fast Settling Time . . . 1.1 µs to 0.1% Wide-Range Single-Supply Operation 4 V to 44 V Wide Input Common-Mode Range Includes Ground (VCC −) Low Total Harmonic Distortion . . . 0.02% D D D D D (A Suffix) Large Output Voltage Swing −14.7 V to 14 V (With ± 15-V Supplies) Large Capacitance Drive Capability 10,000 pF Excellent Phase Margin . . . 60° Excellent Gain Margin . . . 12 dB Output Short-Circuit Protection D OR P PACKAGE (SINGLE, TOP VIEW) OFSET N1 IN − IN + VCC − /GND 1 8 2 7 3 6 4 5 D OR P PACKAGE (DUAL, TOP VIEW) NC VCC + OUT OFSET N2 1OUT 1IN − 1IN + VCC − /GND DW PACKAGE (QUAD, TOP VIEW) 1OUT 1IN − 1IN + VCC + 2IN + 2IN − 2OUT NC 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 1 8 2 7 3 6 4 5 VCC + 2OUT 2IN − 2IN + N PACKAGE (QUAD, TOP VIEW) 4OUT 4IN − 4IN + VCC − /GND 3IN + 3IN − 3OUT NC 1OUT 1IN − 1IN + VCC + 2IN + 2IN − 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN − 4IN + VCC − /GND 3IN + 3IN − 3OUT NC − No internal connection AVAILABLE OPTIONS PACKAGE TA COMPLEXITY 0°C 0 C to 70°C −40 C −40°C to 105°C PLASTIC DIP SMALL OUTLINE STANDARD GRADE PRIME GRADE STANDARD GRADE PRIME GRADE Single Dual Quad TL34071P TL34072P TL34074N TL34071AP TL34072AP TL34074AN TL34071D TL34072D TL34074DW TL34071AD TL34072AD TL34074ADW Single Dual Quad TL33071P TL33072P TL33074N TL33071AP TL33072AP TL33074AN TL33071D TL33072D TL33074DW TL33071AD TL33072AD TL33074ADW −55 C −55°C to 125°C Single TL35071P TL35071AP TL35071D TL35071AD TL35072P TL35072AP TL35072D TL35072AD Dual Quad TL35074N TL35074AN TL35074DW TL35074ADW D and DW packages are available taped and reeled. Add R suffix to device type (e.g., TL34071ADR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1996, Texas Instruments Incorporated !"#$%! & '("")% $& ! *(+,'$%! -$%). "!-('%& '!!"# %! &*)''$%!& *)" %/) %)"#& ! )$& &%"(#)%& &%$-$"- 0$""$%1. "!-('%! *"!')&&2 -!)& !% )')&&$",1 ',(-) %)&%2 ! $,, *$"$#)%)"&. • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 1 SLOS097C − MARCH 1991 − REVISED AUGUST 1996 description Quality, low cost, bipolar fabrication with innovative design concepts are employed for the TL33071/2/4, TL34071/2/4, and TL35071/2/4 series of monolithic operational amplifiers. This series of operational amplifiers offers 4.5 MHz of gain bandwidth product, 13 V/µs slew rate, and fast settling time without the use of JFET device technology. Although this series can be operated from split supplies, it is particularly suited for single-supply operation since the common-mode input voltage range includes ground potential (VCC −). With a Darlington transistor input stage, this series exhibits high input resistance, low input offset voltage, and high gain. The all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing, provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency output impedance, and symmetrical source/sink ac frequency response. The TL34071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified over the commercial (0°C to 70°C) temperature range. The TL33071/2/4 devices are available in standard or prime performance (A-suffix) grades and are specified over industrial/vehicular (−40°C to 105°C) temperature range. The TL35071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified over the military (− 55°C to 125°C) temperature range. These low-cost amplifiers are available in single, dual, and quad configurations and are pin compatible with the MC33071/2/4, MC34071/2/4, and MC35071/2/4 series of amplifiers. Packaging options include standard plastic DIP and SO packages. symbol Single Dual and Quad (per amplifier) OFFSET N1 IN + + IN − − IN + + IN − − OUT OFFSET N2 2 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • OUT SLOS097C − MARCH 1991 − REVISED AUGUST 1996 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Supply voltage, VCC − . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −22 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 44 V Input voltage, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC ± Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Total current out of VCC − . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: TL3307x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 105°C TL3407x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C TL3507x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds: D, DW, N, or P package . . . . . . . . . 260°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC −. 2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows if input is brought below VCC − −0.3 V. 3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE D DW N P TA ≤ 25 25°C C POWER RATING 725 mW 1025 mW 1150 mW 1000 mW DERATING FACTOR ABOVE TA = 25°C TA = 70 70°C C POWER RATING TA = 105 105°C C POWER RATING TA = 125 125°C C POWER RATING 5.8 mW/ mW/°C C 8.2 mW/ mW/°C C 9.2 mW/ mW/°C C 8.0 mW/°C mW/ C 464 mW 656 mW 736 mW 640 mW 261 mW 369 mW 414 mW 360 mW 145 mW 205 mW 230 mW 200 mW recommended operating conditions TL3307x Supply voltage, VCC ± Common-mode input voltage, VIC VCC = 5 V VCC ± = ± 15 V Operating free-air temperature, TA • TL3507x MAX MIN MAX MIN MAX ±2 ± 22 ±2 ± 22 ±2 ± 22 0 2.7 0 2.9 0 2.7 −15 12.7 −15 12.9 −15 12.7 −40 105 0 70 −55 125 POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • TL3407x MIN UNIT V V °C 3 SLOS097C − MARCH 1991 − REVISED AUGUST 1996 electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current TEST CONDITIONS TA† TL3x07xA MIN TYP‡ MAX VCC = 5 V 25°C 0.5 3 1.5 5 25°C 0.5 3 1.0 5 VIC = 0, VO = 0, RS = 50 Ω VCC = ± 15 V Full range VCC = ± 15 V Full range 10 VCC = ± 15 V 25°C 7 Full range VCC = 5 V Full range 5 Input bias current VCC = ± 15 V VICR VOH VOL Common-mode input voltage range High-level output voltage Low-level output voltage −0.8 −0.7 Full range −2 −0.8 −1.5 −0.7 −1.5 25°C Full range −15 to 12.8 −15 to 12.8 V 3.7 4 3.7 4 RL = 10 kΩ 25°C 13.6 14 13.6 14 RL = 2 kΩ Full range 13.4 V 13.4 VCC + = 5 V, VCC − = 0, RL = 2 kΩ 25°C 0.1 0.3 0.1 0.3 RL = 10 kΩ 25°C −14.7 −14.3 −14.7 −14.3 RL = 2 kΩ Full range IOS Short-circuit output current CMRR Common-mode rejection ratio VIC = VICRmin, RS = 50 Ω kSVR Supply-voltage rejection ratio (∆VCC ± /∆VIO) VCC ± = ± 13.5 V to ± 16.5 V, RS = 100 Ω VO = ± 10 V, RL = 2 kΩ Source: VID = 1 V, VO = 0 Sink: VID = − 1 V, VO = 0 −13.5 Full range 25 100 No Load 100 V/mV −10 −30 −10 −30 20 30 20 30 25°C 80 97 70 97 dB 25°C 80 97 70 97 dB 25°C 3.5 Full range VCC + = 5 V, VCC − = 0, VO = 0, No Load V −13.5 25 20 25°C VO = 0, A µA −1.8 −15 to 13.2 50 nA −2 −2.3 −1.8 25°C mV 100 250 25°C Large-signal differential voltage amplification Supply current (per channel) 7 VCC + = 5 V, VCC − = 0, RL = 2 kΩ AVD ICC 100 −15 to 13.2 RS = 50 Ω UNIT µV/°C 10 −2.3 25°C MAX 7 250 25°C IIB TL3x07x MIN TYP‡ 25°C 4.5 3.5 4.7 3.4 4.4 mA 4.5 4.7 3.4 4.4 mA Full range 4.6 4.6 † Full range is 0°C to 70°C for the TL3407x devices, and − 40°C to 105°C for the TL3307x devices, and − 55°C to 125°C for the TL3507x devices. ‡ All typical values are at TA = 25°C. 4 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • SLOS097C − MARCH 1991 − REVISED AUGUST 1996 operating characteristics, VCC± = ±15 V, TA = 25°C TL3x07xA PARAMETER TEST CONDITIONS SR + Positive slew rate SR − Negative slew rate VI = − 10 V to 10 V, RL = 2 kΩ ts Settling time AVD = − 1, 10-V step Vn In Equivalent input noise voltage f = 1 kHz, Equivalent input noise current THD GBW AV = 1 AV = − 1 MIN TYP 8 10 TL3x07x MAX MIN TYP 8 10 MAX UNIT V/ s V/µs 13 13 To 0.1% 1.1 1.1 To 0.01% 2.2 2.2 32 32 nV/√Hz f = 1 kHz 0.22 0.22 pA/√Hz Total harmonic distortion VO = 2 V to 20 V, RL = 2 kΩ, AVD = 10, f = 10 kHz 0.02 0.02 % Gain-bandwidth product f =100 kHz 4.5 MHz BW Power bandwidth RL = 2 kΩ, AVD = 1, VO(PP) = 20 V, THD = 5.0% 200 200 kHz φm RL = 2 kΩ, CL = 0 60° 60° Phase margin RL = 2 kΩ, RL = 2 kΩ, CL = 300 pF 40° 40° 12 12 RL = 2 kΩ, CL = 300 pF 4 4 Gain margin RS = 100 Ω 3.5 4.5 CL = 0 3.5 µss dB ri Differential input resistance 150 MΩ Input capacitance VIC = 0 VIC = 0 150 Ci 2.5 2.5 pF Channel separation f = 10 kHZ 120 120 dB Open-loop output impedance f = 1 MHZ 30 30 Ω zo • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 5 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2008, Texas Instruments Incorporated