Numeric Display 7.6 mm (.3”) Series 10.0 ± 0.2 Lighting Color 3 Cathode d 14 4 Cathode c 2 13 5 Cathode e 12 6 Anode e 7 a d c 10 9 6 9 10 7 8 11 Anode c dp1 Anode dp2 −−− dp1 Cathode dp2 Cathode b 12 Cathode a 13 Anode a 14 Anode b 4 5 11 e b dp1 8 dp2 2.54 × 6 = 15.24 3.0 0.5 2.2 −−− 1 3.5 Min. 0.5 Pin Assignment No. 1 Anode d 2 3 3.6 LN503R ····················· LNM273ZA01 ·········· Red LN503G ····················· LNM373ZA01 ·········· Green LN503Y ····················· LNM473ZA01 ·········· Amber Terminal Connection 5.5 ± 0.2 10° *2.54 ± 0.1 Global Prat No. 19.0 ± 0.2 Conventional Part No. Unit: mm 1.4 0.3 *7.6 ± 0.38 Lead wire dimension ■ Absolute Maximum Ratings (Ta = 25°C) Lighting Color Red Green Amber PD(mW) 60 60 60 IFP(mA)∗ 100 100 100 IF(mA) 20 20 20 VR(V) 5 5 5 Topr(°C) −25 ∼ +80 −25 ∼ +80 −25 ∼ +80 Tstg(°C) −30 ∼ +85 −30 ∼ +85 −30 ∼ +85 Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec ■ Electro−Optical Characteristics (Ta = 25°C) Conventional Part No. LN503R LN503G LN503Y Unit Lighting Color Red Green Amber − Common − − − − IO / seg IO /d.p IF Typ Min Typ 5 400 150 150 10 1200 400 400 10 600 200 200 µcd µcd µcd mA IO IF Typ 2.2 2.2 2.2 V λP Typ 700 565 590 nm VF Max 2.8 2.8 2.8 V ∆λ Typ 100 30 30 nm IF VF 10000 IF 20 20 20 mA IR Max 10 10 10 µA VR 5 5 5 V IF T a 100 25 R 03 LN5 500 300 100 1 5 10 Forward Current 280 10 5 30 50 100 1 LN 3 3 Forward Current 1000 20 30 50 3Y LN50 LN50 3R 3G 50 3000 Forward Current LN 50 3G 3Y 50 LN Luminous Intensity 5000 15 10 5 0 1.6 1.8 2.0 2.2 Forward Voltage 2.4 0 20 40 60 80 Ambient Temperature 100 Caution for Safety Gallium arsenide material (GaAs) is used in this product. DANGER Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR