Series PF, PowerFin™ Up to 25Amp • 120/240, 380, 480 Vac • AC Output Crydom’s PowerFin™ series delivers the highest ratings of any single in-line package (SIP). The integral heat sink design can operate at 25 amps RMS in forced air at 85˚C case temp. With natural convection in free air, it rates 10 amps RMS at 25˚C ambient. • Ultra High Steady State Current Rating • Low Leakage (Off-State) • SCR Output • AC or DC Control • Crydom’s Patented Design MODEL NUMBERS Built-in advantages include Surface Mount Technology and SCR output. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. AC CONTROL (120Vac) (24Vac) PF240A25 PFE240A25 DC CONTROL PF240D25 PFE240D25 PF380D25 PFE380D25 PF480D25 PFE480D25 12-280 48-530 48-660 (5Vdc) (24Vdc) OUTPUT SPECIFICATIONS ➀ Operating Voltage (47-63 Hz) [Vrms] Forced Air.06-25 ➂ Convection Air .06-10 Load Current Range [Arms] Transient Overvoltage [Vpk] 600 1200 1200 Max. Surge Current, (16.6ms) [Apk] 250 250 250 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 260 260 Max. Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁ 500 500 500 Max. Turn-On Time ➃ 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec (AC Control) 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS ➀ Nominal Voltage 0.5 DC CONTROL 5Vdc 5Vdc PF240D25 Control Voltage Range 0.5 AC CONTROL 120Vac 24Vac PF380D25 PF480D25 24Vdc PFE240D25 PFE380D25 PFE480D25 PF240A25 PFE240A25 3-15 Vdc 4-15 Vdc 15-32 Vdc 90-140 Vrms 18-36 Vrms Max. Turn-On Voltage 3.0 Vdc 4.0 Vdc 15.0 Vdc 90.0 Vrms 18.0 Vrms Min. Turn-Off Voltage 1.0 Vdc 1.0 Vdc 1.0 Vdc 10.0 Vrms 2.0 Vrms Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1k Ohm 4.2k Ohm Typical Input Current @ Nominal Voltage 15 mAdc 15 mAdc 15 mAdc 10 mArms 5 mArms MODEL NUMBERS GENERAL NOTES ©1998 CRYDOM CORP, Specifications subject to change without notice. ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ Heatsink temperature 85˚C Maximum. ➃ Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). FastFax Document No. 115 SERIES PF.110598, PAGE 1 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] 9002 Series PF, PowerFin™ Up to 25Amp • 120/240, 380, 480 Vac • AC Output GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output 8 pF Ambient Operating Temperature Range -30 to 80ºC Ambient Storage Temperature Range -30 to 125ºC MECHANICAL SPECIFICATIONS Weight: (typical) .85 oz. (25g) Encapsulation: Thermally Conductive Epoxy 1.6 TYP. (38.1) AVAILABLE OPTIONS R Random Turn-On (AC & DC Control, 240V Only) Phase Controllable (DC Control, 240V Only) Example: PF240A25R, PFE240D25R 1.35 MAX. (34.3) .050 (1.3) 4 3 2 .300 (7.6) TYP. 1 .72 (18.3) TYP. .200 (5.1) .700 (17.8) 1.100 (27.9) 1.70 (43.1) .900 (22.8) DC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL .040 (1.0) DIA. 4 PLACES All dimensions are in inches (millimeters) AC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: AC CONTROL PIN 4: AC CONTROL 10 LOAD CURRENT (AMPS) LOAD CURRENT (AMPS) CURRENT DERATING CURVES 8 6 4 2 0 0 10 20 30 40 50 60 70 80 25 20 15 10 5 0 0 20 40 60 80 100 120 AMBIENT TEMPERATURE (C˚) HEATSINK TEMPERATURE (C˚) Fig.1 Convection Cooling Fig.2 Forced Air Cooling 140 ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL E116950 VDE 70938 (DC Control Only) FastFax Document No. 115 SERIES PF.110598, PAGE 2 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] 9002