Series CMRD24/CMRA24 35-65Amp • 240 Vac • AC Output • Zero Voltage and Random Turn-On Switching Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross or random turn-on versions. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. • DIN Rail & Panel Mount • Status Indicating LED • DC or AC Control MODEL NUMBERS CMRD2435 CMRA2435 CMRD2445 CMRA2445 CMRD2455 CMRA2455 CMRD2465 CMRA2465 24-280 24-280 24-280 24-280 35 45 55 65 Min. Load Current, [Arms] 0.15 0.15 0.25 0.25 Transient Overvoltage [Vpk] 600 600 600 600 Max. Surge Current, (16.6ms) [Apk] 250 625 1000 1200 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.02 0.63 0.31 0.28 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1620 4150 6000 10 10 10 10 500 500 500 500 OUTPUT SPECIFICATIONS ➀ Operating Voltage (47-63 Hz) [Vrms] Max. Load Current @ 25˚C Ambient Temperature [Arms] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ Max. Turn-On Time ➂ 1/2 Cycle (DC Control), 10.0 msec (AC Control) 1/2 Cycle (DC Control), 40.0 msec(AC Control) Max. Turn-Off Time 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS➀ DC CONTROL AC CONTROL 0.5 0.5 GENERAL SPECIFICATIONS Control Voltage Range 3-32 Vdc 90-140 Vrms Max. Reverse Voltage 32 Vdc — Max. Turn-On Voltage 3.0 Vdc 90 Vrms Max. Capacitance Input/Output 1.0 Vdc 10 Vrms Ambient Operating Temperature Range 30.0mA➃ — Min. Turn-Off Voltage Max. Input Current Typical Input Current 17mA @ 5 Vdc 15mA @ 120 Vrms GENERAL NOTES ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ Turn-on time for DC control random turn-on versions is 0.02msec. ➃ Input circuitry incorporates active current limiter. 0.5 Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc 8 pF -40 to 80ºC -40 to 125ºC Ambient Storage Temperature Range Green LED Status Indicating Display MECHANICAL SPECIFICATIONS 16.8 oz. (476g) Weight: (typical) Encapsulation: Thermally Conductive Epoxy Terminals: Cage Type Maximum Wire Size- Output: AWG6 (4.1mm) Input: AWG10 (2.6mm) ©1998 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 171 CMRD/CMRA.072398, PAGE 1 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMRD24/CMRA24 35-65Amp • 240 Vac • AC Output 1.0 (25.4) 0.75 (19.1) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. MECHANICAL SPECIFICATIONS TU INP S All dimensions are in inches (millimeters) U T STA INPUT 2.5 (63.5) 3.0 (76.2) 3.5 (88.9) SOLID STATE RELAY CURRENT DERATING CURVES OUTPUT 35 A OUTPUT CURRENT (Arms) 60 50 40 1.75 (44.5) 30 20 3.0 (76.2) .9 (22.9) 10 10 20 30 40 50 60 AMBIENT TEMPERATURE (ºC) 70 80 45 A OUTPUT CURRENT (Arms) 60 50 HEAT SINK: BLACK ANODIZED ALUMINUM 40 30 4.3 (109.2) 20 10 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) 55 A OUTPUT CURRENT (Arms) 90 75 60 45 30 AVAILABLE OPTIONS 15 10 20 30 40 50 60 AMBIENT TEMPERATURE (ºC) 70 80 E 65 A 90 OUTPUT CURRENT (Arms) -10 Random Turn-On, Phase Controllable Example: CMRD2435-10 24 Vac Input (18-36 Vac) Example: CMRA2435E 75 60 45 30 15 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL PENDING CSA PENDING VDE PENDING FastFax Document No. 171 CMRD/CMRA.072398, PAGE 2 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMRD48/CMRA48 35-65Amp • 480 Vac • AC Output • Zero Voltage and Random Turn-On Switching Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross or random turnon versions. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. • DIN Rail & Panel Mount • Status Indicating LED • DC or AC Control MODEL NUMBERS CMRD4835 CMRA4835 CMRD4845 CMRA4845 CMRD4855 CMRA4855 CMRD4865 CMRA4865 48-530 48-530 48-530 48-530 35 45 55 65 Min. Load Current, [Arms] 0.15 0.15 0.25 0.25 Transient Overvoltage [Vpk] 1200 1200 1200 1200 Max. Surge Current, (16.6ms) [Apk] 250 625 1000 1200 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7 Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.02 0.63 0.31 0.28 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1620 4150 6000 10 10 10 10 500 500 500 500 OUTPUT SPECIFICATIONS ➀ Operating Voltage (47-63 Hz) [Vrms] Max. Load Current @ 25˚C Ambient Temperature [Arms] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ Max. Turn-On Time➂ 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec(AC Control) 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS➀ 0.5 0.5 DC CONTROL AC CONTROL GENERAL SPECIFICATIONS Control Voltage Range 4-32 Vdc 90-140 Vrms Dielectric Strength 50/60Hz Input/Output/Base Max. Reverse Voltage 32 Vdc — Max. Turn-On Voltage 4.0 Vdc 90 Vrms Max. Capacitance Input/Output 1.0 Vdc 10 Vrms Ambient Operating Temperature Range 30.0mA➃ — Min. Turn-Off Voltage Max. Input Current Typical Input Current 14mA @ 5 Vdc 15mA @ 120 Vrms GENERAL NOTES ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ Turn-on time for DC control random turn-on versions is 0.02msec. ➃ Input circuitry incorporates active current limiter. 0.5 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc 8 pF -40 to 80ºC -40 to 125ºC Ambient Storage Temperature Range Green LED Status Indicating Display MECHANICAL SPECIFICATIONS 16.8 oz. (476g) Weight: (typical) Encapsulation: Thermally Conductive Epoxy Terminals: Cage Type Maximum Wire Size- Output: AWG6 (4.1mm) Input: AWG10 (2.6mm) ©1998 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 171 CMRD/CMRA.072398, PAGE 3 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMRD48/CMRA48 35-65Amp • 480 Vac • AC Output 1.0 (25.4) 0.75 (19.1) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. MECHANICAL SPECIFICATIONS U TU INP S All dimensions are in inches (millimeters) T STA INPUT 2.5 (63.5) 3.0 (76.2) 3.5 (88.9) SOLID STATE RELAY CURRENT DERATING CURVES OUTPUT 35 A OUTPUT CURRENT (Arms) 60 50 40 1.75 (44.5) 30 20 3.0 (76.2) .9 (22.9) 10 10 20 30 40 50 60 AMBIENT TEMPERATURE (ºC) 70 80 45 A OUTPUT CURRENT (Arms) 60 50 HEAT SINK: BLACK ANODIZED ALUMINUM 40 30 4.3 (109.2) 20 10 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) 55 A OUTPUT CURRENT (Arms) 90 75 60 45 30 AVAILABLE OPTIONS 15 10 20 30 40 50 60 AMBIENT TEMPERATURE (ºC) 70 80 E 65 A 90 OUTPUT CURRENT (Arms) -10 Random Turn-On, Phase Controllable Example: CMRD4835-10 24 Vac Input (18-36 Vac) Example: CMRA4835E 75 60 45 30 15 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL PENDING CSA PENDING VDE PENDING FastFax Document No. 171 CMRD/CMRA.072398, PAGE 4 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMRD60/CMRA60 35-65Amp • 600 Vac • AC Output • Zero Voltage and Random Turn-On Switching Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross or random turn-on versions. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. • DIN Rail & Panel Mount • Status Indicating LED • DC or AC Control MODEL NUMBERS CMRD6035 CMRA6035 CMRD6045 CMRA6045 CMRD6055 CMRA6055 CMRD6065 CMRA6065 Nominal LIne Voltage (±10%) [Vrms] 600 600 600 600 Operating Voltage (47-63 Hz) [Vrms] 48-660 48-660 48-660 48-660 35 45 55 65 Min. Load Current, [Arms] 0.15 0.15 0.25 0.25 Transient Overvoltage [Vpk] 1200 1200 1200 1200 Max. Surge Current, (16.6ms) [Apk] 250 625 1000 1200 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7 Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.02 0.63 0.31 0.28 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1620 4150 6000 Max. Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ 500 500 500 500 OUTPUT SPECIFICATIONS ➀ Max. Load Current @ 25˚C Ambient Temperature [Arms] Max. Turn-On Time➂ 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec(AC Control) 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS ➀ 0.5 0.5 DC CONTROL AC CONTROL GENERAL SPECIFICATIONS Control Voltage Range 4-32 Vdc 90-140 Vrms Dielectric Strength 50/60Hz Input/Output/Base Max. Reverse Voltage 32 Vdc — Max. Turn-On Voltage 4.0 Vdc 90 Vrms Max. Capacitance Input/Output 1.0 Vdc 10 Vrms Ambient Operating Temperature Range 30.0mA➃ — Min. Turn-Off Voltage Max. Input Current Typical Input Current GENERAL NOTES 14mA @ 5 Vdc 15mA @ 120 Vrms ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ Turn-on time for DC control random turn-on versions is 0.02msec. ➃ Input circuitry incorporates active current limiter. 0.5 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc 8 pF -40 to 80ºC -40 to 125ºC Ambient Storage Temperature Range Green LED Status Indicating Display MECHANICAL SPECIFICATIONS 16.8 oz. (476g) Weight: (typical) Encapsulation: Thermally Conductive Epoxy Terminals: Cage Type Maximum Wire Size- Output: AWG6 (4.1mm) Input: AWG10 (2.6mm) ©1998 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 171 CMRD/CMRA.072398, PAGE 5 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMRD60/CMRA60 35-65Amp • 600 Vac • AC Output 1.0 (25.4) 0.75 (19.1) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. MECHANICAL SPECIFICATIONS U TU INP S All dimensions are in inches (millimeters) T STA INPUT 2.5 (63.5) 3.0 (76.2) 3.5 (88.9) SOLID STATE RELAY CURRENT DERATING CURVES OUTPUT 35 A OUTPUT CURRENT (Arms) 60 50 40 1.75 (44.5) 30 20 3.0 (76.2) .9 (22.9) 10 10 20 30 40 50 60 AMBIENT TEMPERATURE (ºC) 70 80 45 A OUTPUT CURRENT (Arms) 60 50 HEAT SINK: BLACK ANODIZED ALUMINUM 40 30 4.3 (109.2) 20 10 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) 55 A OUTPUT CURRENT (Arms) 90 75 60 45 30 AVAILABLE OPTIONS 15 10 20 30 40 50 60 AMBIENT TEMPERATURE (ºC) 70 80 E 65 A 90 OUTPUT CURRENT (Arms) -10 Random Turn-On, Phase Controllable Example: CMRD6035-10 24 Vac Input (18-36 Vac) Example: CMRA6035E 75 60 45 30 15 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL PENDING CSA PENDING VDE PENDING FastFax Document No. 171 CMRD/CMRA.072398, PAGE 6 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected]