ER100 THRU ER106 SUPERFAST RECOVERY RECTIFIERS VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere FEATURES l Superfast recovery times-epitaxial construction l Low forward voltage, high current capability DO-41 l l Exceeds environmental standards of MIL-S-19500/228 Hermetically sealed l l Low leakage High surge capability l Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound MECHANICAL DATA Case: Molded plastic, DO-41 Terminals: Axial leads, solderable to MIL-STD-202, Method 208 Polarity: Color Band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead length at TA=55 ¢J ER100 ER101 ER101A ER102 ER103 ER104 ER106 UNITS 50 35 50 100 70 100 150 105 150 200 140 200 1.0 300 210 300 400 320 400 600 420 600 V V Peak Forward Surge Current, IFM (surge): 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 1.0A DC A 30.0 5.0 V £g A 150 £g A .95 Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage TA=125 ¢J Maximum Reverse Recovery Time(Note 1) Typical Junction capacitance (Note 2) Typical Junction Resistance(Note 3) R £KJA Operating and Storage Temperature Range TJ V A 1.25 35.0 17 50 -55 to +150 1.7 ns PF ¢J /W ¢J NOTES: 1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 3. Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted RATING AND CHARACTERISTIC CURVES FORWARD SURGE CURRENT, AMPERES pk (HALF SINE WAVE) ER100 THRU ER106 0 -0.25 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. -1.0 SET TIME BASE FOR Source Impedance = 50 Ohms 1cm 50 ns/cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND 1.6 1.4 MAXIMUM AVERAGE CURRENT RATING 1.2 SINGLE PHASE, HALF WAVE, 60Hz RESISTIVE OR INDUCTIVE LOAD .375"(9.5mm) LEAD LENGTHS 1.0 .8 .6 .4 .2 0 0 40 20 60 80 100 120 140 160 AMBIENT TEMPERATURE, ¢J Fig. 3-MAXIMUM AVERAGE FORWARD CURRENT RATING 180 24 18 12 6 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz Fig. 2-MAXIMUM NON-REPEITIVE SURGE CURRENT 10 ER100 ~ ER102 1.0 0.1 ER103 ~ ER104 ER106 0.01 TJ = 25 ¢J 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE VOLTS 1000 Fig. 4-FORWARD CURRENT DERATING CURVE TJ = 125 ¢J 100 TJ = 75 ¢J JUNCTION CAPACITANCE, pF IR-REVERSE LEAKAGE CURRENT MICROAMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES TEST CIRCUIT DIAGRAM 30 INSTANTANEOUS FORWARD CURRENT AMPERES trr +0.5A 10 TJ = 25 ¢J 1.0 0.1 20 40 60 80 100 120 % OF PIV, VOLTS Fig. 5-TYPICAL REVERSE CHARACTERISTICS 100 TJ = 25 ¢J f = 1.0MHz Vsig = 50mVp-p 10 1 0.1 1 10 REVERSE VOLTAGE, VOLTS Fig. 6-TYPICAL JUNCTION CAPACITANCE 100