MICROCIRCUIT DATA SHEET Original Creation Date: 07/06/95 Last Update Date: 09/26/96 Last Major Revision Date: 07/06/95 MJLM120-15-K REV 0BL VOLTAGE REGULATOR -15 VOLTS AT 1.0A Industry Part Number NS Part Numbers LM120 JL120-15BYA JL120-15SYA Prime Die LM120 Controlling Document 38510/11507, AMEND.1 REV A Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MJLM120-15-K REV 0BL Electrical Characteristics DC PARAMETERS SYMBOL Vout PARAMETER Output Voltage CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS Vin = -18.5, Il = 5mA -15.75 -14.25 V 1, 2, 3 Vin = -18.5, Il = 1A -15.75 -14.25 V 1, 2, 3 Vin = -30V, Il = 5mA -15.75 -14.25 V 1, 2, 3 Vin = -30V, Il = 1A -15.75 -14.25 V 1, 2, 3 Vin = -35V, Il = 5mA -15.75 -14.25 V 1, 2, 3 Vin = -35V, Il = 0.1A -15.75 -14.25 V 1, 2, 3 Vrline Line Regulation -35V < Vin < -18.5V, Il = 0.5A -150 150 mV 1, 2, 3 Vrload Load Regulation Vin = -20V, 5mA < Il < 1A -300 300 mV 1, 2, 3 Vin = -35V, 5mA < Il < 0.1A -450 450 mV 1, 2, 3 Vin = -20V, Il = 5mA 0.5 3 mA 1, 2, 3 Vin = -35V, Il = 5mA 0.5 4 mA 1, 2, 3 Iscd Standby Current Drain Delta Iscd(line) Standby Current Drain Change (vs. Line Current) -35V < Vin < -18.5V, Il = 5mA -1 1 mA 1, 2, 3 Delta Iscd(load) Standby Current Drain Change (vs. Load Current) Vin = -20V, 5mA < Il < 1A -0.5 0.5 mA 1, 2, 3 Ios Output Short Circuit Current Vin = -20V 0 3.5 A 1, 2, 3 Vin = -35V 0 2 A 1, 2, 3 4 Ipk Peak Output Current Vin = -18.5V, forced Delta Vout = 1.43V 1 A 1, 2, 3 Vstart Voltage Startup Vin = -30V, Rl = 15 Ohms -15.75 -14.25 V 1, 2, 3 Vrth Thermal Regulation Vin = -25V, Il = 1A -150 150 mV 1 Output Voltage Vin = -20V, Il = 5mA -15.9 -14.1 V 2 Vout 1, 4 2 MICROCIRCUIT DATA SHEET MJLM120-15-K REV 0BL Electrical Characteristics AC PARAMETERS SYMBOL PARAMETER CONDITIONS NOTES Delta Vin/Delta Vout Ripple Rejection Vin = -20V, Il = 350mA, ei = 1Vrms at f = 2400Hz Vno Output Noise Voltage Vin = -20V, Il = 0.1A Delta Vout/Delta Vin Line Transient Response Vin = -20V, Vpulse = -3V, Il = 5mA Delta Vout/Delta Il Load Transient Response Vin = -20V, Il = 100mA, Delta Il = 400mA PINNAME MIN MAX 50 UNIT dB SUBGROUPS 4, 5, 6 700 uVrms 7 2 90 mV 7 3 1 V 7 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: "Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 only". Vout Iscd Output Voltage Standby Current Drain Note Note Note Note 1: 2: 3: 4: Vin = -18.5V, Il = 5mA -0.15 0.15 V 1 Vin = -18.5V, Il = 1A -0.15 0.15 V 1 Vin = -30V, Il = 5mA -0.15 0.15 V 1 Vin = -30V, Il = 1A -0.15 0.15 V 1 Vin = -35V, Il = 5mA -0.15 0.15 V 1 Vin = -35V, Il = 0.1A -0.15 0.15 V 1 Vin = -35V, Il = 5mA -20 20 % 1 Tested at +125 C, correlated to TA = +150 C for National Die. S/S limit of 30mV/V is equivalent to 90mV. S/S limit of 2.5mV/mA is equivalent to 1V. Vout = +150 C at Subgroup 2. 3 MICROCIRCUIT DATA SHEET MJLM120-15-K REV 0BL Graphics and Diagrams GRAPHICS# DESCRIPTION 09107HR (blank) K02CRB (blank) See attached graphics following this page. 4