MICROCIRCUIT DATA SHEET Original Creation Date: 08/08/95 Last Update Date: 11/18/98 Last Major Revision Date: 08/08/95 MNLM150-X REV 0BL 3-AMP ADJUSTABLE REGULATORS Industry Part Number NS Part Numbers LM150 LM150K STEEL LM150K/883* Prime Die LM150 Controlling Document 5962-8767501XA* Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5004 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNLM150-X REV 0BL Electrical Characteristics DC/AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vdf = 5V, Vout = Vref, Iout = 1.5A. Pre Burn-In stress tests per RPI-5-024. SYMBOL Vref Vline Vload PARAMETER CONDITIONS NOTES Reference Voltage Line Regulation Load Regulation Iadj Adjust Pin Current Vdf = 3.0V, Il = 10mA 1.2 1.3 V 1, 2, 3 Vdf = 3.0V, Il = 3.0A 1.2 1.3 V 1, 2, 3 Vdf = 35V, IL = 10mA 1.2 1.3 V 1, 2, 3 Vdf = 10V, IL = 3.0A 6 1.2 1.3 V 1, 2, 3 Vdf = 30V, IL = 300mA 6 1.2 1.3 V 1, 2, 3 3V<= Vdf <= 35V, Iload = 10mA 3 -3.8 3.8 mV 1 3 -19.0 19.0 mV 2, 3 2, 7 -3.6 3.6 mV 1 2, 7 -12.0 12.0 mV 2, 3 -2.0 2.0 mV 1 -5.0 5.0 mV 2, 3 2, 4 -15.0 15.0 mV 1 2, 4 -50.0 50.0 mV 2, 3 5 -9.75 9.75 mV 1 100 uA 1, 2, 3 100 uA 1, 2, 3 5.0 mA 1, 2, 3 5.0 mA 1, 2, 3 10mA <= Il <=3A, Vout = Vref t = 20mS Quiesent Current Delta Adjustment Current SUBGROUPS 1, 2, 3 Vdf = 35V Delta Iadj UNIT V Vdf = 35V, Iout = 10mA Iq MAX 1.3 10mA <= Il <= 3A, Vout = 5.0V Thermal Regulation MIN 1.2 Vdf = 30V, 10mA <= Il <= 300mA tREG PINNAME 3V <= Vdf <= 35V Iout = 10mA -5.0 5.0 uA 1, 2, 3 10mA <= Il <= 3A -5.0 5.0 uA 1, 2, 3 Vdf = 30V, 10mA <= Il <= 300mA -5.0 5.0 uA 1, 2, 3 2 MICROCIRCUIT DATA SHEET MNLM150-X REV 0BL Electrical Characteristics DC/AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vdf = 5V, Vout = Vref, Iout = 1.5A. Pre Burn-In stress tests per RPI-5-024. SYMBOL PARAMETER Current Limit CONDITIONS NOTES PINNAME MIN A 1, 2, 3 Vdif = 30V 0.3 A 1, 2, 3 TA = +125 C, t = 1000 Hrs, Vdf = 3.0V, Il = 10mA Vdrop Voltage Dropout Vdf = 2.9V, Il = 3A -100 Rr Ripple Rejection f = 120 Hz, ei = 1Vrms, Cadj = 10uf, Vout = 10V 66 4: 5: 6: 7: SUBGROUPS 3.0 Long Term Stability Note Note Note Note UNIT Vdif = 10V Delta Vout/Delta t Note 1: Note 2: Note 3: MAX 1 1.0 %/Vou 2 t 100 mV 1, 2, 3 dB 4, 5, 6 Peridoic Group C testing. These Vout conditions are worst case. Limits = 0.01% of Vout at 25 C, 0.05% at -55 C, +125 C per volt of Vdf change at Vout = Vref. Limits = 0.3% of Vout at 25 C, 1.0% at -55 C, +125C at Vout = 5.0V. Limits =0.01% of Vout at 25C per Watt of power dissipation at Pd=7.5W. Represents worst case power dissipation of 30W. Limits are equivalent to 15mV at 25 C and 50mV at -55 C, +125 C at Vout = 5.0V. 3 MICROCIRCUIT DATA SHEET MNLM150-X REV 0BL Revision History Rev ECN # 0BL M0001687 11/18/98 Rel Date Originator Changes Barbara Lopez Changed: MNLM150-X Rev. 0AL to MNLM150-X Rev. 0BL. 4