MICROCIRCUIT DATA SHEET Original Creation Date: 07/06/95 Last Update Date: 04/08/02 Last Major Revision Date: 03/28/02 MJLM124A-X REV 2A1 QUAD OPERATIONAL AMPLIFER, SINGLE SUPPLY, LOW POWER General Description The LM124A consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM124A can be directly operated off of the standard +5 VDC power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional +15 VDC power supplies. Industry Part Number NS Part Numbers LM124A JL124ABCA JL124ABDA JL124ABZA JL124ASCA JL124ASDA JL124ASZA Prime Die LM124A Controlling Document 38510/11006,AMEND.2 CIR.F REV B Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 (Absolute Maximum Ratings) (Note 1) Power Dissipation CERDIP CERPACK CERAMIC SOIC Supply Voltage V+ Input Voltage Differential 400mW 350mW 350mW 36Vdc or +18Vdc 30Vdc Input Voltage -0.03Vdc to +32Vdc Input Current (Note 3) (vin < -0.3Vdc) Output Short-Circuit to GND (Note 4) (One Amplifier) V+ < 15Vdc and TA = 25 C Operating Temperature Range 10 to 0.1mA Continuous -55 C < Ta < +125 C Maximum Junction Temperature (Note 2) 175 C Storage Temperature Range -65 C < Ta < +150 C Lead Temperature (Soldering, 10 seconds) Thermal Resistance ThetaJA CERDIP (Still Air) (500LF/Min Air Flow) CERPACK (Still Air) (500LF/Min Air Flow) CERAMIC SOIC (Still Air) (500LF/Min Air Flow) 260 C 120 51 140 116 140 116 ThetaJC CERDIP CERPACK CERAMIC SOIC Package Weight CERDIP CERPACK CERAMIC SOIC ESD Tolerance (Note 5) C/W C/W C/W C/W C/W C/W 35 C/W 60 C/W 60 C/W TBD 460mg 410mg 250V Note 1: Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maxium allowable power dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number given in the Absolute Ma 2 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 (Continued) Note 3: Note 4: Note 5: This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the op amps to go to the V+ voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states will re-establish when the input voltage, which was negative, again returns to a value greater than -0.3 VDC (at 25 C). Short circuits from the output to V+ can cause excessive heating and eventual destruction. When considering short circuits to ground, the maximum output current is approximately 40 mA independent of the magnitude of V+. At values of supply voltage in excess of +15 VDC, continuous short-circuits can exceed the power dissipation ratings and cause eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers. Human body model, 1.5K Ohms in series with 100pF. 3 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Electrical Characteristics DC PARAMETERS SYMBOL Vio PARAMETER Input Offset Voltage CONDITIONS NOTES Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V Vcc+ = 2V, Vcc- = -28V, Vcm = 13V Vcc+ = 5V, Vcc- = Gnd, Vcm = -1.4V Vcc+ = 2.5V, Vcc- = -2.5, Vcm = 1.1V Iio Input Offset Current Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V Vcc+ = 2V, Vcc- = -28V, Vcm = 13V Vcc+ = 5V, Vcc- = Gnd, Vcm = -1.4V Vcc+ = 2.5V, Vcc- = -2.5, Vcm = 1.1V +Iib Input Bias Current Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V Vcc+ = 2V, Vcc- = -28V, Vcm = 13V Vcc+ = 5V, Vcc- = Gnd, Vcm = -1.4V Vcc+ = 2.5V, Vcc- = -2.5V, Vcm = 1.1V 4 PINNAME MIN MAX UNIT SUBGROUPS -2 2 mV 1 -4 4 mV 2, 3 -2 2 mV 1 -4 4 mV 2, 3 -2 2 mV 1 -4 4 mV 2, 3 -2 2 mV 1 -4 4 mV 2, 3 -10 10 nA 1, 2 -30 30 nA 3 -10 10 nA 1, 2 -30 30 nA 3 -10 10 nA 1, 2 -30 30 nA 3 -10 10 nA 1, 2 -30 30 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Electrical Characteristics DC PARAMETERS(Continued) SYMBOL -Iib PARAMETER Input Bias Current CONDITIONS NOTES Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V Vcc+ = 2V, Vcc- = -28V, Vcm = 13V Vcc+ = 5V, Vcc- = Gnd, Vcm = -1.4V Vcc+ = 2.5V, Vcc- = -2.5, Vcm = 1.1V +PSRR Power Supply Rejection Ratio CMRR Common Mode Rejection Ratio Ios+ Output Short Circiut Current Vcc+ = 30V, Vcc- = Gnd, Vo = 25V Icc Power Supply Current Vcc+ = 30V, Vcc- = Gnd Delta Vio/Delta T Delta Iio/Delta T Vcc- = Gnd, Vcm = -1.4V, 5V < Vcc < 30V PINNAME MIN MAX UNIT SUBGROUPS -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -50 +0.1 nA 1, 2 -100 +0.1 nA 3 -100 100 uV/V 1, 2, 3 76 dB 1, 2, 3 -70 mA 1, 2, 3 3 mA 1, 2 4 mA 3 Input Offset Voltage Temperature Sensitivity +25 C < TA < +125 C, +Vcc = 5V, -Vcc = 0V, Vcm = -1.4V 1 -30 30 uV/ C 2 -55 C < TA < +25 C, +Vcc = 5V, -Vcc = 0V, Vcm = -1.4V 1 -30 30 uV/ C 3 Input Offset Current Temperature Sensitivity +25 C < TA < +125 C, +Vcc = 5V, -Vcc = 0V, Vcm = -1.4V 1 -400 400 pA/ C 2 -55 C < TA < +25 C, +Vcc = 5V, -Vcc = 0V, Vcm = -1.4V 1 -700 700 pA/ C 3 Vcc+ = 30V, Vcc- = Gnd, Rl = 10K Ohms 35 mV 4, 5, 6 Vcc+ = 30V, Vcc- = Gnd, Iol = 5mA 1.5 V 4, 5, 6 Vcc+ = 4.5V, Vcc- = Gnd, Iol = 2uA 0.4 V 4, 5, 6 AC/DC PARAMETERS Vol Voh Logical "0" Output Voltage Logical "1" Output Voltage Vcc+ = 30V, Vcc- = Gnd, Ioh = -10mA 27 V 4, 5, 6 Vcc+ = 4.5V, Vcc- = Gnd, Ioh = -10mA 2.4 V 4, 5, 6 5 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Electrical Characteristics AC/DC PARAMETERS(Continued) SYMBOL Avs+ PARAMETER Voltage Gain CONDITIONS NOTES Vcc+ = 30V, Vcc- = Gnd, 1V < Vo < 26V, Rl = 10K Ohms +Vop Voltage Gain Maximum Output Voltage Swing MIN MAX UNIT SUBGROUPS 50 V/mV 4 25 V/mV 5, 6 50 V/mV 4 25 V/mV 5, 6 Vcc+ = 5V, Vcc- = Gnd, 1V < Vo < 2.5V, Rl = 10K Ohms 10 V/mV 4, 5, 6 Vcc+ = 5V, Vcc- = Gnd, 1V < Vo < 2.5V, Rl = 2K Ohms 10 V/mV 4, 5, 6 Vcc+ = 30V, Vcc- = Gnd, Vo = +30V, Rl = 10K Ohms 27 V 4, 5, 6 Vcc+ = 30V, Vcc- = Gnd, Vo = +30V, Rl = 2K Ohms 26 V 4, 5, 6 Vcc+ = 30V, Vcc- = Gnd, 5V < Vo < 20V, Rl = 2K Ohms Avs PINNAME TR(tr) Transient Response: Rise Time Vcc+ = 30V, Vcc- = Gnd 1 uS 7, 8A, 8B TR(os) Transient Response: Overshoot Vcc+ = 30V, Vcc- = Gnd 50 % 7, 8A, 8B Sr+ Slew Rate: Rise VCC+ = 30V, VCC- = GND 0.1 V/uS 7, 8A, 8B Sr- Slew Rate: Fall Vcc+ = 30V, Vcc- = Gnd 0.1 V/uS 7, 8A, 8B Vio(a) Temperature Coefficient Screen 2 2.3 mV Vio(b) Temperature Coefficient Screen 2 2.5 mV Iio(a) Temperature Coefficient Screen 2 20 nA Iio(b) Temperature Coefficient Screen 2 16 nA +Iib(a) Temperature Coefficient Screen 2 16 nA +Iib(b) Temperature Coefficient Screen 2 10 nA +Iib(c) Temperature Coefficient Screen 2 13 nA 6 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Electrical Characteristics AC/DC PARAMETERS(Continued) SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT -Iib(a) Temperature Coefficient Screen 2 16 nA -Iib(b) Temperature Coefficient Screen 2 10 nA -Iib(c) Temperature Coefficient Screen 2 13 nA PSRR Temperature Coefficient Screen 2 17 uV SUBGROUPS AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: +Vcc = 30V, -Vcc = 0V NI(BB) Noise Broadband +Vcc = 15V, -Vcc = -15V, BW = 10Hz to 5KHz NI(PC) Noise Popcorn +Vcc = 15V, -Vcc = -15V,Rs = 20K Ohms, BW = 10Hz to 5KHz Cs Channel Separation +Vcc = 30V, -Vcc = Gnd, Rl = 2K Ohms 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, A to B 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, A to C 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, A to D 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, B to A 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, B to C 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, B to D 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, C to A 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, C to B 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, C to D 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, D to A 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, D to B 80 dB 7 Rl = 2K Ohms, Vin = 1V and 16V, D to C 80 dB 7 7 3 15 uV/rm 7 50 s uV/pK 7 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Electrical Characteristics DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: "Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 only". SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS Vio Input Offset Voltage Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V -0.5 0.5 mV 1 +Iib Input Bias Current Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V -10 10 nA 1 -Iib Input Bias Current Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V -10 10 nA 1 Note 1: Note 2: Note 3: Calculated parameters. Temp. Co. DLOG readings will print and MNET transfer will occur only in Test Mode 2 = 1. Bin 5 is a potential Temp. Co. Failure. Test on A360/J273 or bench test. 8 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Graphics and Diagrams GRAPHICS# DESCRIPTION 05275HRA4 CERPACK (W), 14 LEAD (B/I CKT) 09173HRA2 CERDIP (J), 14 LEAD (B/I CKT) J14ARH CERDIP (J), 14 LEAD (P/P DWG) P000254B CERAMIC SOIC (WG), 14 LEAD (PINOUT) P000288A CERDIP (J), 14 LEAD (PINOUT) P000474A CERPACK (W), 14 LEAD (PIN OUT) W14BRN CERPACK (W), 14 LEAD (P/P DWG) WG14ARC CERAMIC SOIC (WG), 14LD (P/P DWG) See attached graphics following this page. 9 OUTPUT 1 1 14 OUTPUT 4 IN- 1 2 13 IN- 4 IN+ 1 3 12 IN+ 4 V+ 4 11 GND IN+ 2 5 10 IN+ 3 IN- 2 6 9 IN- 3 OUTPUT 2 7 8 OUTPUT 3 LM124AWG, LM124WG 14 - LEAD CERAMIC SOIC CONNECTION DIAGRAM TOP VIEW P000254B N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 OUTPUT 1 1 14 OUTPUT 4 IN- 1 2 13 IN- 4 IN+ 1 3 12 IN+ 4 V+ 4 11 GND IN+ 2 5 10 IN+ 3 IN- 2 6 9 IN- 3 OUTPUT 2 7 8 OUTPUT 3 LM124AJ, LM124J 14 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000288A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 OUTPUT 1 1 14 OUTPUT 4 IN- 1 2 13 IN- 4 IN+ 1 3 12 IN+ 4 V+ 4 11 GND IN+ 2 5 10 IN+ 3 IN- 2 6 9 IN- 3 OUTPUT 2 7 8 OUTPUT 3 LM124AW, LM124W 14 - LEAD CERAMIC CERPACK CONNECTION DIAGRAM TOP VIEW P000474A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 MICROCIRCUIT DATA SHEET MJLM124A-X REV 2A1 Revision History Rev ECN # Originator Changes 1A0 M0003655 03/28/02 Rel Date Rose Malone Update MDS - MJLM124A-X, Rev. 0CL to Fully Released MDS, MJLM124A-X, Rev. 1A0. Parameters Delta Vio/Delta T and Delta Iio/Delta T changed from +25 C < TA < +125 C and -55 C < TA < +25 C. Is Now, +25 C < TA < +125 C, +Vcc = 5V, -Vcc = 0V, Vcm = -1.4V and -55 C < TA < +25 C, +Vcc = 5V, -Vcc = 0V, Vcm = -1.4V. To clarify the Tempco test Conditions. 1B1 M0003980 04/08/02 Rose Malone Update MDS: MJLM124A-X, Rev. 1A0 to JMLM124A-X, Rev. 1B1. Added WG pkg to Main Table, Absolute Maximum Ratings Section and Graphics Section. 2A1 M0004001 04/08/02 Rose Malone Update MDS: MJLM124A-X, Rev. 1B1 to MJLM124A-X, Rev. 2A1. Added limit 116 C/W for CERAMIC SOIC (500LF/Min Air Flow) in Absolute Maximum Ratings Section. 10