MICROCIRCUIT DATA SHEET Original Creation Date: 05/10/95 Last Update Date: 02/17/97 Last Major Revision Date: 05/10/95 MJLM140-12-H REV 0B0 VOLTAGE REGULATOR, +12 VOLTS AT 0.5A General Description The LM140 monolithic 3-terminal positive voltage regulators employ internal current limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. Industry Part Number NS Part Numbers LM140 JL140-12BXA JL140-12SXA Prime Die LM141 Controlling Document 38510/10703 REV C Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MJLM140-12-H REV 0B0 Features - Output current in excess of 0.5A No external components Internal thermal overload protection Internal short circuit current-limiting Output transistor safe-area compensation 2 MICROCIRCUIT DATA SHEET MJLM140-12-H REV 0B0 (Absolute Maximum Ratings) (Note 1) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature 150 C Storage Temperature Range -65 C to +150 C Lead Temperature Soldering, (10 seconds) Thermal Resistance ThetaJA (Still Air) (500 LF/Min Air Flow) 300 C 232 C/W 77 C/W ThetaJC ESD Susceptibility (Note 3) 15 C/W 2KV Note 1: Note 2: Note 3: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. Human body model, 100pF discharged through 1.5K Ohms Recommended Operating Conditions (Note 1) Temperature Range (TA) (Note 2) -55 C to +125 C Note 1: Note 2: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. 3 MICROCIRCUIT DATA SHEET MJLM140-12-H REV 0B0 Electrical Characteristics DC PARAMETERS SYMBOL Vout (1) VRLINE VRLOAD ISCD PARAMETER Output Voltage Line Regulation Load Regulation Stand by Current Drain CONDITIONS NOTES PINNAME UNIT SUBGROUPS MIN MAX Vin = 15V, Il = -5mA 11.4 12.6 V 1, 2, 3 Vin = 15V, Il = -0.5A 11.4 12.6 V 1, 2, 3 Vin = 27V, Il = -5mA 11.4 12.6 V 1, 2, 3 Vin = 27V, Il = -0.5A 11.4 12.6 V 1, 2, 3 Vin = 35V, Il = -5mA 11.4 12.6 V 1, 2, 3 Vin = 35V, Il = -50mA 11.4 12.6 V 1, 2, 3 15V < Vin < 35V, Il = -50mA -360 360 mV 1, 2, 3 15V < Vin < 32V, Il = -350mA -120 120 mV 1, 2, 3 Vin = 17V, -500mA < Il < -5mA -240 240 mV 1, 2, 3 Vin = 35V, -50mA < Il < -5mA -360 360 mV 1, 2, 3 Vin = 17V, Il = -5mA -7 -0.5 mA 1, 2, 3 Vin = 35V, Il = -5mA -8 -0.5 mA 1, 2, 3 Delta ISCD (LINE) Stand by Current Drain vs. Line Voltage 15V < Vin < 35V, Il = -5mA -1 1 mA 1, 2, 3 Delta ISCD (LOAD) Stand by Current Drain vs. Load Current Vin = 17V, -500mA < Il < -5mA -.5 0.5 mA 1, 2, 3 Iol Peak Output Current Vin = 15V, Delta/Vout = -1.13V -2 -0.5 A 1, 2, 3 Ios Output Short Circuit Current Vin = 17V -1.75 -0.01 A 1, 2, 3 Vin = 32V -1.25 -0.01 A 1, 2, 3 Vin = 35V -1.00 -0.01 A 1, 2, 3 Vout (2) Output Voltage Vin = 17V, Il = -5mA 1 11.28 12.72 V 2 Vout (3) Output Voltage Vin = 17V, Il = -5mA 2 11.4 12.6 V 7, 8A, 8B 4 MICROCIRCUIT DATA SHEET MJLM140-12-H REV 0B0 Electrical Characteristics DC PARAMETERS(Continued) SYMBOL PARAMETER Delta Vout/ Delta T Average Temperature Coefficient Output Voltage CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS 25 C < TA < +125 C, Vin = 17V, Il = -5mA 3 -3 3 mV/C 8A -55 C < TA < 25 C, Vin = 17V, Il = -5mA 3 -3 3 mV/C 8B AC PARAMETERS NO Output Noise Voltage Vin = 17V, Il = -50mA 250 uVrms 7 Delta Vout/ Delta Il Transient Load Response Vin = 17V, Il = -50mA, Delta Il = -200mA 2.5 mV/mA 7 Delta Vout/Delta Vin Transient Line Response Vin = 17V, VPulse = 3V, Il = -5mA 30 mV/V 7 Delta Vin/Delta Vout Ripple Rejection Vin = 17V, ei = 1Vrms at f = 2400Hz, Il = -125mA 55 dB 4 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: "Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 only". Vout ISCD Output Voltage Stand by Current Drain Note 1: Note 2: Note 3: Vin = 15V, Il = -5mA -0.06 0.06 V 1 Vin = 15V, Il = -0.5A -0.06 0.06 V 1 Vin = 27V, Il = -5mA -0.06 0.06 V 1 Vin = 27V, Il = -0.5A -0.06 0.06 V 1 Vin = 35V, Il = -5mA -0.06 0.06 V 1 Vin = 35V, Il = -50mA -0.06 0.06 V 1 Vin = 17V, Il = -5mA -20 20 % 1 Tested at TA = 125 C, correlated to TA = 150 C. Tested at extremes as a set up for Delta Vout/Delta T tests. Calculated parameter. For calculations use Vout test at Vin = 17V, Il = -5mA (NOTE 2) 5 MICROCIRCUIT DATA SHEET MJLM140-12-H REV 0B0 Graphics and Diagrams GRAPHICS# H03ARC DESCRIPTION (blank) See attached graphics following this page. 6