TS922 RAIL TO RAIL HIGH OUTPUT CURRENT DUAL OPERATIONAL AMPLIFIER .. .. .. . .. . RAIL TO RAIL INPUT AND OUTPUT LOW NOISE : 9nV/√ √ (Hz) ) LOW DISTORTION HIGH OUTPUT CURRENT : 80mA (able to drive 32Ω loads) HIGH SPEED : 4MHz, 1.3V/µs OPERATING FROM 2.7V to 12V LOW INPUT OFFSET VOLTAGE : 900µV max (TS922A) ESD INTERNAL PROTECTION : 2KV LATCH-UP IMMUNITY N DIP8 (Plastic Package) MACROMODEL INCLUDED IN THIS SPECIFICATION D SO8 (Plastic Micropackage) P TSSOP8 (Thin Shrink Small Outline Package) ORDER CODES Part Number Temperature Range -40, +125oC TS922I DESCRIPTION The TS922 is a RAIL TO RAIL dual BiCMOS operational amplifier optimized and fully specified for 3V and 5V operations. It exhibits a very low noise, low distortion and high output current capability making this device an excellent choice for high quality, low voltage or battery operated audio systems. The TS922 remains stable when charging the output with capacitive loads up to 500pF. .. .. .. . APPLICATIONS headphoneamplifier piezoelectric speaker sound cards, multimedia systems line driver, actuator driver servo amplifier mobile phone and portable equipment instrumentation with low noise as key factor June 1998 Package N D P • • • PIN CONNECTIONS (top view) 8 VCC Output 1 1 Inverting Input 1 2 - Non-inverting Input 1 3 + VCC 4 + 7 Output 2 - 6 Inverting Input 2 + 5 Non-inverting Input 2 1/11 TS922 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit VCC Supply Voltage - (note 1) 14 V Vid Differential Input Voltage - (note 2) ±1 V Vi Input Voltage - (note 3) -0.3 to 14 V Toper Operating Free Air Temperature Range -40 to +125 o Tstg Storage Temperature -65 to +150 o 150 o see note 4 o Maximum Junction Temperature Tj Output Short Circuit Duration Notes : 1. 2. 3. 4. C C C C All voltage values, except differential voltage are with respect to network ground terminal. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. The magnitude of input and output voltages must never exceed VCC+ +0.3V. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuit on all amplifiers. OPERATING CONDITIONS Symbol 2/11 Parameter VCC Supply Voltage Vicm Common Mode Input Voltage Range Value Unit 2.7 to 12 V VCC- -0.2 to VCC++0.2 V TS922 ELECTRICAL CHARACTERISTICS VCC+ = 3V, Tamb = 25oC (unless otherwise specified) Symbol Vio Parameter Input Offset Voltage Tmin. ≤ Tamb ≤ Tmax. VOH Input Offset Voltage Drift Input Offset Current Vout = 1.5V Input Bias Current Vout = 1.5V High Level Output Voltage VOL Low Level Output Voltage Avd Large Signal Voltage Gain (Vout = 2Vpk-pk) ICC Total Supply Current no load, Vout = VCC/2 Gain Bandwidth Product RL = 600Ω Common Mode Rejection Ratio Supply Voltage Rejection Ratio VCC = 2.7 to 3.3V Output Short Circuit Current Slew Rate Phase Margin at Unity Gain RL = 600Ω,CL = 100pF Gain Margin RL = 600Ω,CL = 100pF DVio Iio Iib GBP CMR SVR Io SR ∅m Gm en THD Cs Min. Typ. TS922 TS922A TS922 TS922A Max. 3 0.9 5 1.8 Unit mV o µV/ C nA 2 1 30 15 100 nA RL = 10k R L = 600Ω R L = 32Ω R L = 10k R L = 600Ω R L = 32Ω R L = 10k R L = 600Ω R L = 32Ω Equivalent Input Noise Voltage f = 1kHz Total Harmonic Distortion Vout = 2Vpk-pk, F = 1kHz, AV = 1, RL = 600Ω Channel Separation 2.90 2.87 V 2.63 50 100 180 200 35 16 mV V/mV mA 2 3 MHz 60 4 80 60 50 0.7 85 80 1.3 dB dB mA V/µs Degrees 68 dB 12 9 0.005 120 nV √ Hz % dB 3/11 TS922 ELECTRICAL CHARACTERISTICS VCC+ = 5V, Tamb = 25oC (unless otherwise specified) Symbol Vio Parameter Input Offset Voltage Tmin. ≤ Tamb ≤ Tmax. VOH Input Offset Voltage Drift Input Offset Current Vout = 1.5V Input Bias Current Vout = 1.5V High Level Output Voltage VOL Low Level Output Voltage Avd Large Signal Voltage Gain (Vout = 2Vpk-pk) ICC Total Supply Current no load, Vout = VCC/2 Gain Bandwidth Product R L = 600Ω Common Mode Rejection Ratio Supply Voltage Rejection Ratio VCC = 3V to 5V Output Short Circuit Current Slew Rate Phase Margin at Unity Gain R L = 600Ω,CL = 100pF Gain Margin R L = 600Ω,CL = 100pF DVio Iio Iib GBP CMR SVR Io SR ∅m Gm en THD Cs 4/11 Min. Typ. TS922 TS922A TS922 TS922A Max. 3 0.9 5 1.8 Unit mV o µV/ C nA 2 1 30 15 100 nA RL = 10k RL = 600Ω RL = 32Ω RL = 10k RL = 600Ω RL = 32Ω RL = 10k RL = 600Ω RL = 32Ω Equivalent Input Noise Voltage f = 1kHz Total Harmonic Distortion Vout = 2Vpk-pk, F = 1kHz, AV = 1, R L = 600Ω Channel Separation 4.90 4.85 V 4.4 50 120 300 200 35 16 mV V/mV mA 2 3 MHz 60 4 80 60 50 0.7 85 80 1.3 dB dB mA V/µs Degrees 68 dB 12 9 0.005 120 nV √ Hz % dB TS922 .. . MACROMODEL RAIL TO RAIL INPUT AND OUTPUT LOW NOISE : 9nV√ √Hz LOW DISTORTION ** Standard Linear Ics Macromodels, 1996. ** CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIVE POWER SUPPLY * 5 NEGATIVE POWER SUPPLY . S UBCK T T S9 2 2 1 3 2 4 5 (a n alo g ) ********************************************************* .MODEL MDTH D IS=1E-8 KF=2.664234E-16 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 5 2 5 1 EIN 16 5 1 5 1 RIP 10 11 8.125000E+00 RIN 15 16 8.125000E+00 RIS 11 15 2.238465E+02 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 153.5u VOFN 13 14 DC 0 IPOL 13 5 3.200000E-05 CPS 11 15 1e-9 DINN 17 13 MDTH 400E-12 VIN 17 5 -0.100000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 0.400000E+00 FCP 4 5 VOFP 1.865000E+02 FCN 5 4 VOFN 1.865000E+02 FIBP 2 5 VOFP 6.250000E-03 FIBN 5 1 VOFN 6.250000E-03 * GM1 STAGE *************** FGM1P 119 5 VOFP 1.1 FGM1N 119 5 VOFN 1.1 RAP 119 4 2.6E+06 RAN 119 5 2.6E+06 * GM2 STAGE *************** G2P 19 5 119 5 1.92E-02 G2N 19 5 119 4 1.92E-02 . .. HIGH OUTPUT CURRENT : 80mA (able to drive 32Ω loads) HIGH SPEED : 4MHz, 1.3V/µs OPERATING FROM 2.7V TO 12V R2P 19 4 1E+07 R2N 19 5 1E+07 ************************** VINT1 500 0 5 GCONVP 500 501 119 4 19.38 !envoie ds VP, I(VP)=(V119-V4)/2/Ut VP 501 0 0 GCONVN 500 502 119 5 19.38 !envoie ds VN, I(VN)=(V119-V5)/2/Ut VN 502 0 0 ********* orientation isink isource ******* VINT2 503 0 5 FCOPY 503 504 VOUT 1 DCOPYP 504 505 MDTH 400E-9 VCOPYP 505 0 0 DCOPYN 506 504 MDTH 400E-9 VCOPYN 0 506 0 *************************** F2PP 19 5 poly(2) VCOPYP VP 0 0 0 0 0.5 !multiplie I(vout)*I(VP)=Iout*(V119-V4)/2/Ut F2PN 19 5 poly(2) VCOPYP VN 0 0 0 0 0.5 !multiplie I(vout)*I(VN)=Iout*(V119-V5)/2/Ut F2NP 19 5 poly(2) VCOPYN VP 0 0 0 0 1.75 !multiplie I(vout)*I(VP)=Iout*(V119-V4)/2/Ut F2NN 19 5 poly(2) VCOPYN VN 0 0 0 0 1.75 !multiplie I(vout)*I(VN)=Iout*(V119-V5)/2/Ut * COMPENSATION ************ CC 19 119 25p * OUTPUT*********** DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 6.250000E+02 VIPM 28 4 5.000000E+01 HONM 21 27 VOUT 6.250000E+02 VINM 5 27 5.000000E+01 VOUT 3 23 0 ROUT 23 19 6 COUT 3 5 1.300000E-10 DOP 19 25 MDTH 400E-12 VOP 4 25 1.052 DON 24 19 MDTH 400E-12 VON 24 5 1.052 .ENDS 5/11 TS922 ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, RL,CL connected to VCC/2, Tamb = 25oC (unless otherwise specified) Symbol Conditions Vio Avd RL = 10kΩ ICC No load, per operator Vicm 6/11 Value Unit 0 mV 200 V/mV 1.2 mA -0.2 to 3.2 V VOH RL = 10kΩ 2.95 V VOL RL = 10kΩ 25 mV Isink VO = 3V 80 mA Isource VO = 0V 80 mA GBP RL = 600Ω 4 MHz SR RL = 10kΩ, CL = 100pF 1.3 V/µs ∅m RL = 600Ω 68 Degrees TS922 OUTPUT SHORT CIRCUIT CURRENT vs OUTPUT VOLTAGE OUTPUT SHORT CIRCUIT CURRENT vs OUTPUT VOLTAGE 100 80 100 80 Sink 40 Output Short-Circuit Current (mA) Output Short-Circuit Current (mA) 60 20 Vcc=0/5V 0 -20 -40 -60 Source -80 60 Sink 40 20 Vcc=0/3V 0 -20 -40 -60 Source -80 -100 -100 0 -120 0 1 2 3 Output Voltage (V) 4 0,5 1 5 TOTAL SUPPLY CURRENT vs SUPPLY VOLTAGE 1,5 Output Voltage ( V) 2 2,5 3 OPEN LOOP GAIN AND PHASEvs FREQUENCY 60 180 3 phase 120 20 60 0 0 Phase (Deg) Rl=10k Cl=100pF gain Gain (dB) Supply Current (mA) 40 2 1 0 0 2 4 6 8 Supply Voltage (V) 10 12 -20 1 E+02 OPEN LOOP GAIN AND PHASE vs FREQUENCY 1E+03 1 E+04 1E+05 Fr e que ncy (Hz) 1E+06 1 E+07 -60 1E+08 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 0 30 2V S11 (dB) -10 Equivalent Input Noise (nV/sqrt(Hz)) -5 3V -15 4V -20 -25 100 Vcc=Vbias @ Ta=+25°C L2=56nH (450MHz operation) 200 300 400 500 600 Freq (MHz) 25 20 15 10 5 0 0,01 700 800 900 Vcc=±1.5V Rs=100ohms 0,1 1 Freq uen cy (kHz) 10 100 1000 7/11 TS922 THD + NOISE vs FREQUENCY THD + NOISE vs FREQUENCY 0,04 0,02 0,032 RL=32ohms Vo=4Vpp Vcc= ±2.5V Av=1 RL=2k Vo=10Vpp Vcc=±6V Av=1 THD+Noise (%) THD+Noise (%) 0,015 0,01 0,024 0,016 0,005 0,008 0 0,01 0,1 1 Frequency (kHz) 10 0 0,01 100 THD + NOISE vs FREQUENCY 0,1 1 Fre quency (kHz) 10 100 THD + NOISE vs OUTPUT VOLTAGE 0,7 10,000 0,6 RL=32ohms Vo=2Vpp Vcc=±1.5V Av=10 1,000 THD+Noise (%) THD+Noise (%) 0,5 0,4 0,3 Rl=60 0ohms f=1kHz Vcc= 0/3V Av=- 1 0,100 0,2 0,010 0,1 0 0,01 0,1 1 Frequency (kHz) 10 0,001 100 THD + NOISE vs OUTPUT VOLTAGE 0 0,2 0,4 0,6 Vout (V rms) 0,8 1 1,2 1 1,2 THD + NOISE vs OUTPUT VOLTAGE 10 10 1 RL=2kohms RL=32ohms F=1kHz Vcc=±1.5V Av= -1 THD+Noise (%) THD+Noise (%) 1 Vcc=±1.5V f=1kHz Av= -1 0,1 0,01 0,1 0,001 0,01 0 0,2 0 ,4 0 ,6 Vou t (Vrms) 8/11 0 ,8 1 0,0001 0 0,2 0,4 0,6 Vout (Vrms) 0,8 TS922 PM-DIP8.EPS PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIP A a1 B b b1 D E e e3 e4 F i L Z Min. Millimeters Typ. 3.32 0.51 1.15 0.356 0.204 Max. 1.65 0.55 0.304 10.92 9.75 7.95 Min. 0.020 0.045 0.014 0.008 Max. 0.065 0.022 0.012 0.430 0.384 0.313 2.54 7.62 7.62 3.18 Inches Typ. 0.131 0.100 0.300 0.300 6.6 5.08 3.81 1.52 0.125 0260 0.200 0.150 0.060 DIP8.TBL Dimensions 9/11 TS922 PM-SO8.EPS PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) A a1 a2 a3 b b1 C c1 D E e e3 F L M S 10/11 Min. Millimeters Typ. 0.1 0.65 0.35 0.19 0.25 Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 Min. Inches Typ. 0.026 0.014 0.007 0.010 Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.189 0.228 0.197 0.244 0.004 o 45 (typ.) 4.8 5.8 5.0 6.2 1.27 3.81 3.8 0.4 0.050 0.150 4.0 1.27 0.6 0.150 0.016 o 8 (max.) 0.157 0.050 0.024 S08.TBL Dimensions TS922 PACKAGE MECHANICAL DATA 8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE Dim. Millimeters Min. Typ. A Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b 0.19 c 0.09 D 2.90 E E1 Inches 0.15 1.00 3.00 0.05 0.01 1.05 0.031 0.30 0.007 0.20 0.003 3.10 0.114 6.40 4.30 e 4.40 o 0 l 0.50 4.50 0.039 0.041 0.15 0.012 0.118 0.122 0.169 0.173 0.177 0.025 o 0.60 0.006 0.252 0.65 k Max. o 8 0 0.75 0.09 o 8 0.0236 0.030 ORDER CODE : Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publ ication supersedes and replaces all infor mation previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics 1998 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 11/11