Ordering number : ENN7540 15GN01M NPN Epitaxial Planar Silicon Transistor 15GN01M VHF to UHF Band High-frequency Switching, Highfrequency General-Purpose Amplifier Applications Features • • Package Dimensions Small ON-resistance [Ron=2Ω (IB=3mA)]. Small output capacitance [Cob=1.1pF (VCB=10V)]. unit : mm 2059B 0.3 0.2 0.425 [15GN01M] 0.15 3 0.425 2.1 1.250 0 to 0.1 1 2 0.65 0.65 2.0 0.3 0.6 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : MCP Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 15 Collector-to-Emitter Voltage VCEO 8 V Emitter-to-Base Voltage VEBO 3 V Collector Current Junction Temperature IC PC Tj Storage Temperature Tstg Collector Dissipation V 50 mA 400 mW 150 °C --55 to +150 °C Mounted on a ceramic board(250mm2✕0.8mm) Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ VCB=10V, IE=0 VEB=2V, IC=0 µA 0.5 µA Gain-Bandwidth Product VCE=5V, IC=10mA VCE=5V, IC=10mA Output Capacitance Cob 1.1 1.5 VCE(sat) VCB=10V, f=1MHz IC=20mA, IB=2mA 0.06 0.12 Ron IB=3mA, f=10kHz 2.0 Output ON resistance 1.0 Unit 0.5 hFE fT Collector-to-Emitter Saturation Voltage 200 max 400 1.5 GHz pF V Ω Marking : ZA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71003 TS IM TA-100386 No.7540-1/4 15GN01M IC -- VCE mA 0.30 Collector Current, IC -- mA 45 IC -- VCE 10 0.25mA 40 0.20mA 35 30 0.15mA 25 0.10mA 20 15 0.05mA 10 Collector Current, IC -- mA 50 45µA 9 40µA 8 35µA 7 30µA 6 25µA 5 20µA 4 15µA 3 10µA 2 5µA 1 5 IB=0 0 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 Collector-to-Emitter Voltage, VCE -- V 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 IT06247 hFE -- IC 7 VCE=5V VCE=5V 50 5 DC Current Gain, hFE Collector Current, IC -- mA 4.5 Collector-to-Emitter Voltage, VCE -- V IT06246 IC -- VBE 60 IB=0 0 0.50 40 30 20 3 2 10 0 100 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 2 1.2 5 7 1.0 2 3 5 7 10 2 3 f=1MHz Output Capacitance, Cob -- pF Gain-Bandwidth Product, f T -- GHz VCE=5V 2 1.0 7 5 3 1.0 2 3 5 7 10 2 3 5 Collector Current, IC -- mA 3 2 1.0 7 5 0.1 7 100 IT05402 2 3 5 7 2 1.0 3 5 Collector-to-Base Voltage, VCB -- V Cre -- VCB 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Reverse Transfer Capacitance, Cre -- pF 1.0 7 5 0.1 10 IC / IB=10 f=1MHz 2 7 IT05404 VCE(sat) -- IC 2 3 7 100 IT05405 Cob -- VCB 5 3 5 Collector Current, IC -- mA f T -- IC 5 3 IT06248 0.1 7 5 3 2 0.01 2 3 5 7 1.0 2 3 Collector-to-Base Voltage, VCB -- V 5 7 10 IT06250 3 5 7 1.0 2 3 5 7 10 Collector Current, IC -- mA 2 3 5 7 IT06249 No.7540-2/4 15GN01M Ron -- IB 10 PC -- Ta 450 f=10KHz 1kΩ 400 IN OUT 8 Collector Dissipation, PC -- mW Output ON resistance, Ron -- Ω 9 10kΩ 7 IB 6 5 4 3 ou nt ed 300 on ac er 250 am ic bo ar 200 d( 25 0m 150 m2 ✕ 0. 100 8m m ) 50 2 1 0.1 M 350 0 2 3 5 7 1.0 Base Current, IB -- mA 2 3 5 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C IT05403 140 160 IT06251 S Parameters (Common emitter) VCE=5V, IC=5mA, ZO=50Ω Freq(MHz) S11 ∠S11 S21 ∠S21 S12 ∠S12 S22 ∠S22 100 0.662 --25.65 4.631 122.00 0.028 71.36 0.765 --10.50 200 0.582 --36.72 3.028 112.20 0.051 68.80 0.732 --14.15 300 0.529 --47.21 2.353 104.69 0.071 65.59 0.713 --17.91 400 0.487 --56.61 1.955 97.68 0.088 63.00 0.700 --21.58 500 0.459 --65.82 1.691 91.07 0.103 60.43 0.689 --25.23 600 0.429 --74.14 1.496 85.11 0.116 57.83 0.679 --28.81 700 0.409 --82.44 1.353 79.01 0.128 56.22 0.674 --32.38 800 0.388 --89.94 1.239 73.29 0.138 54.76 0.671 --35.89 900 0.374 --96.79 1.149 67.98 0.148 53.44 0.671 --39.34 1000 0.365 --103.28 1.072 63.13 0.156 52.60 0.670 --42.75 VCE=5V, IC=10mA, ZO=50Ω Freq(MHz) S11 ∠S11 S21 ∠S21 S12 ∠S12 S22 ∠S22 100 0.587 --31.65 6.647 118.78 0.026 71.86 0.694 --11.96 200 0.502 --46.40 4.239 108.57 0.046 68.22 0.653 --15.76 300 0.444 --59.47 3.227 100.32 0.064 65.90 0.630 --19.10 400 0.405 --70.80 2.616 93.18 0.079 63.91 0.619 --22.50 500 0.381 --81.80 2.217 86.64 0.093 62.30 0.607 --25.83 600 0.356 --91.29 1.922 80.82 0.105 60.39 0.598 --29.19 700 0.342 --101.15 1.715 74.86 0.115 59.29 0.596 --32.72 800 0.329 --109.42 1.544 69.40 0.125 58.34 0.593 --36.10 900 0.319 --116.99 1.414 64.16 0.135 57.86 0.594 --39.48 1000 0.315 --124.06 1.305 59.41 0.144 57.47 0.593 --42.80 VCE=5V, IC=20mA, ZO=50Ω Freq(MHz) S11 ∠S11 S21 ∠S21 S12 ∠S12 S22 ∠S22 100 0.505 --41.07 8.945 114.82 0.023 71.42 0.611 --13.64 200 0.417 --60.49 5.500 103.75 0.042 69.03 0.568 --16.14 300 0.369 --76.83 4.039 95.20 0.056 67.39 0.548 --18.89 400 0.341 --90.31 3.197 88.11 0.070 66.22 0.539 --21.75 500 0.328 --102.08 2.654 81.71 0.082 65.43 0.533 --24.77 600 0.316 --112.57 2.264 76.38 0.094 64.49 0.528 --27.99 700 0.311 --122.49 1.988 70.80 0.104 64.03 0.530 --31.32 800 0.306 --130.50 1.771 65.75 0.115 63.95 0.530 --34.57 900 0.304 --137.80 1.605 60.92 0.125 64.09 0.534 --37.93 1000 0.306 --144.30 1.470 56.51 0.135 64.16 0.537 --41.24 No.7540-3/4 15GN01M Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2003. Specifications and information herein are subject to change without notice. PS No.7540-4/4