C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
Features/Benefits
Long travel and latching options
Models Available
Available with illuminated LED
Long life contact design
Typical Applications
Instrumentation
Computers and peripherals
Telecommunications and networking equipment
Pushbutton
B
Build-A-Switch
Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete
listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box.
Switches with standard options are shown on pages B-47 and B-48. Available options are shown and described on pages B-48
thru B-55. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal
and are compatible with all “bottom-wash” PCB cleaning methods.
Typical Example:
8
1 6
1
S
H
Z
Switch Function
8161 +
8168 + 8261 + Actuator or Plunger
S
J80
J81
J82
J86
J96
L
L1
S1
S2
ITT Industries
&# (% !
(*4$(
(*4$( 1$.# !,'
(*4$( 1$.# !,' (*4$( 1$.# !,' 1$.# 4,% . &/(" , 1$.# *
&/(" , 1$.# *
&/(" , 1$.# *
&/(" , 1$.# *
Bushing
H % % #"&
H9 % % #"&
NONE ) /-#$(" #)$ , +/$, Y3 '' % 313
Terminations
A
% %#&+ AV2 #% #% %#&+ C
#&+ Z
# &
A3 $"#. ("& -(*4$( .#,/4#)&
AV3 ,.$& ,$"#. ("& -(*4$(
.#,/4#)&
AW $"#. ("& 2. ( .#,/4#)&
V2 #$"# 4,% .
V3 #$"# 4,% .
V4 #$"# 4,% .
V6 #$"# 4,% .
V7 #$"# 4,% .
V8 #$"# 4,% .
V9 #$"# 4,% .
V21 #$"# -(*4$( 4,% .
V31 #$"# -(*4$( 4,% .
V61 #$"# -(*4$( 4,% .
W
&)(" 1$, 1,*
W3 &)(" 1$, 1,*
Z3
/$% )(( .
Q
E
2
Contact Material
B Q '# $'#
G )& )0 , -$&0 ,
K $&0 ,
L )& )0 , -$&0 ,
M )& )0 , -$&0 ,
Seal
E ! )*
I *)23 *).. Cap Color
2 1 #$.
3 Frame Color
2 1 #$.
3 LED Color
3 NONE ) &- 1$.#)/. 5 &&)1
6 , (
Cannon
B-46
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
Materials
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC
or 28 V DC; 3 AMPS @ 250 V AC. See page B-55 for
additional ratings.
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 milliohms typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 ohms min.
DIELECTRIC STRENGTH: 1,000 V RMS min. @ sea level.
OPERATING TEMPERATURE: –30C to 65C
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
CAP & FRAME: Nylon, black standard.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: Q contact material: Coin silver, silver plated.
See page B-55 for additional contact materials.
CENTER CONTACT & ALL TERMINALS: Q contact material: Copper
alloy, silver plated. See page B-55 for additional contact materials.
TERMINAL SEAL: Epoxy
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
SWITCHES WITH STANDARD OPTIONS
ÑÑÑ
ÑÑÑ
POS. 1
PART NUMBER
FUNCTION
8161SHZQE2
8168SHZQE2
SPDT
POS. 2
ON
ON
ON
MOM.
MOM. = Momentary
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page B-51.
For PC mounting information, see page B-51.
8161SHZQE2
SPDT
U.S. Patent No. 4,095,070
PART NUMBER
FUNCTION
8261SHZQE2
DPDT
ÑÑÑ
ÑÑÑ
POS. 1
POS. 2
ON
ON
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page B-51.
For PC mounting information, see page B-51.
8261SHZQE2
DPDT
U.S. Patent No. 4,095,070
POS. 1
PART NUMBER
FUNCTION
8168SH9ABE2
SPDT
ON
ÑÑÑ
ÑÑÑ
POS. 2
MOM.
MOM. = Momentary
8168SH9ABE2
NOTE: For PC mounting information, see page B-52.
SECTION A-A
ITT Industries
SPDT
Cannon
B-47
www.ittcannon.com
B
Pushbutton
Specifications
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
SWITCHES WITH STANDARD OPTIONS
ÑÑÑ
POS. 1
PART NUMBER
FUNCTION
8161SH9AV2BE2
8168SH9AV2BE2
SPDT
POS. 2
ON
ON
ON
MOM.
MOM. = Momentary
8161SH9AV2BE2
NOTE: For PC mounting information, see page B-53.
SPDT
SECTION A-A
B
Pushbutton
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
ÑÑÑ
ÑÑÑ
POS. 2
8161 (STD.)
ON
8168 (STD.)
ON
MOM.
8261 (STD.)
ON
ON
POS. 1
POS. 2
SCHEMATIC
ON
SP
DP
CONNECTED TERMINALS
23
2-3
21
2-1
SPDT
2-3,5-6
2-1,5-4
DPDT
MOM. = Momentary
All models
with all options when ordered with G, L, M or Q contact material.
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J80
SNAP-IN
PANEL MOUNTING
*
OPTION
CODE
CAP COLOR
2
(STD.) BLACK
1
WHITE
3
RED
No frame color choice required.
* Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,31/3,18)
thick panels.
Cap Finish: matte.
Other colors available, consult
Customer Service Center.
NOTE: Available with C, W, W3, Z or
Z3 terminations.
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J81
FRAME COLOR
SNAP-IN WITH FRAME
PANEL MOUNTING
*
* Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,31/3,18)
thick panels.
ITT Industries
OPTION
CODE
CAP AND FRAME
COLOR
2
(STD.) BLACK
1
WHITE
3
RED
Cap and Frame Finish: matte.
Other colors available, consult
Customer Service Center.
NOTE: Available with C, W, W3, Z or
Z3 terminations.
Cannon
B-48
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J82
FRAME COLOR
SNAP-IN WITH FRAME AND LED
PANEL MOUNTING
B
*
Pushbutton
* Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,31/3,18)
thick panels.
LED not included.
For LED information, see page L-30.
OPTION
CODE
CAP AND FRAME
COLOR
2
(STD.) BLACK
1
WHITE
3
RED
Cap and Frame Finish: matte. Other colors
available, consult Customer Service Center.
NOTE: Available with C, W, W3, Z or Z3
terminations.
CAP COLOR
LED COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J86
FRAME COLOR
SNAP-IN WITH FRAME AND LED
PANEL MOUNTING
*
* Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,31/3,18)
thick panels.
For LED information, see page L-30.
OPTION
CODE
CAP AND FRAME
COLOR
2
(STD.) BLACK
1
WHITE
3
RED
ITT Industries
OPTION
CODE
Cap and Frame Finish: matte. Other colors
available, consult Customer Service Center.
NOTE: Available with C, W, W3, Z or Z3
terminations and SPDT models only.
LED COLOR
3
(STD.) RED
5
YELLOW
6
GREEN
Cannon
B-49
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J96
LED COLOR
PC WITH V-BRACKET AND LED
PC MOUNTING
Pushbutton
B
For LED information, see page L-30.
OPTION
CODE
CAP COLOR
OPTION
CODE
2
(STD.) BLACK
1
WHITE
Cap Finish: matte. Other colors available,
consult Customer Service Center.
3
RED
NOTE: Available with V3 termination and
SPDT models only.
LED COLOR
3
(STD.) RED
5
YELLOW
6
GREEN
CAP COLOR
PLUNGER
ACTUATOR OR PLUNGER
S
(STD.) PLUNGER WITH CAP P/N 7527
S1
PLUNGER WITH CAP P/N 7089
S2
PLUNGER WITH CAP P/N 8018
S, S1, S2 plunger dimensions.
Plunger material: Glass filled
nylon or glass filled polyester
(UL 94V-0).
L
PLUNGER WITH CAP P/N 8941
L1
PLUNGER WITH CAP P/N 8940
L, L1 plunger dimensions.
Plunger Material: Brass,
chrome plated.
OPTION
CODE
CAP COLOR
2
(STD.) BLACK
1
WHITE
3
RED
Cap Finish: gloss. Cap supplied not installed.
Other colors available, consult Customer
Service Center.
NOTE: When selecting plunger and cap option, bushing selection must also be made, see next page.
ITT Industries
Cannon
B-50
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
BUSHING
H (STD.) .300 HIGH THREADED, FLAT
H9 (STD.) .300 HIGH UNTHREADED, FLAT
NONE
Y3
NO BUSHING CHOICE REQUIRED
(JXX ACTUATORS)
7.6mm THREADED, KEYWAY
1/4–40 UNS-2A
B
Withstands 12 in./lbs. of torque with no distortion.
NOTE: When selecting bushing option, plunger selection must also be made, see previous page. No bushing option choice required when any JXX actuator option is selected.
PANEL MOUNTING
1/4 IN. BUSHING
Without Locking Ring
With Standard Locking Ring
METRIC BUSHING
With Small Locking Ring
Without Locking Ring
With Locking Ring
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles and finishes available, see section L.
TERMINATIONS
C
Z
(STD.) PC THRU-HOLE
(STD.) SOLDER LUG
PC MOUNTING
SPDT and DPDT
SPDT and DPDT
Z3
W, W3
QUICK CONNECT
WIRE WRAP
Dim ‘A’
SPDT and DPDT
ITT Industries
Not available with K, L or M contact material.
Mating quick connector available; order part
number 530100000.
Not available with K, L or M contact material.
OPTION
CODE
DIM ‘A’
W
.750 (19,05)
W3
.425 (10,80)
SPDT and DPDT
Cannon
B-51
www.ittcannon.com
Pushbutton
Withstands 12 in./lbs. of torque with no distortion.
H bushing standard with C, W, W3, Z or Z3 terminations.
H9 bushing standard with A, A3, AV2, AV3, AW or
V2-V61 terminations.
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
8161SH9ABE2
SPDT
Pushbutton
B
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
SECTION A-A
AW
RIGHT ANGLE, EXTENDED, PC THRU-HOLE
PC MOUNTING
.44 (11,2)
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
A
NOTE: PC pattern must clear switch support leg.
RIGHT ANGLE, PC THRU-HOLE
8261SH9ABE2
SECTION A-A
DPDT
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW
RIGHT ANGLE, EXTENDED, PC THRU-HOLE
PC MOUNTING
.19 (4,8)
.33 (8,4)
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
ITT Industries
Cannon
B-52
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
AV2
(STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150 PITCH
8161SH9AV2BE2
SPDT
SECTION A-A
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150 PITCH
Pushbutton
AV3
PC MOUNTING
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
AV2
(STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150 PITCH
8261SH9AV2BE2
SECTION A-A
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150 PITCH
DPDT
PC MOUNTING
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
ITT Industries
Cannon
B-53
B
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Pushbutton
B
OPTION
CODE
SNAP-IN
V2, V21
DIM ‘A’
.555 (14,10)
8161SH9__BE2
V6, V61
.460 (11, 68)
SPDT
V7
.630 (16, 00)
V8
.953 (24, 21)
Not available with I seal.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
DIM ‘A’
SNAP-IN
V2, V21
8261SH9__BE2
DPDT
.555 (14,10)
V6, V61
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
Not available with I seal.
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
SNAP-IN
8161SH9__BE2
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
V4
.630 (16,00)
V9
1.150 (29,21)
Not available with I seal.
ITT Industries
Cannon
B-54
www.ittcannon.com
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
8261SH9__BE2
DPDT
DIM ‘A’
V3, V31
.460 (11,68)
V4
.630 (16,00)
V9
1.150 (29,21)
Not available with I seal.
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
RATINGS
GOLD 1
B (STD.)
GOLD 1
K
LOW LEVEL/DRY CIRCUIT
TIN-LEAD 6
0.4 VA MAX. @ 20 V AC OR DC MAX.
SILVER 5
Q (STD.)
45
SILVER 4,5
POWER
TIN-LEAD 6
M
G
TERMINAL
PLATING
GOLD OVER SILVER 2,3
GOLD 3
TIN-LEAD 6
L
6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
LOW LEVEL/DRY CIRCUIT OR POWER
0.4
0
4 VA MAX.
MAX @ 20 V AC OR DC MAX.
MAX OR 6 AMPS @ 120 V AC OR
28 V DC; 3 AMPS @ 250 V AC.
CONTACT MATERIAL/APPLICATION RECOMMENDATIONS–SEE CHART, PAGE L-31.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
All models
with all options when ordered with G, L, M or Q contact material.
B contact material standard with all terminations except C, Z & Z3.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
Q contact material standard with C, Z & Z3 terminations.
4
END CONTACTS: Coin silver, silver plated.
K, L & M contact materials not available with Z & Z3 terminations.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
SEAL
E
I
(STD.) EPOXY SEAL
EPOXY POTTED BASE
DPDT
SPDT
NOTE: Available with C, W, W3, Z, Z3 terminations only.
ITT Industries
Cannon
B-55
www.ittcannon.com
Pushbutton
OPTION
CODE
SNAP-IN
B