Data Sheet VI-J00, VE-J00 Half Brick DC-DC Converters 25 to 100 Watts Features • • • • • • • • • • • • RoHS compliant (VE versions) Up to 50 Watts per cubic inch cULus, cTÜVus CE Marked Up to 90% efficiency Size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) Remote sense and current limit Logic disable Wide range output adjust ZCS power architecture Low noise FM control Isolated output Product Highlights The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100 W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100˚C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements. Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. Part Numbering VI Family Series VI = Non-RoHS J = J00 VE = RoHS Note: For additional packaging options, please see page 4. — J 6 Input 1 — C W Output Grade Power 0 = 12 V N = 48 V Z = 2V M = 10 V K = 40 V E = –10 to 100°C ≥ 5V <5 V = 24 V 4 = 72 V Y = 3.3 V 1 = 12 V 4 = 48 V C = –25 to 100°C W = 100 W W = 20 A 1 = 24 V T = 110 V 0 = 5V P = 13.8 V H = 52 V I = – 40 to 100°C X = 75 W X = 15 A W = 24 V 5 = 150 V X = 5.2 V 2 = 15 V F = 72 V M = –55 to 100°C Y = 50 W Y = 10 A 2 = 36 V 6 = 300 V W = 5.5 V N = 18.5 V D = 85 V Z = 25 W Z=5A 3 = 48 V 7 = 150/300 V V = 5.8 V 3 = 24 V B = 95 V T = 6.5 V L = 28 V R = 7.5 V J = 36 V Maximum Power Available for VI-Jxx-xx Output Input Voltage Nom. (Range) Low Line 75% Max Power 12 (10-20) n/a 22 0 Vin Transient[a] Designators 2 Z X 3.3 Y 5 0 X Y Vout Designators 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 X W V T R M 1 P 2 N 3 L Y Y Y Y Y X X X X X X X 36 40 J K 48 4 52 H 72 85 F D 95 B X X X X X X X 24 (10-36) n/a n/a V -- Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y -- -- -- -- 24 (21-32) 18 36 1 W W W W W W X X W W W W W W W W W W W W W W 24 (18-36) n/a n/a W W W W W W W X X W W W W W W W W W W W W W W 36 (21-56) 18 60 2 Y Y Y Y Y Y Y Y X X X X X X X X X X X -- -- -W 48 (42-60) 36 72 3 W W W W W W X X W W W W W W W W W W W W W 48 (36-76) n/a n/a N W W X X X X X X W W W W W W W W W W W W W W 72 (55-100) 45 110 4 W W W W W W X X W W W W W W W W W W W W W W 110 (66-160) n/a n/a T W W X X X X X X W W W W W W W W W W W W -- -- 150 (100-200) 85 215 5 W W W W W W X X W W W W W W W W W W W W W W 150 (100-375) 90 n/a 7 Y Y Y Y Y Y Y Y X X X X X X X X X X X -- -- -- 300 (200-400) 170 425 6 W W W W W W X X W W W W W W W W W W W W W W [a] Transient voltage for 1 second. Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Set your site on VICOR at vicorpower.com Rev. 2.3 Page 1 of 5 CONVERTER SPECIFICATIONS (typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified) INPUT SPECIFICATIONS VI-J00 E-Grade Parameter Min Typ Inrush charge 60x 10 Input reflected ripple current – pp VI-J00 C-, I-, M-Grade Max Min Typ -6 60x 10 10% 100 x 10 ( ) 20+ 20 Log ( Vin ) ( ) 30+ 20 Log Vin Vout Vout Vout No load power dissipation 1.35 2 Units -6 10% 25+ 20 Log Vin Input ripple rejection Max -6 1.35 Coulombs Test Conditions Nominal line IIN Nominal line, full load dB 120 Hz, nominal line dB 2400 Hz, nominal line 2 Watts Typ Max Units OUTPUT CHARACTERISTICS VI-J00 E-Grade Parameter Min Setpoint accuracy VI-J00 C-, I-, M-Grade Typ Max 1% 2% 0.5% 1% VNOM 0.5% 0.05% 0.2% VNOM LL to HL, 10% to Full Load 1% 0.2% 0.5% VNOM LL to HL, No Load to 10% 0.02 % / °C Load/line regulation Min Output temperature drift 0.02 0.01 Long term drift 0.02 0.02 Output ripple – pp: 2 V, 3.3 V 5V 10 – 95 V [a] Trim range 50% Total remote sense compensation 0.5 Test Conditions Over rated temperature %/1K hours 200 100 150 mV 20 MHz bandwidth 5% 2% 3% VNOM 20 MHz bandwidth 3% 0.75% 1.5% VNOM 20 MHz bandwidth 110% VNOM 110% 50% 0.5 Volts 0.25 V max. neg. leg Automatic restart Current limit 105% 135% 105% 125% INOM Short circuit current 105% 140% 105% 130% INOM [a] 10 V, 12 V, 13.8 V, 15 V outputs, or “V” input range have standard trim range ±10%. Consult factory for wider trim range. 95 V output –50 + 0% trim range. CONTROL PIN SPECIFICATIONS VI-J00 E-Grade Parameter Min Typ VI-J00 C-, I-, M-Grade Max Min Typ Max Units Gate out impedance 50 50 Ohms Gate in impedance 1000 1000 Ohms Gate in high threshold Gate in low threshold Gate in low current 6 6 0.65 0.65 6 Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 Volts Test Conditions Use open collector Volts 6 mA VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Set your site on VICOR at vicorpower.com Rev. 2.3 Page 2 of 5 CONVERTER SPECIFICATIONS (typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified) DIELECTRIC WITHSTAND CHARACTERISTICS VI-J00 E-Grade Parameter Input to output Output to baseplate Input to baseplate Min Typ VI-J00 C-, I-, M-Grade Max Min Typ Max Units Test Conditions Baseplate earthed 3,000 3,000 VRMS 500 500 VRMS 1,500 1,500 VRMS THERMAL CHARACTERISTICS VI-J00 E-Grade Parameter Min Typ Efficiency VI-J00 C-, I-, M-Grade Max Min Typ 78 – 88% 80 – 90% 0.14 0.14 Baseplate to sink Max Units °C/Watt Test Conditions With Vicor P/N 20267 MECHANICAL SPECIFICATIONS VI-J00 E-Grade VI-J00 C-, I-, M-Grade Parameter Min Typ Max Min Typ Max Units Weight 2.9 82.8 3.2 92 3.6 101.2 3.4 96.3 3.8 107 4.1 117.7 Ounces Grams Test Conditions PRODUCT GRADE TEMPERATURES Parameter Storage Operating Units E -20 to +105 -10 to + 100 °C C -40 to +105 -25 to + 100 °C I -55 to +105 -40 to + 100 °C M -65 to +105 -55 to + 100 °C Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Set your site on VICOR at vicorpower.com Notes Rev. 2.3 Page 3 of 5 MECHANICAL DRAWING .49 (12,4) .30±.015 (7,6)±(0,38) 2.28 (57,9) 1.30 (33,0) .65 (16,5) Standard RoHS 0.080 Dia (2) places Solder plate over copper alloy 0.080 Dia (2) places Matte tin over copper alloy Pin # Function +In 1 4 9 3 8 VI-J00 2.10 (53,4) 2 6 1 .15 (3,8) 7 5 1.40 1.00 (35,6) .70 (25,4) .40 (17,8) (10,2) .35± .015 (8,9)±(0,38) Standard 0.040 (1,0) Dia (7) places Solder plate over copper alloy FULL R .15 (3,8) 2 Gate In 3 Gate Out 4 -In 5 +Out 6 +Sense 7 Trim 8 –Sense 9 –Out RoHS 0.040 Dia (7) places Matte tin over copper alloy 2.40 (61,0) Product ID this surface 1.90 (48,3) .30 (7,6) Min. .22 (5,6) Min. .50 (12,7) 1.75 (44,4) Max. +.030 (0,76) -.000 (0) .01 .12 (3,0) Aluminum Base PACKAGING OPTIONS Flangeless package Flangeless package with integral heat sink Longitudinal, 0.25" fins — add suffix “– F1” Longitudinal, 0.50" fins — add suffix “– F2” 2.28"L x 1.80"W x 0.50"H (57,9 x 45,7 x 12,7 mm) MegaMod Jr. Chassis mount alternatives, one, two, or three outputs: up to 300 W 1 up – 2.58¨ x 2.5¨ x 0.62¨ (65,5 x 63,5 x 15,7 mm) 2 up – 2.58¨ x 4.9¨ x 0.62¨ (65,5 x 124,5 x 15,7 mm) 3 up – 2.58¨ x 7.3¨ x 0.62¨ (65,5 x 185,4 x 15,7 mm) To order the SlimMod configuration add the suffix “ – S” to the standard module part number. BusMod Qty (2) grounding clips are included with each SlimMod P/N 32187 Transverse, 0.25" fins — add suffix “– F3” Transverse, 0.50" fins — add suffix “– F4” Available with longitudinal or transverse fins of 0.25" or 0.50" height. Add the appropriate suffix to the module part number. Qty (4) grounding clips are included with each FinMod F1, F2 P/N 32185 F3, F4 P/N 32186 Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 2.28"L x 2.40"W x 1.08"H (57,9 x 61,0 x 27,4 mm) To order the BusMod fully assembled, add suffix “–B1” to the standard module part number. To order the BusMod separately: Half-sized BusMod — P/N 18952 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Set your site on VICOR at vicorpower.com Rev. 2.3 Page 4 of 5 Warranty Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original purchaser only. EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty. Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function, or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it convey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its components in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor against all damages. Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom power systems. Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available upon request. Specifications are subject to change without notice. Intellectual Property Notice Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual Property Department. Vicor Corporation 25 Frontage Road Andover, MA, USA 01810 Tel: 800-735-6200 Fax: 978-475-6715 email Customer Service: [email protected] Technical Support: [email protected] Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Set your site on VICOR at vicorpower.com Rev. 2.3 8/09