Bussmann® Bolt-In Fuses ABI High Current, Time Lag Bolt-in high current, time lag fuse. Ampere ratings from 75 to 200 Amps. IR 1,000A @ 32VDC. Ideal for use in high current heavy-duty applications such as battery and alternator cables. Preliminary blow times: % Rating Time (Seconds) 135 200 350 600 2.46" (62.5) Part No. ABI 75 ABI 100 ABI 125 ABI 150 ABI 175 ABI 200 Amp Rating 75 100 125 150 175 200 1000 30 5 0.06 2.00" (51.0) .85" (21.5) 100A ABI 1.85" (47.0) .47" (12.0) .07" (1.8) .61" (15.4) .53" (13.5) The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled.This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. ABI Page 1 of 1 BIF Document: 2068