Bussmann® Industrial HRC Fuse OSD 21.4 x 95mm, BS88, IEC 269-1 Offset Bolted Tags 80 100 100M125 100M160 Time-Current Characteristic Curve (Full Size Curves Available) 1,000 CURRENT RATING 100 Dimensional Data: K D 10 TIME IN SECONDS CATALOG SYMBOL: OSD INDUSTRIAL HRC FUSE OFFSET BOLTED TAGS PACKAGE QUANTITY: 20 80kA INTERRUPTING RATING MOUNTS ON BH-0111 MODULAR FUSEBLOCK 1 J A F B E H G 1,000 10 100 .01 10,000 .1 CURRENT IN AMPERES Electrical Characteristics Catalog Number Ampere Rating I2T (Amp2 Seconds) PreTotal At Arcing 415V Total At 550V Nom Watts Loss OSD80 80 13,000 35,200 50,000 7.2 OSD100 100 25,000 76,500 95,600 8.5 OSD100M125 100M125 57,000 150,000 — 11 OSD100M160 100M160 72,500 190,000 — 13 Dimensions (Inches/mm) Rated Voltage A B D E F G H J K 550AC 54.5 21.0 95.0 12.7 0.05 73.5 5.5 7.8 22.3 415AC 54.0 25.7 94.5 12.7 1.2 73.0 5.5 7.8 24.7 The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled.This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-28-98 SB98107 Rev. A Form No. OSD Page 1 of 1 BIF Doc #4107