ETC IRGC50B120UB

PD - 93869
IRGC50B120UB
Die in Wafer Form
Features
•
•
•
•
•
G
Benefits
•
•
•
•
1200V
IC(nom)=50A
VCE(on) typ.=3.15V @
IC(nom) @ 25°C
UltraFast IGBT
Short Circuit Rated
150mm Wafer
C
GEN5 Non Punch Through (NPT) Technology
UltraFast
10µs Short Circuit Capability
Square RBSOA
Positive VCE(on) Temperature Coefficient
Benchmark Efficiency above 20KHz
Optimized for Welding, UPS, and Induction Heating
Rugged with UltraFast Performance
Excellent Current Sharing in Parallel Operation
E
Electrical Characteristics (Wafer Form)
Parameter
VCE (on)
V(BR)CES
VGE(th)
ICES
IGES
Description
Guaranteed (min, max)
Collector-to-Emitter Saturation Voltage 1.78V min, 2.08V max
Colletor-to-Emitter Breakdown Voltage
1200V min
Gate Threshold Voltage
4.4V min, 6.0V max
Zero Gate Voltage Collector Current
20µA max
Gate-to-Emitter Leakage Current
± 1.1µA max
Test Conditions
IC = 10A, TJ = 25°C, VGE = 15V
TJ = 25°C, ICES = 500µA, VGE = 0V
VGE = VCE , TJ =25°C, IC = 500µA
TJ = 25°C, VCE = 1200V
TJ = 25°C, VGE = +/-20V
Mechanical Data
Nominal Backmetal Composition, (Thickness)
Nominal Front Metal Composition, (Thickness)
Dimensions
Wafer Diameter
Wafer Thickness, Tolerance
Relevant Die Mechanical Dwg. Number
Minimum Street Width
Reject Ink Dot Size
Ink Dot Location
Recommended Storage Environment
Al - Ti - Ni/V - Ag, (1kA - 1kA - 4kA - 6kA)
99% Al/1% Si, (4µm)
0.364" x 0.364"
150mm, with std. < 100 > flat
185µm, +/-15µm
01-5377
100µm
0.25mm diameter minimum
Consistent throughout same wafer lot
Store in original container, in dessicated
nitrogen, with no contamination
For optimum electrical results, die attach
temperature should not exceed 300°C
Recommended Die Attach Conditions
Die Outline
NOT ES :
9.246
[.364]
1. ALL DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ].
7.854
[.309]
2. CONT ROLLING DIMENS ION: [INCH].
3. LET T ER DES IGNAT ION:
S = S OURCE
S K = S OURCE KELVIN
G = GAT E
IS = CURRENT S ENS E
E = EMIT T ER
4. DIMENS IONAL T OLERANCES :
7.757
[.305]
BONDING PADS :
EMITT ER
WIDT H
1.205
[.047]
&
LENGT H
G
1.196
[.047]
www.irf.com
01-5377
< 0.635 T OLERANCE = + /- 0.013
< [.0250] T OLERANCE = + /- [.0005]
> 0.635 T OLERANCE = + /- 0.025
> [.0250] T OLERANCE = + /- [.0010]
OVERALL DIE:
< 1.270 T OLERANCE = + /- 0.102
WIDT H
< [.050] T OLERANCE = + /- [.004]
&
> 1.270 T OLERANCE = + /- 0.203
LENGT H
> [.050] T OLERANCE = + /- [.008]
2/14/2000