PD- 91761 IRG4CC40FB IRG4CC40FB IGBT Die in Wafer Form C 600 V Size 4 Fast Speed 6" Wafer G E Electrical Characteristics ( Wafer Form ) Parameter VCE (on) V(BR)CES VGE(th) ICES IGES Description Collector-to-Emitter Saturation Voltage Colletor-to-Emitter Breakdown Voltage Gate Threshold Voltage Zero Gate Voltage Collector Current Gate-to-Emitter Leakage Current Guaranteed (Min/Max) 4.5V Max. 600V Min. 3.0V Min.,6.0V Max. 300 µA Max. ± 11µA Max. Test Conditions IC = 10A, TJ = 25°C, VGE = 15V TJ = 25°C, ICES = 250µA, VGE = 0V VGE = VCE , TJ =25°C, IC =250µA TJ = 25°C, VCE = 600V TJ = 25°C, VGE = +/- 20V Mechanical Data Nominal Backmetal Composition, Thickness: Nominal Front Metal Composition, Thickness: Dimensions: Wafer Diameter: Wafer thickness: Relevant Die Mechanical Dwg. Number Minimum Street Width Reject Ink Dot Size Ink Dot Location Recommended Storage Environment: Recommended Die Attach Conditions Cr-Ni / V-Ag ( 1kA-2kA-2.5kA ) 99% Al, 1% Si (4 microns) 0.170" x 0.232" 150mm, with std. < 100 > flat .015" + / -.003" 01-5219 100 Microns 0.25mm Diameter Minimum Consistent throughout same wafer lot Store in original container, in dessicated nitrogen, with no contamination For optimum electrical results, die attach temperature should not exceed 300C Reference Standard IR packaged part ( for design ) : IRG4PC40F Die Outline 9/24/98