PD - 93871 IRGC75B120UB Die in Wafer Form Features • • • • • G Benefits • • • • 1200V IC(nom)=75A VCE(on) typ.= 3.1V @ IC(nom) @ 25°C UltraFast IGBT Short Circuit Rated 150mm Wafer C GEN5 Non Punch Through (NPT) Technology UltraFast 10µ s Short Circuit Capability Square RBSOA Positive VCE(on) Temperature Coefficient Benchmark Efficiency above 20KHz Optimized for Welding, UPS, and Induction Heating Rugged with UltraFast Performance Excellent Current Sharing in Parallel Operation E Electrical Characteristics (Wafer Form) Parameter VCE (on) V(BR)CES VGE(th) ICES IGES Description Guaranteed (min, max) Collector-to-Emitter Saturation Voltage 1.54V min, 1.78V max Collector-to-Emitter Breakdown Voltage 1200V min Gate Threshold Voltage 4.4V min, 6.0V max Zero Gate Voltage Collector Current 30µA max Gate-to-Emitter Leakage Current ± 2 µA max Test Conditions I C = 10A, TJ = 25°C, VGE = 15V TJ = 25°C, ICES = 750µA, VGE = 0V VGE = VCE , TJ =25°C, IC = 750µA T J = 25°C, VCE = 1200V TJ = 25°C, V GE = +/-20V Mechanical Data Nominal Backmetal Composition, (Thickness) Nominal Front Metal Composition, (Thickness) Dimensions Wafer Diameter Wafer Thickness, Tolerance Relevant Die Mechanical Dwg. Number Minimum Street Width Reject Ink Dot Size Ink Dot Location Recommended Storage Environment Al - Ti - Ni/V - Ag, (1kA - 1kA - 4kA - 6kA) 99% Al/1% Si, (4µm) 0.443" x 0.443" 150mm, with std. < 100 > flat 185µm, +/-15µm 01-5378 100µm 0.25mm diameter minimum Consistent throughout same wafer lot Store in original container, in dessicated nitrogen, with no contamination For optimum electrical results, die attach temperature should not exceed 300°C Recommended Die Attach Conditions Die Outline NOTES : 11.25 [.443] 1. ALL DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ]. 9.854 [.388] 2. CONTROLLING DIMENS ION: [INCH]. 3. LETTE R DES IGNAT ION: S = S OURCE S K = S OURCE KELVIN G = GAT E IS = CURRENTS ENS E E = E MITT ER 4. DIME NS IONAL T OLERANCES : BONDING PADS : 9.773 [.385] EMITT ER WIDTH 1.32 [.052] & LENGTH G 1.99 [.078] www.irf.com < 0.635 T OLERANCE = + /- 0.013 < [.0250] TOLERANCE = + /- [.0005] > 0.635 T OLERANCE = + /- 0.025 > [.0250] TOLERANCE = + /- [.0010] OVE RALL DIE: < 1.270 T OLERANCE = + /- 0.102 WIDTH < [.050] TOLERANCE = + /- [.004] & > 1.270 T OLERANCE = + /- 0.203 LENGTH > [.050] TOLERANCE = + /- [.008] 01-5378 2/14/2000