Bussmann® Industrial HRC Fuse GF 84 x 212mm, BS88, IEC 269-1 Center Bolted Tags Time-Current Characteristic Curve (Full Size Curves Available) 710 800 CURRENT RATING 10,000 1,000 CATALOG SYMBOL: GF INDUSTRIAL HRC FUSE CENTER BOLTED TAGS PACKAGE QUANTITY: 20 80kA INTERRUPTING RATING TIME IN SECONDS 100 Dimensional Data: B C D 10 J 1 G E • British standard low voltage industrial fuses. • General purpose, type gG. • Used in general industrial motor circuits. .01 1,000 .1 10 100 H 10,000 F A CURRENT IN AMPERES Electrical Characteristics Catalog Number Ampere Rating I2T (Amp2 Seconds x 103) PreTotal At Total At Arcing 415V 550V Watts Loss Nom Rated Voltage GF710 710 3500 8100 11,000 53 550AC GF800 800 5050 11,500 15,500 64 250DC Dimensions (Inches/mm) A B C D E F G H J 15.5 10.5 83.0 9.5 1.0 210.0 185.0 134.0 80.5 25.4 The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-18-98 SB98107 Rev. A Form No. GF Page 1 of 1 BIF Doc #4103