Compact DC RP/RD M New od els Photoelectric Switches Compact 60 x 30 x 13 programmable rectangular photoelectric switches in upright or horizontal mounting ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ One-key self-teach sensitivity adjustment with manual override (remote input) Horizontal and vertical mounting models Full push-button programming Keyboard locking function to prevent accidental or unauthorised programming change User-selectable on-delay or off-delay timer with adjustable time NPN/PNP output with LO/DO NO/NC selection M8 miniature plug-in for easy maintenance M4 screw or DIN rail mounting IP65 protection LED indicators for: On-off detection Weak signal Timer on Dirty optics Locked keyboard Alignment Short-circuit output Signal strength 3 Year Guarantee Options and ordering codes R Compact photoelectric switch R Diffuse (horizontal) D2 Diffuse (vertical) Polarised retroreflective (horizontal) Polarised retroreflective (vertical) D2 / 05 – C D2V 05 P2 2 C 2m cable P M8 4 pin plug connector 50cm diffuse 2m polarised retro-reflective P2V Specifications Supply Response time Output Emission Timer Temperature External light immunity Protections Remote input Voltage Consumption ton or toff Switching frequency Maximum nominal intensity Residual voltage at 100 mA Residual voltage at 10 mA LED Modulation frequency Range Increment duration Operating Storage Incandescent light Sunlight Supply Output Degree of protection On Off Telephone: +44 (0)208 452 6444 10 / 30 VDC Ripple < 10% within here-above specified limits < 40 mA < 500 µs < 1 kHz 100 mA <2V <1V Red (diffuse) infra red (retro) 8 kHz 0 to 5 s with 11 increments First increment: 40 ms, following increments: 500 ms 0 to 60 ˚C -20 to 80˚C 10 000 lux 20 000 lux Inverse polarity protection Permanent short-circuit or over-load protection IP 65 Voltage < 1.4 V Voltage > 3 V IMOnline: www.imopc.com RP/RD Applications ● Position or presence control of parts ● Detection of opaque or transparent parts ● Detection of shiny parts Types of applications Boxes alignment control on a packaging line Cap presence control on a bottle Visualisation and keyboard Sensitivity decrease On delay - Off delay Decrease timer adjustment Wiring connections Sensitivity increase Light on - Dark on Increase timer adjustment Brown Automatic threshold set-up Special functions key 10 - 30 VDC N Output 100 mA max. t t SET + LO-DO Black Microprocessor P Blue Detection Key depressed Keyboard locked White Dirty optics Detection limit Alignment indicator 0V Remote input Timer ON Dimensions (mm) 11 30 Optical axis 30 Cable or M8 plug - 4 pins Cable or M8 plug - 4 pins ø4.1 ø4.1 20 9 t t SET Telephone: +44 (0)208 452 6444 + 60 LO-DO t t SET + LO-DO 13 DIN rail mounting 25.4 15 DIN rail mounting 13 25.4 78 Optical axis IMOnline: www.imopc.com