Universal AC or DC Photoelectric Switches M New od els Multi-purpose AC or DC self-teach rectangular photoelectric switches, with reinforced housing ideal for mechanical handling ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ RJ Self-teach Screw terminals Polarised or diffuse models Relay output NPN/PNP selectable Light on – dark on selectable On/off delay adjustable timer Alignment indicator Dirty optic indicator Remote test input 3 Year Guarantee Options and ordering codes RJ Universal rectangular Photoelectric switches RJ Diffuse detection 1.5m D/01 Diffuse detection 4m D/04 Polarised retroreflective 6m P/06 Polarised retroreflective 10m P/10 D / 01 – R 20/250VAC/DC relay output R 10/30VDC NPNPNP output S PRICE INFORMATION AND ORDERING Specifications Supply Voltage S 10 / 30 VDC R 20/250 VAC/DC Ripple < 10% within here-above specified limits Response time Output Emission Timer Temperature External light immunity Protections Remote input Consumption ton or toff Switching frequency Maximum nominal intensity Residual voltage at 100 mA Residual voltage at 10 mA LED Modulation frequency Type Range – increment duration Operating Storage Incandescent light Sunlight Supply Output Degree of protection On Off 50 mA 500 µs 1 kHz 100 mA <2V <1V Infra red (diffuse) 8 kHz 2 VA 20 ms 25 Hz change over contact relay rated V: 250 VAC permanent maximum 1: 3A Red (retro) 400 Hz retriggerable – ON-delay/OFF-delay 0 to 11s in 23 steps of 50 ms, then 0.5s steps 0 to 60 ˚C -20 to 80˚C 10 000 lux 5˚ from optical axis 20 000 lux 5˚ from optical axis Inverse polarity protection – Short-circuit or over-load – IP 65 and IP 67 Voltage < 1.4 V – Voltage > 3 V – RJ Types of applications Retro-reflex detection Control of presence on a conveyor Visualisation and keyboard Wiring connections Sensitivity increase Light on - Dark on Increase timer adjustment Automatic threshold set-up Special functions key Sensitivity decrease On delay - Off delay Decrease timer adjustment Static (S) Relay (R) t t + SET LO-DO Output 0V Remote test N P NC C NO Detection Dirty optics Detection limit Alignment indicator Terminal cover In case of a short-circuit on the output, both red and green LEDs flash Key depressed Keyboard locked Supply 10/30VDC 0V Timer ON Timer indicator Terminal 250 V – 1.5 mm2 Dimensions (mm) 29 60 5.5 Optical axis ø4 4.5 3 10.8 30 30 80 2 x M4 18 cable seal ø4 to 10mm PRODUCT SPECIFICATION OR TO ORDER