ETC WL36-R230

W
36 Photoelectric
switches
Lichtschranken
Baureihe
WL 27-2
Photoelectric
proximity switches,
BGS
Photoelectric
reflex switches
W 36: Mastering complex
tasks reliably
Through-beam
photoelectric
switches
electric proximity switch, which
also offers adjustable scanning
distance and background
suppression.
Great demands are often placed
on the mechanical endurance of
sensors. Suitable enclosure ratings (depending on the type of
connection) of IP 65 and IP 67,
robust plastic housings, prefailure signalling output and indicator, and insensitivity to ambient
U
light ensure reliable switching in
hostile industrial environments.
Users have long appreciated the
benefits of the W 36 series of
Universal voltage versions, time
photoelectric switches. Thanks to delay, test input and selectable
their design, the devices can be
light- or dark-switching are
used both indoors and outdoors,
additional characteristic features
since all DC types are suitable
of the W 36 series.
for temperatures ranging from
– 40 to + 55 °C and polarising
filters also make it possible to
detect shiny surfaces. The
scanning ranges of the W 36
series speak for themselves:
60 metres for the WS/WE 36
through-beam photoelectric
switch, 22 metres for the WL 36
photoelectric reflex switch and
800 mm for the WT 36 photo-
306
SENSICK CATALOGUE
W 36
m Making sure
that crates are full:
WL 36 photoelectric
reflex switches used
to count coloured
bottles before
packaging.
m WL 36 photoelec-
tric reflex switches
checking the presence of beer crates
before automatic
removal of the bottle
caps.
v WL 36 sensors used to detect mesh
baskets in front of a goods lift.
n Hot or cold, wet,
dry or dusty – WL 36
photoelectric reflex
switches are designed for use under
hostile operating
conditions indoors
and outdoors – here
they are being used
on the roll-up gate of
a carwash.
SENSICK CATALOGUE
307
WT 36 Photoelectric proximity switches, infrared light -- DC/UC, plug connection
Dimensional drawing
Scanning distance
200 . . . 800 mm
14
6
Photoelectric proximity switches
■
28
77
20
2
ø5.5
3
62
28
1
6
34
4
5
64
■
22
Robust plastic housing
Infrared light
Selectable time delay
85
■
36
max.
13
11
7
65
5
Adjustments possible
0.015-0.3 s
8
t0
t3
t4
1
2
3
4
5
WT 36-R 710
WT 36-N 410
WT 36-P 410
WT 36-N 710
WT 36-P 710
Rel. off
t0
t0
t1
t1
t2
t
0.5-12 s
9
t0
t1
t2
t2
t
Rel. on
0.5-12s
1 0
Distance
Distance
Standard direction of the material being scanned
Alignment sight
Centre of optical axis, receiver
Centre of optical axis, sender
LED signal strength indicator
6 M 5 threaded mounting hole – 5.5 mm deep
7 Mounting holes,
recesses on both sides for M 5 hex nuts
8 Time delay selector switch with DC,
time delay and light-/dark-switching selector
switches with UC
X Light-switching
● Dark-switching
9 Time control
1 0 Scanning distance adjustment
Switch-selectable time delay
0.015 – 0.3 s with DC only
t 0 without time delay
t 1 ON-delay
t 2 OFF-delay
C V
Accessories
Cable receptacles
Mounting brackets
page
496
510
0.5 – 12 s with DC
t 0 without time delay
t 3 ON-delay
t 4 OFF-delay
Connection types
WT 36-N 410
WT 36-N 710
WT 36-P 410
WT 36- P 710
WT 36-R 710
4-pin, M 12
7-pin
1
2
3
4
1
3
2
4
7-pin
L+
M
1
2
2
4
5
6
4
5
6
7
308
SENSICK CATALOGUE
L+
1
M
2
3
Q
Q
1
3
Q
4
Q
5
TE
NC
1
2
L1
N
3
4
5
6
7
NC
NC
0.5 – 12 s with UC
t 0 without time delay
t 1 ON-delay
t 2 OFF-delay
WT 36
Technical data
N 410 P 410 N 710 P 710 R 710
WT 36-
Scanning distance
200 . . . 800 mm, adjustable
Light source 1), light type
Light spot diameter
LED, infrared light
Approx. 15 mm at 800 mm
Supply voltage VS
10 . . . 30 V DC 2)
24 . . . 240 V UC (+ 10 % /– 25 %)
≤ 5 VSS
≤ 50 mA
< 2 VA
Ripple 3)
Current consumption 4)
Power consumption
Switching outputs
Output current IA max.
Max. switching voltage
Switching current
Max. switching capacity
Response time 6)
Max. switching frequency 7)
Test input ”TE”, sender OFF
Connection types
VDE protection class 8)
Circuit protection 9)
–
PNP, Q and Q
–
NPN, Q and Q
SPDT, isolated 5)
200 mA
AC: 250 V / DC: 120 V
4 A / 240 V AC or 24 V DC
AC: 1000 VA / DC: 100 W
2 ms
6 ms
250/s
10/s
PNP: Test input to 0 V
NPN: Test input to VS
Plug
V
A, B, C
A, C
IP 65
IP 67
Enclosure rating
Ambient temperature TA
Operation – 40 °C . . . + 55 °C
Operation – 25 °C . . . + 55 °C
Storage – 25 °C . . . + 75 °C
Approx. 200 g
Glass-fibre-reinforced plastic
Weight
Housing material
1) Average service life 100,000 h
at TA = + 25 °C
2) Limit values
3) May not exceed or fall short of
VS tolerances
4) Without load
5) Provide suitable spark suppression for
inductive or capacitive loads
6) Signal transit time with resistive load
7) With light/dark ratio 1:1
8) Reference voltage 50 V DC, 250 V AC
Order information
Type
Part no.
1 011 109
WT 36-N 410
1 011 108
WT 36-P 410
1 006 370
WT 36-N 710
1 006 047
WT 36-P 710
1 005 927
WT 36-R 710
Scanning distance
25
1
200
2
200
0 (mm)
200
600
800
400
600
6%/90%
20
800
1
Scanning distance on black, 6 % remission
Scanning distance on grey, 18 % remission
15
18%/90%
% of scanning distance
1
2
9) A = VS connections reverse-polarity
protected
B = Output QN and QP short-circuit
protected
C = Interference pulse suppression
2
10
5
0
(mm) 300
400
500
600
700
800
SENSICK CATALOGUE
309
WT 36 Photoelectric proximity switches, infrared light -- DC/UC, terminal connection
Dimensional drawing
Scanning distance
200 . . . 800 mm
14
6
Photoelectric proximity switches
■
64
62
4
5
85
ø5.5
3
1
6
■
20
2
7
18
11
■
28
100
28
■
16
Robust plastic housing
Infrared
Adjustable background
suppression
Easily accessible terminal
chamber
Selectable time delay
34
■
36
88
5
Adjustments possible
WT 36-N 210
WT 36-P 210
8
0.015-0.3s
t0
t0
t3
t1
t2
t4
Rel. off
t
t0
t1
t0
t
t1
t2
t2
0.5-12s
9
Rel. on
0.5-12s
Distance
1 0
1 1
1
2
3
4
5
WT 36-R 210
Distance
5
5
4
4
3
3
2
2
1
1
Standard direction of the material being scanned
Alignment sight
Centre of optical axis, receiver
Centre of optical axis, sender
LED signal strength indicator
6 M 5 threaded mounting hole – 5.5 mm deep
7 Mounting holes,
recesses on both sides for M 5 hex nuts
8 Time delay selector switch with DC,
time delay and light-/dark-switching selector
switches with UC
X Light-switching
● Dark-switching
9 Time control
1 0 Scanning distance adjustment
1 1 Terminal connection
Switch-selectable time delay
0.015 – 0.3 s with DC only
t 0 without time delay
t 1 ON-delay
t 2 OFF-delay
C V
0.5 – 12 s with DC
t 0 without time delay
t 3 ON-delay
t 4 OFF-delay
Connection types
WT 36-N 210
WT 36-R 210
WT 36-P 210
Accessories
Mounting brackets
310
SENSICK CATALOGUE
page
PG 11, terminals
PG 11, terminals
510
1
L+
1
L1
2
M
2
N
3
Q
3
4
Q
4
5
TE
5
0.5 – 12 s with UC
t 0 without time delay
t 1 ON-delay
t 2 OFF-delay
WL 27-2
Technical data
N 210 P 210 R 210
WT 36-
Scanning distance
200 . . . 800 mm, adjustable
Light source 1), light type
Light spot diameter
LED, infrared light
Approx. 15 mm at 800 mm
Supply voltage VS
10 . . . 30 V DC 2)
24 . . . 240 V UC (+ 10 % /– 25 %)
≤ 5 VSS
≤ 50 mA
< 2 VA
Ripple 3)
Current consumption 4)
Power consumption
Switching outputs
Output current IA max.
Max. switching voltage
Switching current
Max. switching capacity
Response time 6)
Max. switching frequency 7)
Test input ”TE”, sender OFF
Connection types
VDE protection class 8)
Circuit protection 9)
–
PNP, Q and Q
–
NPN, Q and Q
SPDT, isolated 5)
200 mA
AC: 250 V / DC: 120 V
4 A / 240 V AC or 24 V DC
AC: 1000 VA / DC: 100 W
2 ms
6 ms
250/s
10/s
PNP: Test input to 0 V
NPN: Test input to VS
Terminal connection
V
A, B, C
A, C
IP 67
Enclosure rating
Ambient temperature TA
Operation – 40 °C . . . + 55 °C
Operation – 25 °C . . . + 55 °C
Storage – 25 °C . . . + 70 °C
Approx. 200 g
Glass-fibre-reinforced plastic
Weight
Housing material
1) Average service life 100,000 h
at TA = + 25 °C
2) Limit values
3) May not exceed or fall short of
VS tolerances
4) Without load
5) Provide suitable spark suppression for
inductive or capacitive loads
6) Signal transit time with resistive load
7) With light/dark ratio 1:1
8) Reference voltage 50 V DC, 250 V AC
25
200
2
200
0 (mm)
200
600
800
400
600
6%/90%
20
800
9) A = VS connections reverse-polarity
protected
B = Output QN and QP short-circuit
protected
C = Interference pulse suppression
Order information
Type
Part no.
1 010 109
WT 36-N 210
1 010 108
WT 36-P 210
1 010 110
WT 36-R 210
Scanning distance
1
WT 36
1
Scanning distance on black, 6 % remission
Scanning distance on grey, 18 % remission
15
18%/90%
% of scanning distance
1
2
2
10
5
0
(mm) 300
400
500
600
700
800
SENSICK CATALOGUE
311
WL 36 Photoelectric reflex switches, red light -- DC
Dimensional drawing
Scanning range
22 m
14
5
Photoelectric reflex switches
28
72
20
1
ø5.5
2
52
62
3
6
4
85
■
16
48
■
Robust plastic housing
Visible red light
Selectable time delay
12
■
max.
45
11
6
36
60
4
Adjustments possible
1
2
3
4
5
WL 36-B 230
WL 36-B 430
WL 36-B 730
WL 36-B 330
6
7
t
7
0
2 a
8 1
b
1 0
8
1 1
9
6
9
1 0
5
4
1 2
3
2
1 1
1 2
1
C V
Accessories
Cable receptacles
Mounting brackets
Reflectors
Attachable heated cover
page
496
510
520
556
Alignment sight
Centre of optical axis, receiver
Centre of optical axis, sender
LED signal strength indicator
M 5 threaded mounting hole – 5.5 mm deep
Mounting holes
recesses on both sides for M 5 hex nuts
ON/OFF timer switch
t = Time ON, 0 = Time OFF
Time delay
1 ON-delay
2 OFF-delay
Time control 0.02 to 1 s
Light/dark selector
a = Light-switching, b = Dark-switching
Sensitivity adjustment
Terminal connections
Connection types
WL 36-B 230
WL 36-B 430
WL 36-B 730
WL 36-B 330
PG 11, terminals
7-pin
3-pin
4-pin, M 12
1
L+
2
M
2
3
Alarm
3
4
QP
4
5
QN
5
6
TE
1
1
3
2
4
L+
1
M
2
Alarm
3
QP
4
5
6
1
2
3
4
5
6
7
312
SENSICK CATALOGUE
L+
1
M
2
Alarm
3
QP
4
QN
5
TE
6
NC
1
2
L+
M
(Alarm)
3
QP
(QN)
4
WL 27-2
Technical data
WL 36-
Scanning range, max. typ./on reflector
Sensitivity
Light source 1), light type
Light spot diameter
Supply voltage VS
Ripple 3)
Current consumption 4)
Switching outputs
Light-/dark-switching
Output current IA max.
Response time 5)
Max. switching frequency 6)
Pre-failure signalling output
Internal resistance
Operating condition ”correct”7)
Operating condition ”faulty”
Test input ”TE”
Sender OFF
Connection type
B 230 B 430 B 730 B 330
22 m /PL 80 A
Adjustable
LED, red light
Approx. 50 mm at 3 m
10 . . . 30 V DC 2)
≤ 5 VSS
≤ 40 mA
PNP: QP and NPN QN
PNP: QP
PNP: QP or NPN QN
Switch-selectable
200 mA
≤ 1.25 ms
400/s
Alarm, PNP, open collector
≥ 1.5 kΩ ± 5 %
Output HIGH (VS – 1.5 V)
Switching periodically at 5/s to VS
Sender switched off
Test input to 0 V
PG cable gland
Plug
VDE protection class 8)
Circuit protection 9)
Enclosure rating
V
Ambient temperature TA
Operation – 40 °C . . . + 55 °C
Storage – 40 °C . . . + 70 °C
Approx. 165 g
A, B, C
IP 67
IP 65
Weight
Polarising filter
Housing material
Glass-fibre-reinforced plastic
1) Average service life 100,000 h
at TA = + 25 °C
2) Limit values
5) Signal transit time with resistive load
6) With light/dark ratio 1:1
7) Signal reserve ≥ 50 %
8) Reference voltage 50 V DC
3) May not exceed or fall short of
VS tolerances
4) Without load
9) A = VS connections reverse-polarity
protected
B = Output QN and QP short-circuit
protected
C = Interference pulse suppression
Order information
Type
Part no.
1 005 385
WL 36-B 230
Operating range and operating reserve
1
0.1
2
0.3
3
0.1
4
0.1
11
16
5
0.1
11
16
6
0.1
7
0.25 3
15
9
22
12
100
12
7
18
8
12
16
Reflector type
Operating range
1 PL 80 A
2 C 110
0.1. . .15.0 m
0.3 . . . 9.0 m
6
7
1 010 612
1 008 848
WL 36-B 330
1 005 787
10
4
18
24
■ Operating range ■ Scanning range, max. typical
3
4
5
WL 36-B 430
WL 36-B 730
1
11
PL 50 A
PL 40 A
PL 30 A
PL 20 A
Reflective tape
«Diamond Grade»
0.1. . .12.0 m
0.1. . .11.0 m
0.1. . .11.0 m
0.1. . . 7.0 m
0.25 . . . 3.0 m
Operating reserve
0 (m)
WL 36
5
Operating range
1
3
Scanning range,
max. typical
(m)
5
10
15
20
25
SENSICK CATALOGUE
313
WL 36 Photoelectric reflex switches, red light -- UC
Dimensional drawing
Scanning range
22 m
5
72
ø5.5
2
3
6
4
85
20
1
48
■
28
62
■
16
12
■
Robust plastic housing
Visible red light
Easily accessible terminal
chamber
Selectable time delay
52
■
14
Photoelectric reflex switches
max.
45
11
6
36
60
4
Adjustments possible
1
2
3
4
5
WL 36-R 230
WL 36-R 230
7
t
6
0
2 a
8 1
b
1 0
7
1 1
9
8
6
5
4
1 2
3
9
1 0
2
1
1 1
1 2
Connection types
WL 36-R 230
WL 36-R 730
C V
Accessories
Cable receptacles
Mounting brackets
Reflectors
Attachable heated cover
page
496
510
520
556
PG 11, terminals
7-pin
1
L1
1
2
N
2
3
3
4
4
5
5
1
2
4
5
7
SENSICK CATALOGUE
N
3
6
314
L1
NC
NC
Alignment sight
Centre of optical axis, receiver
Centre of optical axis, sender
LED signal strength indicator
M 5 threaded mounting hole – 5.5 mm deep
Mounting holes
recesses on both sides for M 5 hex nuts
ON/OFF timer switch
t = Time ON, 0 = Time OFF
Time delay
1 ON-delay
2 OFF-delay
Time control 0.5 to 12 s
Light/dark selector
a = Light-switching, b = Dark-switching
Sensitivity adjustment
Terminal connections
WL 27-2
Technical data
WL 36-
WL 36
R 230 R 730
Scanning range, max. typ./on reflector 22 m /PL 80 A
Sensitivity
Adjustable
Light source 1), light type
Light spot diameter
LED, red light
Approx. 50 mm at 3 m
Supply voltage VS
Power consumption
24 . . . 240 V UC (+ 10 % / – 25 %)
< 2 VA
Switching output
Max. switching voltage
Max. switching current
Max. switching capacity
Response time
Max. switching frequency 3)
Light-/dark-switching
SPDT, isolated 2)
AC: 250 V / DC: 120 V
4 A / 240 V AC or 24 V DC
AC: 1000 VA / DC: 100 W
≤ 20 ms
10/s
Switch-selectable
Connection types
PG cable gland
Plug
VDE protection class 4)
Circuit protection 5)
Enclosure rating
V
Ambient temperature TA
Operation – 25 °C . . . + 55 °C
Storage – 40 °C . . . + 70 °C
Approx. 165 g
A, C
IP 67
IP 65
Weight
Polarising filter
Housing material
Glass-fibre-reinforced plastic
1) Average service life 100,000 h
at TA = + 25 °C
2) Provide suitable spark suppression for
inductive or capacitive loads
3) With light/dark ratio 1:1
4) Reference voltage 250 V AC
5) A = VS connections reverse-polarity
protected
C = Interference pulse suppression
Order information
Type
Part no.
1 005 387
WL 36-R 230
Operating range and operating reserve
1
0.1
2
0.3
3
0.1
4
0.1
11
16
5
0.1
11
16
6
0.1
7
0.25 3
15
9
22
WL 36-R 730
12
12
7
100
18
11
1
10
4
8
12
16
18
24
■ Operating range ■ Scanning range, max. typical
Reflector type
Operating range
1 PL 80 A
2 C 110
0.1. . .15.0 m
0.3 . . . 9.0 m
6
7
PL 50 A
PL 40 A
PL 30 A
PL 20 A
Reflective tape
«Diamond Grade»
0.1. . .12.0 m
0.1. . .11.0 m
0.1. . .11.0 m
0.1. . . 7.0 m
0.25 . . . 3.0 m
Operating reserve
0 (m)
3
4
5
1 008 849
5
Operating range
1
3
Scanning range,
max. typical
(m)
5
10
15
20
25
SENSICK CATALOGUE
315
WS/WE 36 Through-beam photoelectric switches, infrared light -- DC
Dimensional drawing
Scanning range
60 m
5
28
72
20
1
ø5.5
2
52
62
3
6
4
85
■
16
48
■
Robust plastic housing
Infrared light
Selectable time delay
12
■
14
Through-beam photoelectric switches
max.
45
11
6
36
60
4
Adjustments possible
1
2
3
4
5
WS/WE 36-B 230
WS/WE 36-B 430
WS/WE 36-B 730
7
t
6
0
2 a
8 1
Alignment sight
Centre of optical axis, receiver
Centre of optical axis, sender
LED signal strength indicator, top and front
M 5 threaded mounting hole – 5.5 mm deep
Mounting holes
recesses on both sides for M 5 hex nuts
ON/OFF timer switch
t = Time ON, 0 = Time OFF
Time delay
1 ON-delay
2 OFF-delay
Time control 0.02 to 1 s
Light/dark selector
a = Light-switching, b = Dark-switching
Sensitivity adjustment
Terminal connections
b
9
1 0
7
1 1
8
1 2
9
1 0
6
5
4
3
2
1
1 1
1 2
Connection types
WS/WE 36-B 230
WS/WE 36-B 430
WS/WE 36-B 730
PG 11, terminals
4-pin, M 12
7-pin
C V
Accessories
Cable receptacles
Mounting brackets
page
496
510
Attachable heated cover
556
Sender
1
L+
1
L+
1
2
M
2
M
2
3
TE
3
3
316
SENSICK CATALOGUE
L+
TE
6
TE
6
1
2
M
2
3
Alarm
3
4
QP
4
5
QN
5
6
M
5
5
1
L+
2
4
4
Receiver
1
1
2
3
4
L+
1
M
2
Alarm
3
QP
4
5
6
1
2
3
4
5
6
7
L+
M
Alarm
QP
QN
TE
NC
WL 27-2
Technical data
WS/WE 36-
Scanning range, max. typical
Sensitivity
60 m
Adjustable
Light source 1), light type
Light spot diameter
LED, infrared light
Approx. 1300 mm at 25 m
Supply voltage VS
Ripple 3)
Current consumption 4)
Switching outputs
10 . . . 30 V DC 2)
≤ 5 VSS
≤ 40 mA
PNP: QP and NPN QN
PNP: QP
Light-/dark-switching
Output current IA max.
Response time 5)
Max. switching frequency 6)
Switch-selectable
200 mA
≤ 2.5 ms
400/s
Pre-failure signalling output
Internal resistance
Operating condition ”correct” 7)
Operating condition ”faulty”
Test input ”TE”
Sender OFF
Alarm, PNP, open collector
≥ 1.5 kΩ ± 5 %
Output HIGH (VS – 1.5 V)
Switching periodically at 5/s to VS
Sender switched off
Test input to 0 V
Connection types
PG cable gland
Plug
VDE protection class 8)
Circuit protection 9)
Enclosure rating
V
Ambient temperature TA
Weight
Housing material
Operation – 40 °C . . . + 55 °C
Storage – 40 °C . . . + 70 °C
Approx. 160 g
Glass-fibre-reinforced plastic
1) Average service life 100,000 h
at TA = + 25 °C
2) Limit values
3) May not exceed or fall short of
VS tolerances
4) Without load
B 230 B 430 B 730
A, B, C
IP 67
IP 65
5) Signal transit time with resistive load
6) With light/dark ratio 1:1
7) Signal reserve ≥ 50 %
8) Reference voltage 50 V DC
0
50
WS/WE 36-B 430
WS/WE 36-B 730
60
100
■ Operating range
30
40
50
1 011 107
1 011 114
60
range,
■ Scanning
max. typical
10
Operating reserve
20
9) A = VS connections reverse-polarity
protected
B = Output QN and QP short-circuit
protected
C = Interference pulse suppression
Order information
Type
Part no.
WS/WE 36-B 230 1 010 922
Operating range and operating reserve
0 (m) 10
WS/WE 36
Operating range
Scanning range, max. typical
1
(m) 30
40
50
60
SENSICK CATALOGUE
317
WS/WE 36 Through-beam photoelectric switches, infrared light -- UC
Dimensional drawing
Scanning range
60 m
14
5
Through-beam photoelectric switches
72
ø5.5
2
3
6
4
85
20
1
48
■
28
62
■
16
12
■
Robust plastic housing
Infrared light
Easily accessible terminal
chamber
Selectable time delay
52
■
max.
45
11
6
36
60
4
Adjustments possible
1
2
3
4
5
WS/WE 36-R 230
WS/WE 36-R 730
7
t
6
0
2 a
8 1
b
1 0
7
1 1
9
8
6
5
4
1 2
3
9
1 0
2
1
1 1
1 2
Connection types
WS/WE 36-R 230
WS/WE 36-R 730
PG 11, terminals
7-pin
C V
Accessories
Cable receptacles
Mounting brackets
page
496
510
Attachable heated cover
556
Sender
1
L1
1
2
N
2
3
3
4
4
5
5
1
3
L1
N
6
Receiver
1
L1
1
2
N
2
3
3
4
4
5
5
1
2
4
5
7
SENSICK CATALOGUE
N
3
6
318
L1
NC
NC
Alignment sight
Centre of optical axis, receiver
Centre of optical axis, sender
LED signal strength indicator, top and front
M 5 threaded mounting hole – 5.5 mm deep
Mounting holes
recesses on both sides for M 5 hex nuts
ON/OFF timer switch
t = Time ON, 0 = Time OFF
Time delay
1 ON-delay
2 OFF-delay
Time control 0.5 to 12 s
Light/dark selector
a = Light-switching, b = Dark-switching
Sensitivity adjustment
Terminal connections
WL 27-2
Technical data
WS/WE 36-
WS/WE 36
R 230 R 730
Scanning range, max. typ./on reflector 60 m
Sensitivity
Adjustable
Light source 1), light type
Light spot diameter
LED, infrared light
Approx. 1300 mm at 25 m
Supply voltage VS
Power consumption
24 . . . 240 V UC (+ 10 % / – 25 %)
< 2 VA
Switching output
Max. switching voltage
Max. switching current
Max. switching capacity
Response time
Max. switching frequency 3)
Light-/dark-switching
SPDT, isolated 2)
AC: 250 V / DC: 120 V
4 A / 240 V AC or 24 V DC
AC: 1000 VA / DC: 100 W
≤ 20 ms
10/s
Switch-selectable
Connection types
PG cable gland
Plug
VDE protection class 4)
Circuit protection 5)
Enclosure rating
V
Ambient temperature TA
Operation – 25 °C . . . + 55 °C
Storage – 40 °C . . . + 70 °C
Approx. 160 g
Glass-fibre-reinforced plastic
A, C
IP 67
IP 65
Weight
Housing material
1) Average service life 100,000 h
at TA = + 25 °C
2) Provide suitable spark suppression for
inductive or capacitive loads
3) With light/dark ratio 1:1
4) Reference voltage 250 V AC
5) A = VS connections reverse-polarity
protected
C = Interference pulse suppression
Order information
Type
Part no.
WS/WE 36-R 230 1 010 978
Operating range and operating reserve
0
50
WS/WE 36-R 730
60
1 010 980
100
20
■ Operating range
30
40
50
60
range,
■ Scanning
max. typical
10
Operating reserve
0 (m) 10
Operating range
Scanning range, max. typical
1
(m) 30
40
50
60
SENSICK CATALOGUE
319