MILITARY DATA SHEET Original Creation Date: 03/19/96 Last Update Date: 07/30/96 Last Major Revision Date: 03/19/96 MN54F164A-X REV 1A0 SERIAL-IN, PARALLEL-OUT SHIFT REGISTER General Description The F164A is a high-speed 8-bit serial-in/parallel-out shift register. Serial data is entered through a 2-input AND gate synchronous with the LOW-to-HIGH transition of the clock. The device features an asynchronous Master Reset which clears the register, setting all outputs LOW independent of the clock. Industry Part Number NS Part Numbers 54F164A 54F164ADMQB 54F164AFMQB 54F164ALMQB Prime Die M164A Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F164A-X REV 1A0 Features - Asynchronous Master Reset Gated Serial Data Input Fully Synchronous Data Transfers 2 MILITARY DATA SHEET MN54F164A-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) ESD Last Passing Voltage (Min) 4000V Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F164A-X REV 1A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, TEMP RANGE: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 100 uA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS -0.6 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIL=0.8V, IOL=20mA 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOH=-1.0mA, VIH=2.0V, VINH=5.5V 1, 3 OUTPUTS 2.5 V 1, 2, 3 IOS Short Circuit Current VCC=5.5V, VINH=5.5V, VM=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2, 3 ICC Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 55 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 4 MILITARY DATA SHEET MN54F164A-X REV 1A0 Electrical Characteristics AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH(1) tpHL(1) tpHL ts(L) ts(H) PARAMETER Propagation Delay Propagation Delay Propagation Delay Setup Time (Low) Setup Time (High) th(H/L) Hold Time or Low) tw(L) Pulse Width (Low) CONDITIONS NOTES VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C MIN MAX UNIT SUBGROUPS 2, 4 CP to Qn 2.5 7.0 ns 9 2, 4 CP to Qn 2.5 9.0 ns 10, 11 2, 4 CP to Qn 3.0 7.5 ns 9 2, 4 CP to Qn 3.0 8.5 ns 10, 11 2, 4 MR to Qn 4.0 10.5 ns 9 2, 4 MR to Qn 4.0 12.5 ns 10, 11 5 A or B to CP 3.0 ns 9 5 A or B to CP 4.0 ns 10, 11 5 A or B to CP 4.5 ns 9 5 A or B to CP 5.5 ns 10, 11 VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 A or B to CP 1.0 ns 9, 10, 11 VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 CP 7.0 ns 9, 10, 11 5 CP VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C (High PINNAME ns tw(H) Pulse Width (High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 CP 4.0 ns 9, 10, 11 tw (L) Pulse Width (Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 MR 5.0 ns 9, 10, 11 tREC Recovery Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MR to CP 5.5 ns 9 5 MR to CP 6.5 ns 10, 11 5 80 MHZ 9 5 60 MHZ 10, 11 fMAX Maximum Count Frequency Note 1: Note 2: Note 3: Note 4: VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -55C temperature, subgroups 10 & 11. 5 MILITARY DATA SHEET MN54F164A-X REV 1A0 (Continued) Note 5: Guaranteed but not tested. (DESIGN CHARACTERIZATION DATA) 6