MILITARY DATA SHEET Original Creation Date: 05/10/96 Last Update Date: 07/30/96 Last Major Revision Date: 05/10/96 MN54F827-X REV 1A0 10-BIT BUFFER/LINE DRIVER General Description The F827 10-bit bus buffer provides high performance bus interface buffering for wide data/address paths or buses carrying parity. The 10-bit buffers have NOR output enables for maximum control flexibility. The F827 is functionally and pin compatible to AMDs AM29827. The F828 is an inverting version of the F827. Industry Part Number NS Part Numbers 54F827 54F827DMQB 54F827FMQB 54F827LMQB Prime Die M827 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F827-X REV 1A0 Features - TRI-STATE output F828 is inverting Direct replacement for AMDs Am29827 and Am29828 2 MILITARY DATA SHEET MN54F827-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0 mA Voltage Applied to Output in HIGH State (with Vcc =0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F827-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input HIGH Current VCC=5.5V, VM=7.0V, VINH=5.5V 1, 3 INPUTS 100 uA 1, 2, 3 IILX Input LOW Current VCC=5.5V, VM=0.5V, VINL=0.0V 1, 3 INPUTS -0.6 mA 1, 2, 3 VOLB Output LOW Voltage VCC=4.5V, VIH=0.8V, VIH=2.0V, IOLB=48mA, VINL=0.0V 1, 3 OUTPUTS .55 V 1, 2, 3 VOH3 Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOH=-3.0mA, VINL=0.0V, VIH=2.0V 1, 3 OUTPUTS 2.4 V 1, 2, 3 VOHB Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOH=-12.0mA, VINL=0.0V, VIH=2.0V 1, 3 OUTPUTS 2.0 V 1, 2, 3 IOS Output Short-Circuit Current VCC=5.5V, VINL=0.0V, VM=0.0V, VINH=5.5V 1, 3 OUTPUTS -100 -225 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2, 3 ICCH Power Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 43 mA 1, 2, 3 ICCL Power Supply Current VCC=5.5V, VINL=0.0V 1, 3 VCC 90 mA 1, 2, 3 ICCZ Power Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 57 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 IOZH Output Leakage Current VCC=5.5V, VM=2.7V, VIH=2.0V, VINH=5.5V, VINL=0.0V 1, 3 OUTPUTS 50 uA 1, 2, 3 IOZL Output Leakage Current VCC=5.5V, VM=0.5V, VIH=2.0V, VINH=5.5V, VIL=0.0V 1, 3 OUTPUTS -50 uA 1, 2, 3 4 MILITARY DATA SHEET MN54F827-X REV 1A0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH tpHL tpZH tpZL tpHZ tpLZ PARAMETER Propagation Delay Propagation Delay Enable Time Enable Time Disable Time Disable Time Note 1: Note 2: Note 3: Note 4: CONDITIONS NOTES VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C PINNAME MIN MAX UNIT 2, 4 Dn to On 1.0 5.5 ns 9 2, 4 Dn to On 1.0 7.5 ns 10, 11 2, 4 Dn to On 1.5 5.5 ns 9 2, 4 Dn to On 1.5 7.0 ns 10, 11 2, 4 OE to On 3.0 9.0 ns 9 2, 4 OE to On 2.5 10.0 ns 10, 11 2, 4 OE to On 3.5 11.5 ns 9 2, 4 OE to On 3.0 12.5 ns 10, 11 2, 4 OE to On 1.5 8.0 ns 9 2, 4 OE to On 1.5 9.0 ns 10, 11 2, 4 OE to On 1.0 8.0 ns 9 2, 4 OE to On 1.0 9.0 ns 10, 11 Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -55C temperature, subgroups 10 & 11. 5 SUBGROUPS