MILITARY DATA SHEET Original Creation Date: 04/22/96 Last Update Date: 07/30/96 Last Major Revision Date: 04/22/96 MN54F299-X REV 1A0 OCTAL UNIVERSAL SHIFT/STORAGE REGISTER WITH COMMON PARALLEL I/O PINS General Description The F299 is an 8-bit universal shift/storage register with TRI-STATE of operation are possible: hold (store), shift left, shift right and parallel load inputs and flip-flop outputs are multiplexed to reduce package pins. Additional outputs, Q0-Q7, are provided to allow easy separate active LOW Master Reset is used to reset the register. outputs. Four modes load data. The the total number of serial cascading. A Industry Part Number NS Part Numbers 54F299 54F299DM 54F299DMQB 54F299FMQB 54F299LMQB Prime Die M299 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F299-X REV 1A0 Features - Common Parallel I/O for Reduced Pin Count Additional Serial Inputs and Outputs for Expansion Four Operating Modes: Shift Left, Shift Right, Load and Store TRI-STATE Outputs for Bus-Oriented Application 2 MILITARY DATA SHEET MN54F299-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) ESD Last Passing Voltage (Min) 4000V Note 1: Note 2: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F299-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V 1, 3 INPUTS 100 uA 1, 2, 3 IBVIT Input High Current VCC=5.5V, VM=5.5V, VINH=5.5V 1, 3 I/O INPUTS 1.0 mA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V 1, 3 ALL OTHER INPUTS -0.6 mA 1, 2, 3 IIL2 Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V 1, 3 Sn INPUTS ONLY -1.2 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIL=0.8V, IOL=20mA, VINH=5.5V 1, 3 Q0 & I/O OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIH=2.0V, IOH=-1.0mA, VINH=5.5V 1, 3 Q0 & 2.5 I/O OUTPUTS V 1, 2, 3 VOH3 Output HIGH Voltage VCC=4.5V, VIH=2.0V, IOH=-3.0mA, VINH=5.5V 1, 3 I/O 2.4 OUTPUTS V 1, 2, 3 IOS Short Circuit Current VCC=5.5V, VINH=5.5V, VM=0.0V 1, 3 Q0 & -60 I/O OUTPUTS -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTSI/O OUTPUTS -1.2 V 1, 2, 3 ICC Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 95 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 IOZHT Output Leakage Current VCC=5.5V, VM=2.7V, VIH=2.0V, VIL=0.8V, VINL=0.0V, VINH=5.5V 1, 3 I/On 70 uA 1, 2, 3 IOZLT Output Leakage Current VCC=5.5V, VM=0.5V, VIH=2.0V, VIL=0.8V, VINL=0.0V, VINH=5.5V 1, 3 I/On -650 uA 1, 2, 3 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH(1) Propagation Delay VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 4 2, 4 CP to I/On 3.5 9.0 ns 9 2, 4 CP to I/On 3.5 10.0 ns 10, 11 MILITARY DATA SHEET MN54F299-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpHL(1) tpLH(2) tpHL(2) tpHL(3) tpHL(4) tpZH tpZL tpHZ tpLZ PARAMETER Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Output Enable Time Output Enable Time Output Disable Time Output Disable Time CONDITIONS NOTES VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C PINNAME MIN MAX UNIT SUBGROUPS 2, 4 CP to I/On 4.0 10.0 ns 9 2, 4 CP to I/On 4.0 11.0 ns 10, 11 2, 4 CP to Q0/Q7 4.0 8.0 ns 9 2, 4 CP to Q0/Q7 4.0 9.0 ns 10, 11 2, 4 CP to Q0/Q7 4.5 8.5 ns 9 2, 4 CP to Q0/Q7 5.5 9.5 ns 10, 11 2, 4 MR to Q0/Q7 5.5 10.5 ns 9 2, 4 MR to Q0/Q7 5.5 12.5 ns 10, 11 2, 4 MR to I/On 5.5 11.0 ns 9 2, 4 MR to I/On 5.5 12.0 ns 10, 11 2, 4 OE to I/On 3.0 8.0 ns 9 2, 4 OE to I/On 3.0 9.5 ns 10, 11 2, 4 OE to I/On 4.0 11.0 ns 9 2, 4 OE to I/On 4.0 13.0 ns 10, 11 2, 4 OE to I/On 1.5 6.0 ns 9 2, 4 OE to I/On 1.5 7.0 ns 10, 11 2, 4 OE to I/On 1.0 5.5 ns 9 2, 4 OE to I/On 1.0 6.5 ns 10, 11 ts(H) Setup Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 S0/S1 to CP 10.0 ns 9, 10, 11 ts(L) Setup Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 S0/S1 to CP 7.5 ns 9, 10, 11 5 MILITARY DATA SHEET MN54F299-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS th(H/L) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 S0/S1 to CP 0.0 ns 9, 10, 11 ts(H/L) Setup Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 I/On , DSn to CP 4.0 ns 9, 10, 11 th(H/L)(2) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 I/On , DSn to CP 1.5 ns 9, 10, 11 tw(H/L) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 CP Pulse Width 5.0 ns 9, 10, 11 tw(L) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MR Pulse Width 6.0 ns 9, 10, 11 Trec Recovery Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MR to CP 8.5 ns 9 5 MR to CP 12.0 ns 10, 11 5 Max Input 100 MHz 9 5 Max Input 85 MHz 10, 11 Fmax Maximum Input Frequency Note 1: Note 2: Note 3: Note 4: Note 5: VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -55C temperature, subgroups 10 & 11. GUARANTEED BUT NOT TESTED (Design Characterization Data) 6