Revised September 2000 74F86 2-Input Exclusive-OR Gate General Description This device contains four independent gates, each of which performs the logic exclusive-OR function. Ordering Code: Order Number Package Number Package Description 74F86SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow 74F86SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74F86PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Unit Loading/Fan Out Pin Names Description An , Bn Inputs On Outputs © 2000 Fairchild Semiconductor Corporation DS009470 U.L. Input IIH/IIL HIGH/LOW Output IOH/IOL 1.0/1.0 20 µA/−0.6 mA 50/33.3 −1 mA/20 mA www.fairchildsemi.com 74F86 2-Input Exclusive-OR Gate April 1988 74F86 Absolute Maximum Ratings(Note 1) Storage Temperature −65°C to +150 °C Recommended Operating Conditions Ambient Temperature under Bias −55°C to +125 °C Free Air Ambient Temperature Junction Temperature under Bias −55°C to +150 °C Supply Voltage 0°C to +70°C +4.5V to +5.5V −0.5V to +7.0V VCC Pin Potential to Ground Pin Input Voltage (Note 2) −0.5V to +7.0V Input Current (Note 2) −30 mA to +5.0 mA Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output −0.5V to VCC 3-STATE Output −0.5V to +5.5V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Current Applied to Output Note 2: Either voltage limit or current limit is sufficient to protect inputs. in LOW State (Max) twice the rated IOL (mA) DC Electrical Characteristics Symbol Parameter Min Typ Max 2.0 Units VCC VIH Input HIGH Voltage VIL Input LOW Voltage 0.8 V VCD Input Clamp Diode Voltage −1.2 V Min VOH Output HIGH Voltage V Min 10% VCC 2.5 5% VCC 2.7 Conditions V Recognized as a HIGH Signal Recognized as a LOW Signal IIN = −18 mA IOH = −1 mA IOH = −1 mA VOL Output LOW Voltage Min IOL = 20 mA IIH Input HIGH Current 5.0 µA Max VIN = 2.7V IBVI Input HIGH Current Breakdown Test 7.0 µA Max VIN = 7.0V ICEX Output HIGH Leakage Current 50 µA Max VOUT = VCC VID Input Leakage Test V 0.0 IOD Output Leakage Circuit Current 3.75 µA 0.0 IIL Input LOW Current −0.6 mA Max VIN = 0.5V IOS Output Short-Circuit Current −150 mA Max VOUT = 0V ICCH Power Supply Current 12 18 mA Max VO = HIGH ICCL Power Supply Current 18 28 mA Max VO = LOW 10% VCC 0.5 4.75 −60 IID = 1.9 µA All other pins grounded VIOD = 150 mV All other pins grounded AC Electrical Characteristics Symbol Parameter TA = +25°C TA = 0°C to +70°C VCC = +5.0V VCC = +5.0V CL = 50 pF CL = 50 pF Min Typ Max Min Max tPLH Propagation Delay 3.0 4.0 5.5 3.0 6.5 tPHL An, Bn to On 3.0 4.2 5.5 3.0 6.5 Units ns (Other Input LOW) tPLH Propagation Delay 3.5 5.3 7.0 3.5 8.0 tPHL An, Bn to On 3.0 4.7 6.5 3.0 7.5 (Other Input HIGH) www.fairchildsemi.com 2 ns 74F86 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com 74F86 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 74F86 2-Input Exclusive-OR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 5 www.fairchildsemi.com