Agilent HDSP-B5xZ Series 31.8 mm (1.25 inch) General Purpose 5 x 7 Dot Matrix Alphanumeric Displays Data Sheet Description These displays have a 31.8 mm (1.25 inch) character height. The devices are available in either common row anode or common row cathode configurations. The displays come in only black face paint. The Bi-color display consists of GaP Red (HER) and GaP Green colors. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/ cosmetic defects. Devices HDSPB5AZ B5BZ Description 31.8 mm Black Surface Bi-Color Common Row Anode 31.8 mm Black Surface Bi-Color Common Row Cathode Note: 1. For details, please contact your local Agilent components sales office or an authorized distributor. Features • 5 x 7 Dot matrix font • X-Y stackable • Pin-out – 26.66 mm (1.05 in.) Dual-In-Line (DIP) leads on 2. mm (0.079 in.) centers • Choice of colors – Bi-color: red and green • Face paint color: black • Design flexibility – Common row anode or common row cathode • Categorized for luminance Applications • Suitable for indoor use • Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85°C or below –35°C • Extreme temperature cycling not recommended[1] Package Dimensions 5.3 x 4 = 21.20 (0.209 x 4 = 0.835) COL 1 ∅3.82 (0.150) 2 ROW 1 2 3 36.95 (1.455) 5.3 x 6 = 31.8 (0.209 x 6 = 1.254) 4 5 6 7 PIN 1 16.00 (0.630) 26.35 (1.037) 36.95 (1.455) PART NO. 9.00 (0.354) 4.19 (0.079) 0.50 (0.020) 2 x 8 = 16.00 (0.079 x 8 = 0.632) 2 26.66 (1.050) 3 4 5 Internal Circuit Diagram HDSP-B5AZ COLUMN 1 1 PIN 3 2 18 17 16 15 ROW 3 1 2 2 3 3 4 4 5 5 6 6 7 7 8 THE SIGN REPRESENTS HER COLOR CHIPS THE SIGN REPRESENTS GREEN COLOR CHIPS PIN CONNECTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CATHODE COLUMN 1 HER ANODE ROW 1 ANODE ROW 2 ANODE ROW 3 ANODE ROW 4 ANODE ROW 5 ANODE ROW 6 ANODE ROW 7 NO PIN CATHODE COLUMN 5 GREEN CATHODE COLUMN 5 HER CATHODE COLUMN 4 GREEN CATHODE COLUMN 4 HER CATHODE COLUMN 3 GREEN 15 16 CATHODE COLUMN 3 HER CATHODE COLUMN 2 GREEN 17 18 CATHODE COLUMN 2 HER CATHODE COLUMN 1 GREEN 4 14 13 5 12 11 10 Internal Circuit Diagram HDSP-B5BZ COLUMN 1 1 PIN 3 2 18 17 16 15 ROW 1 2 2 3 3 4 4 5 5 6 6 7 7 8 PIN 4 THE SIGN REPRESENTS HER COLOR CHIPS THE SIGN REPRESENTS GREEN COLOR CHIPS CONNECTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ANODE COLUMN 1 HER CATHODE ROW 1 CATHODE ROW 2 CATHODE ROW 3 CATHODE ROW 4 CATHODE ROW 5 CATHODE ROW 6 CATHODE ROW 7 NO PIN ANODE COLUMN 5 GREEN ANODE COLUMN 5 HER ANODE COLUMN 4 GREEN ANODE COLUMN 4 HER ANODE COLUMN 3 GREEN 15 16 ANODE COLUMN 3 HER ANODE COLUMN 2 GREEN 17 18 ANODE COLUMN 2 HER ANODE COLUMN 1 GREEN 4 14 13 5 12 11 10 Absolute Maximum Ratings at TA = 25˚C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1] (1/8 Duty Cycle at 10 KHz) Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Lead Solder Temperature for 3 seconds[3] (2 mm [0.078 in.] below seating plane) GaP Red HDSP-B5AZ/B5BZ 36 GaP Green HDSP-B5AZ/B5BZ 36 Units mW 100 13[1,2] 3 –35 to +85 –35 to +85 100 13[1,2] 3 –35 to +85 –35 to +85 mA mA V °C °C 260 260 °C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25°C at 0.17 mA/°C. 3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds. 5 Optical/Electrical Characteristics at TA = 25˚C GaP Red Devices HDSPParameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength B5AZ Dominant Wavelength[2] B5BZ Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR Iv-m Min. Typ. 2 632 622 2.1 Max. 2.6 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor GaP Green Devices HDSPParameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] B5AZ B5BZ Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR Iv-m Min. Typ. 3.4 568 573 2.3 Max. 2.6 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor Bi-Color Devices HDSPParameter Luminance/Unit B5AZ (Digit Average)[1] B5BZ Symbol Iv Min. 124.1 Typ. 215 Max. 372 Units Cd/m 2 Test Conditions IFP = 40 mA, 1/8 Duty Factor Notes: 1. The digits are categorized for luminance. The category is designated by a letter on the side of the package. 2. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 6 Bi-Color (Cd/m2 at IFP = 40 mA, 1/8 Duty Factor) Min.[2] 124.1 149.1 179.1 215.1 258.1 310.1 Bin Name H I J K L M Max.[2] 149 179 215 258 310 372 Hue Grade Coordinate X Y 4 0.542-0.553 0.445-0.456 5 0.552-0.563 0.435-0.446 6 0.562-0.573 0.425-0.436 Bin 7 0.572-0.583 0.415-0.426 8 0.582-0.593 0.405-0.416 9 0.592-0.603 0.395-0.406 Notes: 1. Hue categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. Color Bin Limits (nm)[1] GaP Green Bin Name 3 4 5 Min.[2] 569.1 571.1 573.1 Max.[2] 571 573 575 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each color bin limit is ± 1.0 nm. 7 10 0.602-0.613 0.385-0.396 GaP RED/GaP GREEN 9 6 3 0 0 10 20 30 40 50 60 70 80 90 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable average current per dot vs. ambient temperature. 45 RELATIVE LUMINANCE (NORMALIZED TO 1 AT 40 mA PEAK) 12 IF – FORWARD CURRENT PER DOT – mA IDC – MAXIMUM DC CURRENT PER DOT – mA 15 40 GaP RED 35 30 GaP GREEN 25 20 15 10 5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 IPEAK – PEAK FORWARD CURRENT – mA Figure 3. Relative luminance vs. peak forward current. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability datasheet 31.8 mm General Purpose 5 x 7 Dot Matrix Alphanumeric Displays. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright © 2001 Agilent Technologies, Inc. Obsoletes 5988-1746EN December 30, 2001 5988-5217EN