KELLER INTELLIGENT DIGITAL MANOMETERS MANO GAUGE / MANO RECORD MANO CALI This is a highly accurate microprocessor-controlled pressure measuring instrument. SensoBrainTM, a KELLER-designed low power signal processor, transmits the signals of the pressure- and temperature sensor to the microprocessor, which digitally compensates the sensor data. This mathematical modelling of the pressure sensor virtually eliminates all errors over a wide temperature range. All KELLER- and KAVLICO-sensors are compatible with the electronics of the Intelligent Manometers. MANO GAUGE (Basic Version) Display of: Pressure, Pressure Unit, Temperature, Elapsed Time Alternative: Pressure, Pressure Unit, Max.- and Min. Value All functions are executed with the front key of the instrument. It allows the display to be set to zero and to change the measuring cycle for prolonged battery life. Two pressure sensors can be connected to the MANO GAUGE (optional). Analog outputs can be provided 4…20 mA or 0…10 V (optional). MANO RECORD (MANO GAUGE plus data recording) Based on the MANO GAUGE, the MANO RECORD records and stores the measured values. The front key is used to select which data shall be displayed and stored, and to set the recording interval and the number of readings (memory for 960 or optionally 8100 readings). The read-out of the stored data is via RS 232 serial interface (Logger Software and K101 cable available as option). MANO CALI (CALIBRATOR VERSION plus data recording) In the basic mode, the MANO CALI displays: Pressure, Pressure Unit, Max.- and Min. Values. Units are selected via the front key (bar, PSI, kPa, MPa,…). MANO CALI also incorporates the functions TARA (sets a new temporary zero reference), LEAK (measures a pressure change over a programmable time) and RES (reduces the standard resolution by factor 10). A seperate HOLD-key on the instrument freezes the reading. This instrument has the same data recording features as the MANO RECORD. HOLD-Key (Mano Cali only) ø 76 mm KELLER ≈ 80 mm KELLER ≈ 46 mm ≈ 80 mm KELLER Front Key Button ø 45 HEX 27 G 1/4" Integrated Capacitive Cell (30 mbar…1 bar) HEX 19 G 1/4" Series 11 Transducer (1…10 bar / -1…2 bar / -1…1000 bar) G 1/4" Series 6 Transducer (10…600 bar) Subject to alterations KELLER AG für Druckmesstechnik KELLER Gesellschaft für druckmesstechnik mbH Companies approved to ISO 9001 / EN 29001 St. Gallerstrasse 119 Schwarzwaldstrasse 17 CH-8404 Winterthur D-79798 Jestetten 3/98 Tel. 052 - 232 11 26 Tel. 07745 - 9214 - 0 Fax 052 - 232 70 67 Fax 07745 - 9214 - 50 Internet: http://www.keller-druck.ch KELLER SPECIFICATIONS MANO GAUGE / MANO RECORD MANO CALI Vented Gauge or Absolute Sealed Gauge or Absolute Sealed or Vented Gauge Range Range Range 30 mbar 300 mbar 1000 mbar -1…2 bar 10 bar 30 bar Resolution 0,01 mbar 0,1 mbar 0,3 mbar 1 mbar 3 mbar 10 mbar Resolution 100 bar 300 bar 600 bar 1000 bar -1…2 bar -1…10 bar -1…25 bar 200 bar 350 bar 700 bar 0,03 bar 0,1 bar 0,2 bar 0,3 bar • Specific Characteristics The resolution is determined by the measuring range and the number of measuring points. • Environmental Characteristics Total Accuracy (1) MANO GAUGE / RECORD Range 0…50°C Measuring Interval (2) In MANO GAUGE and MANO RECORD the measuring ranges are divided by 12 bit or 3000 points. In MANO CALI over 13 bit or 6000 points. Resolution 0,5 mbar 1,8 mbar 4,3 mbar 0,03 bar 0,05 bar 0,1 bar Operating Temperature MANO CALI (5) °C - 10…60 ± 0,1% typ. 0,05 % typ. Compensated Range °C 0…50 ± 0,2% max. 0,1% max. Storage Temperature °C - 30…80 1 2 Display (5) °C 0…50 sec (1) Includes linearity, repeatability, hysteresis, temperature and resolution of the display (5) others upon request (2) x 2 for two transducers (not for MANO CALI) • Mechanical Characteristics • Electrical Characteristics Supply Manometer Housing Lithium-Battery 3,6 V (included) Battery-Life > 200 days at continuous operation (4) Output Signal (optional) Polyamid 12 Transducer See data sheet of transducer Total Weight approx. 250 g - Analog (3) (MANO RECORD / GAUGE) 4..20 mA or 0..10 V Pressure Connection See data sheet of transducer - Numerical RS 232 Protection IP 65 (MANO RECORD / CALI) (3) The use of an analog signal requires an external supply between 10…28 VDC (4) > 100 days for MANO CALI • Options (on request) - Manometer Housing in Metal* - 1 or 2 external Transducers (remote)* - Transmitter Output Connector* - Special Programs - Logger Software and K101 Cable - Intrinsically Safe Version (EEx-ia)* * only MANO RECORD and MANO GAUGE LOGGER The Logger-Software allows the read-out of the stored data from the Intelligent Manometer. The data transfer takes place via the serial interface on the PC. The MANO RECORD / MANO CALI is connected through a cable K101 (supplied with Logger software). The LOGGER-software offers many further processing possibilities of the read-out data, and meets all the requirements of modern Windows-Software: - Graphical Display - Tabulated Display - Export into other Windows-Programs - Storage into Files Subject to alterations KELLER AG für Druckmesstechnik KELLER Gesellschaft für druckmesstechnik mbH Companies approved to ISO 9001 / EN 29001 St. Gallerstrasse 119 Schwarzwaldstrasse 17 CH-8404 Winterthur D-79798 Jestetten 3/98 Tel. 052 - 232 11 26 Tel. 07745 - 9214 - 0 Fax 052 - 232 70 67 Fax 07745 - 9214 - 50 Internet: http://www.keller-druck.ch