GaAs Transfer Switch DC - 2 GHz SW-362 V 2.00 Features ● ● ● TO-5-4 Broad Bandwidth Low Power Consumption Fast Switching Speed Guaranteed Specifications1 (-55°C to + 85°C) DC – 2.0 GHz Frequency Range Insertion Loss DC – 2.0 GHz DC – 1.0 GHz DC – 0.5 GHz 1.5 dB Max 1.4 dB Max 1.3 dB Max VSWR DC – 2.0 GHz DC – 1.0 GHz DC – 0.5 GHz 1.6:1 Max 1.5:1 Max 1.4:1 Max Isolation DC – 2.0 GHz DC – 1.0 GHz DC – 0.5 GHz 30 dB Min 32 dB Min 35 dB Min Operating Characteristics Impedance 50 Ohms Nominal Switching Characteristics Trise, Tfall (10% to 90%) Ton, Toff (50% CTL to 90%/10% RF) Transients (In-Band) 4 ns Typ 7 ns Typ 25 mV Typ Input Power for 1 dB Compression 0.5 – 2.0 GHz 0.05 GHz Intermodulation Intercept Pt. (for two-tone input power up to +13 dBm) Intercept Points IP2 0.5 – 2.0 GHz +68 0.05 GHz +56 +27 dBm Typ +21 dBm Typ IP3 +46 +40 Functional Schematic (Top View) dBm Typ dBm Typ Control Voltages (Complementary Logic) Vin Low 0 to -0.2V @ 20 µA Max Vin High -5V @ 50 µA Typ to -8V @ 300 µA Max 1. All specifications apply with 50 ohm impedance connected to all RF ports with 0 and -5 Vdc control voltages. 2. Contact the factory for standard or custom screening requirements. Truth Table Ordering Information Model No. Package SW-362 PIN Ceramic Control Input A B Low High High Low Condition of RF path RF1–RF2 RF2–RF3 RF3–RF4 RF1–RF4 OFF ON OFF ON ON OFF ON OFF GaAs Transfer Switch SW-362 V 2.00 Absolute Maximum Ratings Parameter Max. Input Power 0.05 GHz 0.5–2.0 GHz Control Voltage Operating Temperature Storage Temperature 1. Absolute Maximum1 +27 dBm +34 dBm +5V, –8.5V –55˚C to +125°C –65˚C to +150˚C Operation of this device above any one of these parameters may cause permanent damage. Typical Performance