Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH FEATURES • Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns • Axial leads, cylindrical aluminium case, insulated with a blue sleeve • Mounting ring version (single ended) not insulated MBB121 • Case ∅10 × 30 to 21 × 40 mm with pressure relief • Taped versions up to case ∅15 × 30 mm available for automatic insertion Fig.1 Component outlines. • Charge and discharge proof • Useful life: 5000 to 15000 hours at 85 °C handbook, halfpage 133 ALL-DIN • High rated voltage: up to 450 V. longer life APPLICATIONS 041 ASH • General purpose, industrial, power supply, audio-video and lighting low voltage • Smoothing, filtering, buffering at high voltages • Boards with restricted mounting height, vibration and shock resistant. 042/043 ASH-ELB 600 V / 24 hours 042/043 ASH 138 AML 105 °C 021 ASM CCB048 QUICK REFERENCE DATA DESCRIPTION Case sizes (∅Dnom × Lnom in mm) VALUE 6.5 × 18 to 10 × 25 10 × 30 to 21 × 40 Rated capacitance range, CR 1 to 220 µF Tolerance on CR −10 to +50% Rated voltage range, UR 160 to 450 V −40 to +85 °C (450 V: −25 to +85 °C) Category temperature range Endurance test at 85 °C A 2000 hours 8000 hours (450 V: 2000 hours) Useful life at 85 °C 5000 hours 15000 hours (450 V: 5000 hours) Useful life at 40 °C 1.4 × IR applied: 120000 hours 1.8 × IR applied: 240000 hours (450 V: 120000 hours) 500 hours 500 hours Shelf life at 0 V, 85 °C Based on sectional specification IEC 384-4/CECC 30300 Climatic category IEC 68 1998 Jan 29 40/085/56 (450 V: 25/085/56) 347 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH Selection chart for CR, UR and relevant nominal case sizes (∅D × L in mm) Preferred types in bold. UR (V) CR (µF) 160 250 350 1.0 − − − 2.2 − 6.5 × 18 − 4.7 6.5 × 18 8 × 18 10 × 18 10 × 25 − − 6.8 − − 10 × 30 10 × 30 10 × 30 10 × 30 8 × 18 10 × 25 12.5 × 30 12.5 × 30 12.5 × 30 12.5 × 30 − 10 × 30 − 12.5 × 30 10 × 25 12.5 × 30 10 15 22 10 × 30 385 400 450 6.5 × 18 − − 8 × 18 − − − − − − 12.5 × 30 15 × 30 15 × 30 12.5 × 30 15 × 30 18 × 30 18 × 30 15 × 30 − − − − − 33 12.5 × 30 15 × 30 18 × 30 18 × 40 18 × 40 18 × 30 47 15 × 30 18 × 30 18 × 40 18 × 40 18 × 40 18 × 40 68 15 × 30 18 × 40 21 × 40 21 × 40 21 × 40 21 × 40 100 18 × 30 21 × 40 − − − − 150 18 × 40 − − − − − 220 21 × 40 − − − − − MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in µF) • Tolerance on rated capacitance, code letter in accordance with “IEC 62” • Rated voltage (in V) • Group number (041, 042 or 043) • Name of manufacturer (PHILIPS) • Date code, in accordance with “IEC 62” • Code indicating factory of origin • Band to identify the negative terminal • ‘+’ sign to indicate the positive terminal. 1998 Jan 29 348 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES 73 handbook, halfpage 1.6 O D L Od + MBC193 - 1 F Dimensions in mm. Form BR: Taped on reel, case ∅D × L = 6.5 × 18 to 15 × 30 mm. Form BA: Taped in box (ammopack), case ∅D × L = 6.5 × 18 to 10 × 25 mm. For dimensions see Table 1. Tape dimensions are specified in this handbook, Section “Packaging”. Fig.2 Dimensional outline; Forms BA and BR. l handbook, full pagewidth L 33 ±1 ∅d ∅D CCB086 F Dimensions in mm. Form AA: Axial in box, case ∅D × L = 10 × 30 to 21 × 40 mm For dimensions see Table 1. For case sizes 18 × 40 mm and 21 × 40 mm, the stated L may be exceeded by 0.7 mm. Fig.3 Dimensional outline; Form AA. 1998 Jan 29 349 A Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage Table 1 041-043 ASH Axial; physical dimensions, mass and packaging information; see Figs 2 and 3 NOMINAL CASE SIZE ∅D × L (mm) CASE CODE AXIAL: FORM AA, BA, and BR 6.5 × 18 8 × 18 10 × 18 10 × 25 10 × 30 12.5 × 30 15 × 30 18 × 30 18 × 40 21 × 40 4 5 6 7 00 01 02 03 04 05 PACKAGING QUANTITIES ∅d (mm) l (mm) ∅Dmax (mm) Lmax (mm) Fmin (mm) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 − − − − 55 ±1 55 ±1 55 ±1 55 ±1 34 ±1 34 ±1 6.9 8.5 10.5 10.5 10.5 13.0 15.5 18.5 18.5 21.5 18.5 18.5 18.5 25.0 30.5 30.5 30.5 30.5 41.5 41.5 25 25 25 30 35 35 35 35 45 45 MASS (g) ≈1.3 ≈1.7 ≈2.5 ≈3.3 ≈4.8 ≈7.4 ≈11.7 ≈12.9 ≈19.4 ≈24.7 FORM AA FORM BA FORM BR − − − − 200 200 200 200 100 100 1000 500 500 500 − − − − − − 1000 500 500 500 500 400 250 − − − D handbook, full pagewidth 120° (3×) 3.6 +0.2 −0.4 D3 90° ±2° (3×) L 1.05 +0.03 (3×) −0.1 1.3 0 (3×) −0.05 d2 1.3 +0.1 (3×) 0 mounting holes Dimensions in mm. Form MR: case ∅D × L = 15 × 30 to 21 × 40 mm. Case not insulated (insulation on request). Especially for applications with severe shocks and vibrations. For dimensions see Table 2. 1 +1.0 −0.5 ∅d1 ∅D2 CCB063 Fig.4 Mounting hole diagram and outline; Form MR; single ended with mounting ring and pins. Table 2 Single ended; physical dimensions, mass and packaging information; see Fig.4 NOMINAL CASE SIZE ∅D × L (mm) CASE CODE 15 × 30 18 × 30 18 × 40 21 × 40 02 03 04 05 1998 Jan 29 SINGLE ENDED WITH MOUNTING RING: FORM MR ∅d1 (mm) ∅d2 (mm) ∅Dmax (mm) ∅D2max (mm) D3 (mm) Lmax (mm) 0.8 0.8 0.8 0.8 1.0 +0.4 1.0 +0.4 1.0 +0.4 1.0 +0.4 15.5 18.5 18.5 21.5 17.5 19.5 19.5 22.5 16.5 ±0.2 18.5 ±0.2 18.5 ±0.2 21.5 ±0.2 33 33 45 45 350 MASS (g) PACKAGING QUANTITIES ≈11.7 ≈12.9 ≈19.4 ≈24.7 200 200 100 100 Electrolytic capacitor 041 series 10 µF/250 V; −10/+50% DESCRIPTION CR rated capacitance at 100 Hz, tolerance −10 to +50% IR rated RMS ripple current at 100 Hz, 85 °C IL1 max. leakage current after 1 minute at UR Nominal case size: ∅10 × 25 mm; Form BA Catalogue number: 2222 041 33109. IL5 max. leakage current after 5 minutes at UR Tan δ max. dissipation factor at 100 Hz ESR equivalent series resistance at 100 Hz (calculated from tan δmax and CR) Z max. impedance at 10 kHz Table 3 Electrical data and ordering information; preferred types in bold CATALOGUE NUMBER 2222 ... ..... 351 UR (V) 160 NOMINAL CASE SIZE ∅D × L (mm) IR IL1 CASE 100 Hz 1 min CODE 85 °C (µA) (mA) 4.7 6.5 × 18 4 50 38 8 0.15 51 26 − 041 21478 041 31478 − 10 8 × 18 5 70 68 14 0.15 24 12 − 041 21109 041 31109 − 22 10 × 25 7 150 130 25 0.15 11 5.5 − 041 21229 041 31229 − IL5 5 min (µA) ESR Z Tan δ 100 Hz 10 kHz 100 Hz (Ω) (Ω) SINGLE ENDED AXIAL IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 10 × 30 00 120 42 25 0.10 6.8 5.5 042 11229 042 21229 − − 12.5 × 30 01 150 58 36 0.10 4.5 3.1 042 11339 042 21339 − − 47 15 × 30 02 190 78 49 0.10 3.2 2.1 042 11479 042 21479 − 042 41479 68 15 × 30 02 230 110 69 0.10 2.2 1.4 042 11689 042 21689 − 042 41689 100 18 × 30 03 350 150 100 0.10 1.5 1.0 042 11101 − − 042 41101 150 18 × 40 04 430 230 150 0.10 1.0 0.7 043 11151 − − 043 41151 220 21 × 40 05 610 330 220 0.10 0.7 0.5 043 11221 − − 043 41221 2.2 6.5 × 18 4 35 28 6 0.10 72 50 − 041 23228 041 33228 − 4.7 8 × 18 5 55 55 11 0.10 34 23 − 041 23478 041 33478 − 10 10 × 25 7 90 95 19 0.10 16 11 − 041 23109 041 33109 − 10 10 × 30 00 72 33 19 0.10 15 11 042 13109 042 23109 − − Product specification 22 33 041-043 ASH 250 CR 100 Hz (µF) Philips Components SYMBOL Ordering example Aluminium electrolytic capacitors Axial Standard, High Voltage 1998 Jan 29 ELECTRICAL DATA AND ORDERING INFORMATION Unless otherwise specified, all electrical values in Table 3 apply at Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75%. A 250 350 352 385 CR 100 Hz (µF) NOMINAL CASE SIZE ∅D × L (mm) 15 12.5 × 30 IR IL1 CASE 100 Hz 1 min CODE 85 °C (µA) (mA) IL5 5 min (µA) ESR Z Tan δ 100 Hz 10 kHz 100 Hz (Ω) (Ω) 01 100 44 27 0.10 10 SINGLE ENDED AXIAL IN BOX FORM AA TAPED ON REEL FORM BR 7.4 042 13159 042 23159 TAPED IN BOX FORM BA MOUNTING RING FORM MR − − 22 12.5 × 30 01 130 60 37 0.10 6.8 5.0 042 13229 042 23229 − − 33 15 × 30 02 160 84 54 0.10 4.5 3.4 042 13339 042 23339 − 042 43339 47 18 × 30 03 220 120 75 0.10 3.2 2.3 042 13479 − − 042 43479 68 18 × 40 04 290 160 110 0.10 2.2 1.7 043 13689 − − 043 43689 100 21 × 40 05 390 240 150 0.10 1.5 1.1 043 13101 − − 043 43101 4.7 10 × 18 6 60 69 14 0.10 34 22 − 041 25478 041 35478 − 6.8 10 × 30 00 60 32 18 0.10 22 14 042 15688 042 25688 − − 10 12.5 × 30 01 90 42 25 0.10 15 10 042 15109 042 25109 − − 15 12.5 × 30 01 100 57 36 0.10 10 6.7 042 15159 042 25159 − − 22 15 × 30 02 140 79 50 0.10 6.8 4.5 042 15229 042 25229 − 042 45229 33 18 × 30 03 160 110 73 0.10 4.5 3.1 042 15339 − − 042 45339 47 18 × 40 04 270 160 100 0.10 3.2 2.1 043 15479 − − 043 45479 68 21 × 40 05 320 220 150 0.10 1.4 043 15689 − − 043 45689 1 6.5 × 18 4 20 19 4 0.10 160 100 − 041 28108 041 38108 − 2.2 8 × 18 5 40 42 8 0.10 72 45 − 041 28228 041 38228 − 4.7 10 × 25 7 70 71 15 0.10 34 22 − 041 28478 041 38478 − 2.2 6.8 10 × 30 00 60 34 20 0.10 22 14 042 18688 042 28688 − − 10 12.5 × 30 01 90 45 27 0.10 15 10 042 18109 042 28109 − − 15 15 × 30 02 110 62 39 0.10 10 6.0 042 18159 042 28159 − 042 48159 03 150 86 55 0.10 6.8 4.1 042 18229 − − 042 48229 04 200 120 80 0.10 4.5 2.7 043 18339 − − 043 48339 47 18 × 40 04 270 170 110 0.10 3.2 2.1 043 18479 − − 043 48479 68 21 × 40 05 320 250 160 0.10 2.2 1.4 043 18689 − − 043 48689 Product specification 18 × 30 18 × 40 041-043 ASH 22 33 Philips Components UR (V) Aluminium electrolytic capacitors Axial Standard, High Voltage 1998 Jan 29 CATALOGUE NUMBER 2222 ... ..... 400 450 CR 100 Hz (µF) NOMINAL CASE SIZE ∅D × L (mm) 6.8 10 × 30 IR IL1 CASE 100 Hz 1 min CODE 85 °C (µA) (mA) IL5 5 min (µA) ESR Z Tan δ 100 Hz 10 kHz 100 Hz (Ω) (Ω) SINGLE ENDED AXIAL IN BOX FORM AA TAPED ON REEL FORM BR 00 82 220 110 0.055 11.5 7.3 042 16688 042 26688 TAPED IN BOX FORM BA MOUNTING RING FORM MR − − 10 12.5 × 30 01 130 240 110 0.055 7.5 4.6 042 16109 042 26109 − − 15 15 × 30 02 160 250 110 0.055 5.0 3.1 042 16159 042 26159 − 042 46159 22 18 × 30 03 210 280 120 0.055 3.5 2.1 042 16229 − − 042 46229 33 18 × 40 04 290 320 130 0.055 2.3 1.4 043 16339 − − 043 46339 47 18 × 40 04 330 370 140 0.055 1.7 1.1 043 16479 − − 043 46479 68 21 × 40 05 430 440 150 0.055 1.2 0.7 043 16689 − − 043 46689 10 × 30 00 60 230 110 0.10 22 14 042 17688 042 27688 − − 10 12.5 × 30 01 90 240 110 0.10 15 10 042 17109 042 27109 − − 15 12.5 × 30 01 100 260 110 0.10 10 6 042 17159 042 27159 − − 6.8 353 22 15 × 30 02 140 290 120 0.10 6.8 4.1 042 17229 042 27229 − 042 47229 33 18 × 30 03 190 330 130 0.10 4.5 2.7 042 17339 − − 042 47339 47 18 × 40 04 250 390 140 0.10 3.2 2.1 043 17479 − − 043 47479 68 21 × 40 05 330 460 160 0.10 2.2 1.4 043 17689 − − 043 47689 Philips Components UR (V) Aluminium electrolytic capacitors Axial Standard, High Voltage 1998 Jan 29 CATALOGUE NUMBER 2222 ... ..... Product specification 041-043 ASH A Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH Additional electrical data PARAMETER VALUE CONDITIONS AXIAL SINGLE ENDED Voltage Surge voltage for short periods Us ≤ 1.15 × UR Us ≤ 1.1 × UR Urev ≤ 1 V UR = 160 to 250 V UR = 350 to 450 V Reverse voltage Current Leakage current after 1 minute: case ∅D × L = 6.5 × 18 to 10 × 25 mm: CV ≤ 1000 µC CV > 1000 µC case ∅D × L = 10 × 30 to 21 × 40 mm: UR = 160 to 385 V UR = 400 and 450 V after 5 minutes: UR = 160 to 385 V: CV ≤ 1000 µC CV > 1000 µC UR = 400 and 450 V IL1 ≤ 0.05CR × UR or 5 µA, whichever is greater IL1 ≤ 0.03CR × UR + 20 µA IL1 ≤ 0.009CR × UR + 10 µA IL1 ≤ 0.009CR × UR + 200 µA IL5 ≤ 0.01CR × UR or 1 µA, whichever is greater IL5 ≤ 0.006CR × UR + 4 µA IL5 ≤ 0.002CR × UR + 100 µA Inductance Equivalent series inductance (ESL) 1998 Jan 29 case ∅D × L mm: 6.5 × 18 8 × 18 10 × 18 10 × 25 10 × 30 12.5 × 30 15 × 30 18 × 30 18 × 40 21 × 40 typ. 15 nH typ. 35 nH typ. 69 nH typ. 38 nH typ. 38 nH typ. 46 nH typ. 48 nH typ. 50 nH typ. 54 nH typ. 59 nH 354 − − − − − − typ. 39 nH typ. 39 nH typ. 39 nH typ. 39 nH Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH Capacitance (C) MGB227 1.2 handbook, 4 columns C C0 1.1 1.0 0.9 0.8 40 20 0 20 40 60 80 100 T amb ( oC) C0 = capacitance at 20 °C, 100 Hz. Fig.5 Typical multiplier of capacitance as a function of ambient temperature Equivalent series resistance (ESR) MGB228 2 10 handbook, 4 columns ESR ESR 0 2 1 10 A 1 Curve 1: case ∅D × L = 10 × 30 to 21 × 40 mm. Curve 2: case ∅D × L = 6.5 × 18 to 10 × 25 mm. ESR0 = typical at 20 °C, 100 Hz. 10 1 50 0 50 T amb ( oC) Fig.6 Typical multiplier of ESR as a function of ambient temperature. 1998 Jan 29 355 100 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH MGB229 1.6 handbook, ESR 4 columns 3 ESR 0 1 1.4 2 1.2 1.0 0.8 0.6 2 1 0.4 3 0.2 Curve 1: case ∅D × L = 10 × 30 mm. Curve 2: case ∅D × L = 21 × 40 mm. Curve 3: case ∅D × L = 6.5 × 18 to 10 × 25 mm. ESR0 = typical at 20 °C, 100 Hz. 0 10 10 2 10 3 10 5 10 4 f (Hz) 10 6 Fig.7 Typical multiplier of ESR as a function of frequency. Impedance (Z) MGB230 10 2 handbook, 4 columns 2 Z Z0 1 10 1 Curve 1: case ∅D × L = 10 × 30 to 21 × 40 mm. Curve 2: case ∅D × L = 6.5 × 18 to 10 × 25 mm. Z0 = impedance at 20 °C, 10 kHz. 10 1 50 0 50 T amb ( oC) Fig.8 Typical multiplier of impedance as a function of ambient temperature. 1998 Jan 29 356 100 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH MGB231 103 handbook, 4 columns 1 Z (Ω) 2 102 3 10 Curve 1: 2.2 µF. Curve 2: 4.7 µF. Curve 3: 10 µF. Case ∅D × L = 8 × 18 mm. Tamb = 20 °C. 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.9 Typical impedance as a function of frequency. MGB232 103 handbook, 4 columns Z (Ω) 102 1 2 3 A 10 Curve 1: 4.7 µF. Curve 2: 10 µF. Curve 3: 22 µF. Case ∅D × L = 10 × 18 and 10 × 25 mm. Tamb = 20 °C. 1 10 2 10 3 10 4 Fig.10 Typical impedance as a function of frequency. 1998 Jan 29 357 10 5 f (Hz) 10 6 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH MGB233 10 3 handbook, 4 columns Z (Ω) 10 2 1 2 3 10 4 5 Curve 1: 10 µF, 350 and 385 V; −40 °C. Curve 2: 15 µF, 250 V; −40 °C. Curve 3: 33 µF, 160 V; −40 °C. Curve 4: 10 µF, 350 and 385 V; 20 °C. Curve 5: 15 µF, 250 V; 20 °C. Curve 6: 33 µF, 160 V; 20 °C. Curve 7: 10 µF, 350 and 385 V; 85 °C. Curve 8: 15 µF, 250 V; 85 °C. Curve 9: 33 µF, 160 V; 85 °C. Case ∅D × L = 12.5 × 30 mm. 1 6 7 8 9 10 1 10 102 103 104 105 106 f (Hz) 10 7 Fig.11 Typical impedance as a function of frequency at different ambient temperatures. 1998 Jan 29 358 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH RIPPLE CURRENT AND USEFUL LIFE Table 4 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 85 °C, 100 Hz FREQUENCY (Hz) IR MULTIPLIER 50 0.75 100 1.0 300 1.15 1000 1.3 3000 1.4 ≥10000 1.5 MBC243 3.3 handbook, full pagewidth IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 4. 0 1.6 0 6. 15 A 20 (1) 30 50 70 1.2 1.0 0.8 0.5 0.0 10 1.4 40 50 60 70 80 90 100 T amb ( oC) IA = actual ripple current at 100 Hz. IR = rated ripple current at 100 Hz, 85 °C. (1) Useful life at 85 °C and IR applied; case ∅D × L = 6.5 × 18 to 10 × 25 mm: 5000 hours case ∅D × L = 10 × 30 to 21 × 40 mm: 15000 hours (450 V: 5000 hours). Fig.12 Multiplier of useful life as a function of ambient temperature and ripple current load. 1998 Jan 29 359 Philips Components Product specification Aluminium electrolytic capacitors Axial Standard, High Voltage 041-043 ASH SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, Section “Tests and Requirements”. Table 5 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 °C; UR applied; case ∅D × L: 6.5 × 18 to 10 × 25 mm: 2000 hours; 10 × 30 to 21 × 40 mm: 8000 hours (450 V: 2000 hours) REQUIREMENTS UR = 160 V; ∆C/C: ±15% UR = 250 to 450 V; ∆C/C: ±10% tan δ ≤ 1.3 × spec. limit Z ≤ 2 × spec. limit IL5 ≤ spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 °C; UR and IR applied; case ∅D × L: 6.5 × 18 to 10 × 25 mm: 5000 hours; 10 × 30 to 21 × 40 mm: 15000 hours (450 V: 5000 hours) UR = 160 V; ∆C/C: ±45% UR = 250 to 450 V; ∆C/C: ±30% tan δ ≤ 3 × spec. limit Z ≤ 3 × spec. limit IL5 ≤ spec. limit no short or open circuit total failure percentage: ≤3% Shelf life (storage at high temperature) 1998 Jan 29 IEC 384-4/ CECC 30300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 hours ∆C/C, tan δ, Z: for requirements see ‘Endurance test’ above after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement IL5 ≤ 2 × spec. limit 360 Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB FEATURES • Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns • Axial leads, cylindrical aluminium case, insulated with a blue sleeve • Case ∅12.5 × 30 to 21 × 40 mm with pressure relief MBB121 • Taped versions up to case ∅15 × 30 mm available for automatic insertion • Charge and discharge proof Fig.1 Component outlines. • Useful life: 15000 hours at 85 °C • High voltage: 5 5 0 V for 24 hours at 8 5 °C • High ripple current capability. handbook, 2 columns 041/043 ASH APPLICATIONS • Electronic lighting ballast, power supply standard HV • Smoothing, filtering, buffering at high voltages 042/043 ASH-ELB (600 V/24 hours) CCB044 • Boards with restricted mounting height, vibration and shock resistant. QUICK REFERENCE DATA DESCRIPTION VALUE Case sizes (∅Dnom × Lnom in mm) 12.5 × 30 to 21 × 40 Rated capacitance range, CR 6.8 to 33 µF Tolerance on CR −10 to +50% Rated voltage, UR 450 V −25 to +85 °C Category temperature range Endurance test at 85 °C 5000 hours Useful life at 85 °C 15000 hours Useful life at 70 °C, IR applied 45000 hours Shelf life at 0 V, 85 °C 500 hours Based on sectional specification IEC 384-4/CECC 30300 Climatic category IEC 68 1998 Jan 29 25/085/56 361 A Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES 73 handbook, halfpage 1.6 O D L Od + MBC193 - 1 Dimensions in mm. Form BR: Taped on reel. Case ∅D × L = 12.5 × 30 and 15 × 30 mm. For dimensions see Table 1. Tape dimensions are specified in this handbook, Section “Packaging”. F Fig.2 Dimensional outline; Form BR. l handbook, full pagewidth 33 ±1 L ∅d ∅D CCB086 F Dimensions in mm. Form AA: Axial in box. Case ∅D × L = 12.5 × 30 to 21 × 40 mm. For dimensions see Table 1. For case ∅D × L = 18 × 40 and 21 × 40 mm, the stated L may be exceeded by 0.7 mm. Fig.3 Dimensional outline; Form AA. Table 1 Axial; physical dimensions, mass and packaging quantities; see Figs 2 and 3 NOMINAL CASE SIZE ∅D × L (mm) CASE CODE AXIAL: FORM AA and BR 12.5 × 30 01 PACKAGING QUANTITIES ∅d (mm) l (mm) ∅Dmax (mm) Lmax (mm) Fmin (mm) 0.8 55 ±1 13.0 30.5 35 MASS (g) FORM AA FORM BR ≈7.4 200 400 15 × 30 02 0.8 55 ±1 15.5 30.5 35 ≈11.7 200 250 18 × 30 03 0.8 55 ±1 18.5 30.5 35 ≈12.9 200 − 18 × 40 04 0.8 34 ±1 18.5 41.5 45 ≈19.4 100 − 21 × 40 05 0.8 34 ±1 21.5 41.5 45 ≈24.7 100 − 1998 Jan 29 362 Nominal case size: ∅15 × 30 mm; Form BR rated capacitance at 100 Hz, tolerance −10/+50% IR rated RMS ripple current at 100 Hz, 85 °C or 10 kHz, 70 °C IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR ESR max. equivalent series resistance at 100 Hz Z max. impedance at 10 kHz UR (V) Catalogue number: 2222 042 92109. Electrical data and ordering information; preferred types in bold NOMINAL CASE SIZE ∅D × L (mm) CASE CODE 12.5 × 30 10 CATALOGUE NUMBER 2222 . . . . . . . . IR 100 Hz 85 °C (mA) IR 10 kHz 70 °C (mA) IL1 1 min (µA) IL5 5 min (µA) ESR 100 Hz (Ω) Z 10 kHz (Ω) 01 110 630 230 105 7.9 15 × 30 02 170 980 240 110 15 18 × 30 03 250 1400 260 22 18 × 40 04 320 1850 290 33 21 × 40 05 390 2200 330 130 CR 100 Hz (µF) 363 450 10 µF/450 V; −10/+50% DESCRIPTION CR Table 2 Electrolytic capacitor 042 series 6.8 AXIAL IN BOX FORM AA TAPED ON REEL FORM BR 4.4 042 91688 042 92688 5.3 3.0 042 91109 042 92109 115 3.6 2.0 042 91159 − 120 2.4 1.4 043 91229 − 1.7 1.0 043 91339 − Philips Components SYMBOL Ordering example Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 1998 Jan 29 ELECTRICAL DATA AND ORDERING INFORMATION Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75%. Product specification 042/043 ASH-ELB A Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods Us ≤ 550 V UR = 450 V Urev ≤ 1 V Reverse voltage Current Leakage current after 1 minute: case ∅D × L = 12.5 × 30 to 21 × 40 mm IL1 ≤ 0.009 × CR × UR + 200 µA after 5 minutes: IL5 ≤ 0.002 × CR × UR + 100 µA UR = 450 V Inductance Equivalent series inductance 1998 Jan 29 case ∅D × L in mm: 12.5 × 30 typ. 46 nH 15 × 30 typ. 48 nH 18 × 30 typ. 50 nH 18 × 40 typ. 54 nH 21 × 40 typ. 59 nH 364 Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB Capacitance (C) MGC541 1.1 handbook, 4 columns C C0 1.0 0.9 0.8 0.7 40 20 0 20 40 60 C0 = capacitance at 20 °C, 100 Hz. 80 T amb ( oC) 100 Fig.4 Typical multiplier of capacitance as a function of ambient temperature. Equivalent series resistance (ESR) MGC542 2 10 handbook, 4 columns ESR ESR 0 10 A 1 1 2 Curve 1: f = 100 Hz. Curve 2: f = 1 kHz. Curve 3: f = 10 kHz. ESR0 = typical at 20 °C. 3 10 1 40 20 0 20 40 60 80 100 T amb ( oC) Fig.5 Typical multiplier of ESR as a function of ambient temperature at different frequencies. 1998 Jan 29 365 Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB MGC543 10 handbook, 4 columns ESR ESR 0 1 1 2 3 0.1 Curve 1: Tamb = 20 °C. Curve 2: Tamb = 40 °C. Curve 3: Tamb = 60 °C. Curve 4: Tamb = 85 °C. ESR0 = typical at 20 °C, 100 Hz. 4 0.01 10 10 2 10 3 10 4 f (Hz) 10 5 Fig.6 Typical multiplier of ESR as a function of frequency at different ambient temperatures. Impedance (Z) MGC544 10 2 handbook, 4 columns Z Z0 10 1 10 1 40 20 0 20 40 60 80 100 T amb ( oC) Z0 = impedance at 20 °C, 10 kHz. Fig.7 Typical multiplier of impedance as a function of ambient temperature. 1998 Jan 29 366 Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB MGC545 104 handbook, 4 columns Z (Ω) 103 102 10 Curve 1: 6.8 µF, case ∅D × L = 12.5 × 30 mm. Curve 2: 10 µF, case ∅D × L = 15 × 30 mm. Curve 3: 15 µF, case ∅D × L = 18 × 30 mm. Curve 4: 22 µF, case ∅D × L = 18 × 40 mm. Curve 5: 33 µF, case ∅D × L = 21 × 40 mm. Tamb = 20 °C. 1 2 3 4 5 1 0 10 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.8 Typical impedance as a function of frequency. MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in µF) • Tolerance on rated capacitance, code letter in accordance with “IEC 62” • Rated voltage (in V) • Catalogue number (last 8 digits) • Name of manufacturer (PHILIPS) A • Date code, in accordance with “IEC 62” • Code indicating factory of origin • Band to identify the negative terminal • ‘+’ sign to indicate the positive terminal. 1998 Jan 29 367 Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB RIPPLE CURRENT AND USEFUL LIFE Table 3 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 85 °C, 100 Hz FREQUENCY (Hz) IR MULTIPLIER 50 0.7 100 1.0 300 1.6 1000 2.5 3000 3.2 ≥10000 3.5 MBC243 3.3 handbook, full pagewidth IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 4. 0 1.6 0 6. 15 20 (1) 30 50 70 1.2 1.0 0.8 0.5 0.0 10 1.4 40 50 60 70 80 90 100 T amb ( oC) IA = actual ripple current at 100 Hz. IR = rated ripple current at 100 Hz, 85 °C. (1) Useful life at 85 °C and IR applied: 15 000 hours. Fig.9 Multiplier of useful life as a function of ambient temperature and ripple current load. 1998 Jan 29 368 Philips Components Product specification Aluminium electrolytic capacitors Axial, High Voltage for Electronic Lighting Ballast 042/043 ASH-ELB SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified this handbook, Section “Tests and Requirements” . Table 4 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 °C; UR applied; 5000 hours REQUIREMENTS ∆C/C: ±10% tan δ ≤ 1.3 × spec. limit Z ≤ 2 × spec. limit IL5 ≤ spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 °C; UR and IR applied; 15000 hours ∆C/C: ±30% tan δ ≤ 3 × spec. limit Z ≤ 3 × spec. limit IL5 ≤ spec. limit no short or open circuit total failure percentage: ≤3% Shelf life (storage at high temperature) IEC 384-4/ CECC 30300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 hours after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement ∆C/C, tan δ, Z: for requirements see ‘Endurance test’ above IL5 ≤ 2 × spec. limit A 1998 Jan 29 369