Series -F40 Dimensions 38 3.2 LED Center of receiver optical axis 18 4 3.5 4 35.1 18 3.2 26 45 Center of emitter optical axis 16 3.5 4 M12x1 Through beam sensor Potentiometer OBE15M-F40-SE4-V1 OBE15M-F40-SE5-V1 M12x1 optional • M8x1 • Cable 15 m Mounting accessories etc., see section "accessories" Features • Light/Dark ON, programmable • Visible red light • Pre-fault indication • Protection degree IP67 • Connector M12 x 1 for fast mounting Electrical connection Emitter: 1 / BN T 3 / BU L+ L- E4, N.O. (Light ON): 2 / WH T 1 / BN 4 / BK 3 / BU E5, N.O. (Light ON): L+ L+ T 1 / BN 4 / BK 3 / BU L+ L+ E5 L- E5, N.C. (Dark ON): LL+ E4 L- 2 / WH T 1 / BN 4 / BK 3 / BU LL+ E5 L- Ausgabedatum 1.3.00 3 / BU 1 / BN 4 / BK E4 L- E4, N.C. (Dark ON): 2 / WH 2 / WH T Subject to reasonable modifications due to technical advances. 1 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com Technical data Model number Valid for the whole family OBE15M-F40-SE4-V1 OBE15M-F40-SE5-V1 Standard conformity Indicating/operating means LED green LED yellow LED red Potentiometer Electrical specifications Rated operational voltage 0 ... 15 m 2 ... 15 m Receiver Light/Dark ON, programmable Visible red light 660 nm 10000 Lux sun light 7500 Lux halogen light EN 60947-5-2 emitter: Power on Switching state (receiver only) Pre-fault indication (receiver only) Adjustment of the sensing range Ue 10 ... 30 V DC , ripple 10 %SS No-load supply current I0 25 mA Time delay before availability tv 30 ms Output Rated operational current Ie 200 mA , short circuit/overload protected Voltage drop Switching frequency Switch-on delay Ambient conditions Ambient temperature Storage temperature Mechanical specifications Protection degree Connection type Material Housing Light exit Mass Ud 2.5 V f 150 Hz 3 ms ton Characteristic curves Characteristic response curve Offset Y [mm] 200 150 100 50 1 2 3 4 5 6 7 8 Distance X [m] X Permissible distance (offset) between the optical axis of the emitter and receiver. Y General specifications Sensing range Adjustment range Reference target Operating mode Light type Ambient light limit -25 ... 70 C (248 ... 343 K) -40 ... 70 C (233 ... 343 K) IP67 according to EN 60529 V1 connector (M12 x 1), 4 pin ABS Scratch resistant plastic plate 40 g (device) Version data OBE15M-F40-SE4-V1 1 switch output E4, npn NO/NC OBE15M-F40-SE5-V1 1 switch output E5, pnp NO/NC Ausgabedatum 1.3.00 Model number Output type Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com 2