Reflection light beam switch OBS6000-L2-..-V1 with 4-pin, M12 connector K Detection range up to 6 m K Glare protected with polarisation filter K Visible red light K Protection degree IP67 K Positioning of the sensor head is possible in two planes K Multitude of mounting possibilities K Mounting only with one tool: the screwdriver K Light/dark ON, programmable 10/8/01 OBS6000-L2-E4-V1 OBS6000-L2-E5-V1 Date of issue: Series VariKont® OBS6000-L2-..-V1 For suitable cable sockets, reflectors and mounting aids refer to chapter "accessories". Subject to reasonable modifications due to technical advances. 1 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Signal output 0 ... 6000 mm 600 ... 6000 mm H85 reflector LED Red, alternating light 15000 Lux EN 60947-5-2 CE LED yellow: switching state LED red: pre-fault indication sensitivity adjuster 10 ... 30 V DC 10 % £ 20 mA £ 20 ms 1 switch output npn, NO Switching type 1 switch output pnp, NO 1 switch output, npn, NO/NC 1 switch output pnp, NC/NO dark ON ◆ ◆ Switching voltage Switching current Voltage drop Switching frequency Response time Ambient temperature Storage temperature Protection degree Connection type Housing Light exit Mass light/dark switching max. 30 V DC max. 250 mA £ 1.5 V £ 200 Hz £ 2.5 ms -25 ... +70 °C -40 ... +80 °C IP67 Connector M12 x 1, 4-pin PBT Scratch resistant plastic lens 60 g ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Date of issue: 10/8/01 Controls Operating voltage Ripple No-load supply current Time delay before availability Series VariKont® OBS6000-L2-E5-V1 Effective detection range Reflector range Reference target Light source Light type Ambient light limit Standard conformity Approvals Function display OBS6000-L2-E4-V1 Ordering code OBS6000-L2-E2-V1 OBS6000-L2-..-V1 OBS6000-L2-E0-V1 Technical Data Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com 2 Diagrams Characteristic response curve OBS6000-L2 Offset Y [mm] 140 120 100 80 60 40 20 0 0 1 2 3 4 5 6 H85 C110-2 H60 H160 F2000 x y 7 Distance X [m] OBS6000-L2 Relative received light strength Reflector type: H85 (80 mm x 80 mm) 600 mm C110_2 (ø = 84 mm) 600 mm H60 (60 mm x 40 mm) 600 mm F2000 (Foil, 100 mm x 100 mm) 600 mm H160 (60 mm x 18 mm) 600 mm 9.0 m 8.0 m 4.0 m 3.0 m 2.4 m Stability control Stability control > 3 1000 H85 C110-2 H60 H160 F2000 Stability control < 3 100 10 3 x 1 2 4 6 8 10 Distance X [m] 10/8/01 0 Date of issue: Series VariKont® OBS6000-L2-..-V1 Subject to reasonable modifications due to technical advances. 3 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com Dimensions and Electrical Connection OBS6000-L2-..-V1 Optical axis receiver Optical axis emitter 20 40 M12 x 1 67 Series VariKont® Dimensions 16 24 40.5 LED 26.5 Unit connector 30 12 40 3 4 2 1 ø5.4 7 10 46.5 55.5 Electrical Connection Option: HID 1 +UB 4 Q 3 0V E2 E4 E5 E4 E5 Date of issue: 10/8/01 2 E0 = Light ON, = Dark ON Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com 4