M8 Inductive DC Proximity Switches M New od els AE1 Compact inductive proximity switches for DC operation ■ ø8 x 45mm ■ Shielded and unshielded models ■ IP67 nickel-plated brass housing ■ Short-circuit protection ■ Rear-mounted LED operation indicator ■ Additional cable exit options available ■ Nominal sensing range shielded 1mm ■ Extended sensing range shielded 1.5mm ■ Unshielded 2mm ■ LED status indicator 360˚ visible 3 Year Guarantee Options and ordering codes AE1 Standard proximity AE1 NO output state A NPN output type N PNP output type P / AN – 1A 60 1.5mm shielded 1 Shielded 2 Unshielded A Standard cable exit H M12 plug cable exit PRICE INFORMATION AND ORDERING Output circuit–wiring connections NPN output D PNP output BROWN 1 R LED BROWN 1 LOAD BLACK 4 C T (or 2 – see note Z below) BLUE LED R Normally closed output types Other cable options: Right angle cable M8 Plug cable exit Customised cables Please contact IMO for price and availability Z OUT BLACK OUT 4 (or 2 – see LOAD note below) D BLUE C 3 3 NOTE: in case of combined load, i.e. resistive and capacitive, the maximum admissible capacity (C) is 0.05µF for maximum output voltage and current. Plug-pin connections M12 plug connector (-) OUT Cable exit option H NOTE: (pin connections): At present, all plug exit sensors have the output on pin 4. According to EEC Directives, the output of NC plug exit models will be changing to pin 2 (NO will remain on pin 4). A plug cable to match these NC sensors MUST be a 4-wire type as 3wire cables are connected to pins 1, 3 and 4 – contact IMO to check stock types. 4 3 1 2 (+) Please see – Full specification page 321 Connector leads page 332 (Out) (Out) See notebelow See note Dimensions (mm) SW13 SW13 SW13 SW13 4 3 45 ■ Shielded version (AE1/**1A model) 3 45 ■ Unshielded version (AE1/**2A model) Standard cable exit Option A Cable: ø3.1mm, 2m length, 0.12mm2 conductor section, PVC material LED M8x1 M8x1 12 M12x1 LED M12x1 M8x1 M8x1 LED LED 12 17.5 4 17.5 65 65 ■ Shielded version (AE1/**1H model) ■ Unshielded version (AE1/**2H model) M12 plug cable exit Option H