60 Watts UNIVERSAL INPUT SWITCH MODE DESKTOP POWER SUPPLIES ELECTRICAL SPECIFICATIONS INPUT Input voltage 85 to 264 VAC Input requency 47 to 440 Hz Input current 1.6A max at low line Safty ground leakage current 0.75mA max @ 240 VAC 50Hz OUTPUT Output voltage PSE60 SERIES See Rating Chart Output current See Rating Chart Output power range 0-60 watts Ripple 1% peak to peak maximum Overvoltage protection Provided on output #1 only; set at 112-132% of its nominal output voltage Overcurrent protection All outputs protected to short circuit conditions Temperature coefficient All outputs ±0.04%/°C maximum Transient response Maximum excursion of 4% or better on all models recovering to 1% of final value within 500uS after a 25% step load change ENVIRONMENTAL DESCRIPTION Operation temperature 0°C to +70°C Derating Derated from 100% at +40°C linearly to 50% at +70°C Storage temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing The PSE60 series of AC/DC switching power supplies offer 60 watts of continuous output power. All models GENERAL meet CISPR class B and FCC class B emission limits, Efficiency and are designed to comply with UL, CSA, VDE and IEC Hold-up time 5 msec minimum requirements. Line regulation ±0.5% maximum at full load FEATURES 65% minimum at 60W output Inrush current 15 amps @ 115 VAC, or 30 amps @ 230 VAC at 25°C cold start Withstand voltage 3000 VAC from input to output, 1500 VAC from input to ground, 500 VAC from output to ground • Optional output connectors • 100% burn-in Insulation resistance 50 Mohm minimum from output to ground • Wide input voltage 85 to 264 VAC Mean time between failure 100,000 hours minimum at full load at 25°C ambient • Input surge current protection EMI requirements Meets conduction limits of (a) FCC 20780 CLASS B (b) CISPR CLASS B Safety requirements Meets or exceeds: (a) UL 1950 (b) CSA C22.2 NO.234 (c) IEC 950 • Overvoltage protection • Overcurrent protection SAFETY APPROVALS • UL, cUL • CE • TUV PO ER tel:01635 521858 fax:01635 523771 www.powersolve.co.uk e-mail: [email protected] OUTPUT VOLTAGE/CURRENT RATING CHART - PSE60 SERIES MODEL NO OUTPUT VOLTAGE OUTPUT CURRENT MAXIMUM OUTPUT POWER PSE60-1XX 5-6 VDC 10.0-8.30A 50W PSE60-11XX 6-9 VDC 9.16-6.11A 55W PSE60-2XX 9-11 VDC 6.50-5.31A 58.5W PSE60-3XX 11-13VDC 5.45-4.61A 60W PSE60-4XX 13-16 VDC 4.61-3.75A 60W PSE60-5XX 16-21 VDC 3.75-2.85A 60W PSE60-6XX 21-27 VDC 2.85-2.22A 60W PSE60-7XX 27-33 VDC 2.22-1.81A 60W PSE60-8XX 33-40 VDC 1.81-1.50A 60W PSE60-9XX 40-50 VDC 1.50-1.20A 60W Note: XX = Output voltage required e.g. 5V part number = PSE60-105 DRAWINGS MECHANICAL DIMENSIONS MM 76.0±1.0 146.00±1.0 AC INPUT IEC 320 INLET 43 .0±1.0 POWER LED NOTE: 1. Optional output connectors: see page Appendix PO ER tel:01635 521858 fax:01635 523771 www.powersolve.co.uk e-mail: [email protected]