MEDICAL & MILITARY PM65 Series 5 0 - 6 5 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C M E D I C A L Features • Low safety ground leakage current. • Wide input range 85 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Open PCB construction. • 100% burn-in at full rated load. Specifications OPERATING INPUT Input Voltage 85–264Vac wide input Frequency 47Hz–63Hz Input Current 1.6A (rms) for 115Vac. 1.0A (rms) for 230Vac. Leakage current 90µA max. @ 115Vac. 60Hz. 150µA max. @ 230Vac. 50Hz. Isolation Input – Output: 4000VAC Input – Ground: 1500VAC Output – Ground: 500VAC Inrush Current 15A @ 115V, 30A @ 230V OUTPUT 336 MTBF 400,000 hrs @ 25°C Efficiency 65%–70% ENVIRONMENTAL Operating Temperature 0°C to 70°C Derating Derate to 50% at 70°C Storage Temperature -40°C to 85°C Relative Humidity 5%–95% non-condensing STANDARDS AND APPROVALS Safety standards UL2601-1, CSA C22.2, TUV EN60601-1 C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN60601-1-2: 2001,EN61000-3-2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11 EN55011 Class B, FCC Class B, VCCI Class B Output Voltage See table Output Voltage Adjustment V1 ±10% Output Current See table EMI standards Ripple & Noise 1% peak to peak MECHANICAL Line Regulation ±0.5% maximum at full load. Dimensions 152.5x89.0x47.5mm Load Regulation See table Weight 400grams. Transient Response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Overvoltage Protection Provided on V1 only. Set at 110%–132% of nominal Overcurrent Protection All outputs protected for short circuit conditions Temperature Coefficient All outputs ±0.04% per °C Holdup Time Typically 10ms at 110VAC MEDICAL & MILITARY PM65 Series 5 0 - 6 5 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C M E D I C A L Selection Table MAX. MODEL OUTPUT #1 NUMBER (1)(2) VNOM OUTPUT #2 VNOM IMIN IMAX OUTPUT #3 TOL VNOM OUTPUT #4 IMIN IMAX TOL VNOM IMIN OUTPUT IMIN IMAX TOL PM65-10A 5V 0A 10A 2% IMAX TOL POWER 50W PM65-12A 12V 0A 5.5A 1% 65W PM65-13A 15V 0A 4.5A 1% 65W PM65-14A 24V 0A 3.0A 1% 65W PM65-16A 30V 0A 2.5A 1% 65W PM65-17A 36V 0A 2.2A 1% PM65-23A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% 65W PM65-24A +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% 65W PM65-25A +5V 1A 6.0A 3% +24V 0.3A 2.0A 5% 65W PM65-30A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -5V 0.1A 0.5A 10% 65W PM65-31A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% 65W PM65-32A +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% -15V 0.1A 0.5A 10% 65W PM65-33A +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% -12V 0.1A 0.5A 10% 65W PM65-39A +5V 1A 6.0A 3% +24V 0.3A 2.0A 5% -12V 0.1A 0.5A 10% 65W PM65-40A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% 65W -5V 0.1A 0.5A 10% 65W NOTES: (1) All multiple output models may be operated at no-load without damage. At no-load, output voltage tolerance increases to 10%. (2) Safety agency approvals are for the above listed models in PCB mounted format. To order a model with a metallic L-bracket or box, change suffix “A” to “B”for L-bracket format, to “C” for enclosed format Pin Chart MODEL/PIN PM65-10A PM65-13A PM65-16A PM65-23A PM65-25A PM65-30AL PM65-32AL PM65-39AL PM65-12A PM65-14A PM65-17A PM65-24A PM65-31AL PM65-33AL PM65-40A 1 2 3 4 5 6 7 8 Output 1 Output 1 Output 1 Output 1 Return Return Return Return Output 1 Output 1 Common Return Common Return Output 2 Output 2 N.C. N.C. Output 1 Output 1 Common Return Common Return Output 2 Output 2 Output 3 N.C. Output 1 Output 1 Common Return Common Return Output 2 Output 2 Output 3 Output 4 Technical Illustration Your dependable power partner – www.powerbox.com.au 337