Low Profile (1.5”) Single, Dual, Triple and Quad Outputs Universal Input Worldwide Agency Approvals Model TEK 100 Smaller than Comparable Models Stock to 6 Weeks Delivery 100 Watt Switch Mode Power Supply The compact TEK100 is The universal input TEK 100 offered in single, dual, triple series is designed for and quad outputs, complete compliance with international 100% Burn-in/ with short-circuit and safety and EMI standards. HiPot Tested overvoltage protection. Specifications Input Specifications Input Voltage: 90-264VAC Input Frequency: 47-63 Hz Input Surge (cold start): 40A max @ 115 VAC, 80A max @ 230 VAC Key Features Reliability (MTBF): 100,000 hrs. Short-Circuit Protection: Hiccup Type Overvoltage Protection: 125% typical Overtemperature Protection Environmental - Operating Temperature: 0 to 50°C Relative Humidity: 0 to 90%, non-condensing - Storage Temperature: -20 to 85°C Relative Humidity: 5 to 95%, non-condensing Output Specifications Output Voltages: 3.3, 5, 12, 15, 24, 48 VDC Adjustability: V1:±5% Output Current: see model table Power Output: 100W, convection cooling Efficiency (@ max load): 70% min. - Total Regulation Single Output: ±1% (0-100% load) Multiple Output: Main Output: ±3% (20-100% load) Auxiliary Outputs: ±5% Temperature Coefficient: 0.1%/°C, max. Ripple and Noise: 1% p-p Overshoot (turn on/off): No overshoot Step Load Response: <5% for 20-100% change Turn-on Delay (120VAC): 1 sec, max. Hold-up Time (120VAC): 20 ms Design Standards Safety: UL, cUL, TUV, VDE, CE (Pending) EMI: FCC Part 15 Class B VDE 0871 Class A Package Size 1.5 (H) x 3.5 (W) x 6.5 (L) inches Output V1 Model Voltage Current TEK100S01 5V 20A (30A PK) TEK100S02 12V 8.5A (12A PK) TEK100S03 15V 7.0A (10A PK) TEK100S04 24V 4.5A (6A PK) TEK100S09 48V 2.2A (3A PK) TEK100D12 5V TEK100D13 TEK100D14 Output V2 Voltage Current 10A (15A PK) 12V 5A (9A PK) 5V 10A (15A PK) 15V 4A (6A PK) 5V 10A (15A PK) 24V 2.5A (6A PK) TEK100T16 5V 10A (15A PK) 12V TEK100T17 5V 10A (15A PK) 15V TEK100Q56 5V 10A (15A PK) TEK100Q57 5V 10A (15A PK) TEK100Q86 5V 10A (15A PK) Output V3* Voltage Current 5A (9A PK) 12V 0.5A (1A PK) 4A (6A PK) 15V 0.5A (1A PK) 12V 5A (9A PK) 12V 15V 4A (6A PK) 15V 24V 2A (3A PK) 12V Output V4* Voltage Current 0.5A (1A PK) 5V 0.5A (1A PK) 0.5A (1A PK) 5V 0.5A (1A PK) 0.5A (1A PK) 12V 0.5A (1A PK) Note: All peak surge currents are less than 30ms Ton and less than 50% duty cycle. * Factory configurable for (+) or (-) output Advance Tektris, Inc. 8130 La Mesa Blvd. La Mesa, CA 91941 TEL: 619-593-5000 FAX: 619-593-5014 Web: http://www.advance-tektris.com E-mail: [email protected]