ZL60005 VCSEL Laser Diode Data Sheet DS5475 Issue 1 July 2002 Ordering Information ZL60005/TBD TO-46 Package ZL60005/TDD ST Housing ZL60005/TGD SMA Housing 0 to +70o C Note: Rated Optical Power apply only on the TO-46 package, for housing options optical power is typically 10%less. Warning: Laser Radiation, avoid exposure to beam. Class 3B laser product, potential eye hazard. Warning labels in each box. Description This High-Power VCSEL (Vertical Cavity Surface-Emitting Laser) is designed for industrial and sensors applications. It operates in multiple transverse and single longitudinal mode, ensuring stable output power and low noise. Features • • • • • High power Low beam divergence Low drive current Hermetically sealed Easy alignment CASE ANODE CATHODE Applications • • • • • 2.5 Fiber optic datalinks Position sensor Range finder Free air datalinks Optical storage 5.4 Bottom View All dimensions in mm. The chip is isolated from the case. Figure 1 - Pin Description Optical and Electrical Characteristics - Case Temperature 250C Parameter Symbol Min Typ Max Unit Test Condition Optical Power Po 5 7 mW IF=40mA Slope Efficiency (dPo/dlF) η 300 mW/A IF=40mA Beam Divergence Θ 11 deg Full Width at I/e2 Bandwidth 3dBel) fc 1 GHz IF=40mA Peak Wavelength λp 830 Spectral Width 845 860 nm IF=40mA ∆λ 0.5 1.5 nm IF=40mA Forward voltage VF 2.0 2.3 V IF=40mA Threshold Current Ith 14 19 mA SEMICMF.019 1 ZL60005 Data Sheet Absolute Maximum Ratings Parameter Symbol Limit Storage Temperature Tstg -55 to +1250C Operating Temperature Top 0 to +700C Electrical Power Dissipation Ptot 100 mW IF 50 mA IFRM 80 mA Reverse Voltage VR 1.5 V Soldering Temperature (2mm from the case for 10 sec. Tsld 2600C Continuous Forward Current (f<10 kHz) Peak Forward Current (duty Cycle<50%, f>1 MHz Thermal characteristics Parameter Symbol Typ Max Unit Thermal Resistance - Infinite Heat Sing Rthjc 200 0C/W Thermal Resistance - No Heat Sink Rthja 500 0C/W dλ/dTj 0.06 nm/0C ∆P 3 dB ∆/th 5 mA Temp Coefficient - Wavelength Optical Power - Variation 0 to 700C Threshold Current - Variation 0 to 2 Min 700C SEMICMF.019 ZL60005 Data Sheet Relative Threshold Current 100 80 60 40 100 80 60 40 20 20 0 20 40 0 Max. Electrical Power Dissipation 2 80 60 40 40 80 100oC 60 0 20 Pel vs T 3V 50 Infinite Heat Sink 40 30 No Heat Sink 20 10 0 0 20 40 60 80 100oC Operating Temperature Forward Voltage 50 mA Pf vs z Alignment % 100 80 60 40 r = opt. = 50 µm See Note 1. 20 c 0 5.4 5.8 6.2 6.6 7.0 7.4 mm z - Axial Displacement of Fiber z = opt. c = 50 µm See Note 1. 80 φ Relative Fiber-Coupled Power 40 Pf vs r Alignment % 100 60 Note 1 40 r z 20 0 30 Forward Current φ 0 1 20 mW 50 0 100 Operating Temperature If vs Vf mA 100 Po vs If 20 80 100oC 60 Operating Temperature Forward Current % 120 Ith vs T Relative Fiber-Coupled Power Relative Optical Power % 120 Relative Optical Power Po vs T % 120 0 10 20 30 40 50 µm r - Radial Displacement of Fiber SEMICMF.017 3 For more information about all Zarlink products visit our Web Site at www.zarlink.com Information relating to products and services furnished herein by Zarlink Semiconductor Inc. trading as Zarlink Semiconductor or its subsidiaries (collectively “Zarlink”) is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request. Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in an I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2002, Zarlink Semiconductor Inc. All Rights Reserved. TECHNICAL DOCUMENTATION - NOT FOR RESALE