ZL60301 Parallel Fiber Optic Transceiver (4 + 4) x 2.72 Gbps Shortform Data Sheet A full Data Sheet is available to qualified customers. To register, please send an email to [email protected]. March 2007 Ordering Information ZL60301MLDC ZL60301MMDC Transceiver Transceiver with EMI-clip 0°C to +80°C • Link reach 300-m with 50/125 µm 500 MHz. km fiber at 2.5 Gbps Features • Channel BER better than 10-12 • Compatible with POP4 MSA usage • • 4 Transmit channels and 4 Receive channels Industry standard MPO/MTP ribbon fiber connector interface • Data rate up to 2.72 Gbps per channel • Pluggable MegArray® connector • 850 nm VCSEL array • Laser class 1 M IEC 60825-1:2001 compliant • Data I/O is CML compatible • Low power consumption, < 1 W • Power supply 3.3 V Rx_EN Rx_SD SQ_EN VCCA Rx 0RX0 TransImpedance and Limiting Amplifier DOUT0+ DOUT0DOUT3+ DOUT3DIN3+ DIN3- VCCB Rx VEE Rx PIN Array 1RX1 2RX2 3RX3 VCSEL Driver VCSEL Array DIN0+ DIN0- 3TX3 2TX2 1TX1 0TX0 VCSEL Driver Controller Tx_EN Tx_DIS RESET FAULT VCC Tx VEE TX Figure 1 - Transceiver Block Diagram 1 Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2007, Zarlink Semiconductor Inc. All Rights Reserved. ZL60301 Shortform Data Sheet Applications • High-speed interconnects within and between switches, routers and transport equipment • Server-Server Clusters, Super-computing interconnections • InfiniBand 4x-SX compliant • Fibre Channel connections • Proprietary backplanes • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane Description The ZL60301 is high-speed transceiver for parallel fiber applications. This transceiver performs E/O and O/E conversions for data transmission over multimode fiber ribbon. The ZL60301 provides advantages in terms of power consumption, edge and board density over competing solutions. The transmit section converts parallel electrical input signals via a laser driver and a VCSEL array into parallel optical output signals at a wavelength of 850 nm. The receive section converts parallel optical input signals via a PIN photodiode array and a transimpedance and limiting amplifier, into electrical output signals. The module is fitted with two pluggable industry-standard connectors. For the electrical interface, a 100 position FCI MegArray® receptacle is used. For the optical interface, an industry-standard MTPTM(MPO) connector is used, which is compliant with IEC 61754-7. This provides ease of assembly on the host board and enables provisioning of bandwidth on demand. Reliability assurance is based on Telcordia GR-468-CORE and the parts are compliant to the EU directive 2002/95/EC issued 27 January 2003 [RoHS]. Exemption 6 & 7 2 Zarlink Semiconductor Inc. ZL60301 Shortform Data Sheet Classified in accordance with IEC 60825-1/A2:2001, IEC 60825-2: 2000 Class 1 M Laser Product Emitted wavelength: 840 nm Module front view - MTP key up Tx0 Tx1 Tx2 Tx3 − − − − Rx3 Host printed circuit board Table 1 - Transceiver Optical Channel Assignment 3 Zarlink Semiconductor Inc. Rx2 Rx1 Rx0 NOTES:- A1 A10 1. All dimensions in mm. 2. Tolerancing per ASME Y14.5M-1994. A C n0,58 `0,05 7,48 18,16 j n0,05 A B-C 1,145 13,72 17,5 2-56 UNC-2B n2,5 n3,63 B 2-56 UNC-2B 3,50 Deep MIN n1,3 j n0,15m A j n0,15m A B-C j n0,15m A B-C j n0,15m A B-C 36,87 FRONT VIEW ( 2 : 1 ) 30,23 12,5 4,3 0,98 14,4 0,76 3,26 7,55 12,23 27,64 31,75 Projection Method Package code © Zarlink Semiconductor 2002. All rights reserved. ISSUE 1 2 3 ACN JS004296R1A JS004296 rev.2 JS004296 rev.3 DATE 12-JUN-03 24-JAN-04 24-JAN-05 APPRD. TD/BE MD/MA MD/MA Previous package codes MJ Drawing type Package Drawing - Module Layout Title JS004296 17,5 (n2,69 `0,12 Hole) j n0,1 A B-C 14,4 Max product outline Component keep-out area. n1,70 `0,12 Holes j n0,1 A B-C K1 A1 K10 A10 n2,69 `0,12 Hole 30,23 j n0,05 A B-C 18,16 n0,58 `0,05 Pads 35,31 `0,75 j n0,1 A B-C 31,75 n3,00 MIN pads, Keep Out j n0,1 A j n0,1 A B-C C B 5,15 `0,25 n4,30 MIN pads (3x), Keep Out 1,145 NOTES:1. All dimensions in mm. 2. Tolerancing per ASME Y14.5M-1994. A 13,72 Projection Method Package code © Zarlink Semiconductor 2002. All rights reserved. ISSUE 1 2 3 ACN JS004296R1A JS004296 rev.2 JS004296 rev.3 DATE 12-JUN-03 24-JAN-05 14-FEB-05 APPRD. TD/BE MD/MA MD/MA Previous package codes MJ Drawing type Package Drawing, Host Circuit Board Footprint Layout Title JS004296 For more information about all Zarlink products visit our Web Site at www.zarlink.com Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request. Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright Zarlink Semiconductor Inc. All Rights Reserved. TECHNICAL DOCUMENTATION - NOT FOR RESALE