MICROCIRCUIT DATA SHEET Original Creation Date: 08/02/95 Last Update Date: 11/12/98 Last Major Revision Date: 08/02/95 MNLM556-X REV 0BL DUAL TIMER Industry Part Number NS Part Numbers LM556 LM556J-MIL Prime Die LMJ556 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNLM556-X REV 0BL Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = 15V SYMBOL Icc PARAMETER Supply Current CONDITIONS NOTES PINNAME MIN Vcc = 5V, Rl = Infinity Rl = Infinity Vcc = 18V, Rl = Infinity MAX UNIT SUBGROUPS 10 mA 1 15 mA 2, 3 22 mA 1 30 mA 2, 3 26 mA 1 35 mA 2, 3 Il Leakage Output High Pin 1, 13 Vcc = 18V 100 nA 1 Vsat Pin 1, 13 Sat Il = 15mA 240 mV 1 500 mV 2, 3 80 mV 1 200 mV 2, 3 2.9 3.8 V 1, 2, 3 9.6 10.4 V 1, 2, 3 Vcc = 4.5V, Il = 4.5mA Vcont1 Control Voltage Level Vcont2 Control Voltage Level Vol1 Output Voltage Drop (Low) Isink = 10mA 150 mV 1, 2, 3 Vol2 Output Voltage Drop (Low) Isink = 50mA 500 mV 1, 2, 3 Vol3 Output Voltage Drop (Low) Isink = 100mA 2.25 V 1, 2, 3 Vol4 Output Voltage Drop (Low) Vcc = 5V, Isink = 8mA 250 mV 1, 2, 3 Voh1 Output Voltage Drop (High) Vcc = 5V, Isource = 100mA 3 V 1 2.75 V 2, 3 13 V 1 12.75 V 2, 3 100 nA 1 300 nA 2, 3 4.8 5.2 V 1, 2, 3 1.45 1.9 V 1 500 nA 1, 2, 3 Voh2 Ith Vtrig Output Voltage Drop (High) Vcc = 5V Isource = 100mA Threshold Current Trigger Voltage Vcc = 5V 1 Trigger Current 2 MICROCIRCUIT DATA SHEET MNLM556-X REV 0BL Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = 15V SYMBOL PARAMETER Vreset Reset Voltage High Vreset Reset Voltage Low Reset Vth CONDITIONS NOTES Vreset = 1V 2 PINNAME MIN 10 Note 1: Note 2: Vcc = 15V Guaranteed parameter not tested. Limit tested go-no-go, datalog reading is device output. 3 UNIT SUBGROUPS V 1, 2, 3 0.4 1 V 1 0.18 1 V 2, 3 0.4 mA 1 0.15 mA 2, 3 9.5 10.5 V 1 9 11 V 2, 3 Reset Current Threshold Voltage MAX MICROCIRCUIT DATA SHEET MNLM556-X REV 0BL Revision History Rev ECN # 0BL M0001696 11/12/98 Rel Date Originator Changes Barbara Lopez Changed: MNLM556-X Rev. 0AL to MNLM556-X Rev. 0BL. 4