ETC DDU66C

DDU66C
data 3 
delay
devices, inc.
5-TAP, HCMOS-INTERFACED
FIXED DELAY LINE
(SERIES DDU66C)
FEATURES
•
•
•
•
•
•
PACKAGES
Five equally spaced outputs
Fits standard 14-pin DIP socket
Low profile
Auto-insertable
Input & outputs fully CMOS interfaced & buffered
IN
1
T2
4
T4
6
GND
7
14
VDD
12
T1
10
T3
8
T5
IN
N/C
N/C
T2
N/C
T4
GND
1
2
3
4
5
6
7
14
13
12
11
10
9
8
VDD
N/C
T1
N/C
T3
N/C
T5
2
10 T L fan-out capability
DDU66C-xx
DIP
DDU66C-xxA2 Gull-Wing
DDU66C-xxB2 J-Lead
DDU66C-xxME7 Military DIP
FUNCTIONAL DESCRIPTION
DDU66C-xxD1
DDU66C-xxD4
DDU66C-xxMD1
DDU66C-xxMD4
Com. SMD
Com. SMD
Mil. SMD
Mil. SMD
PIN DESCRIPTIONS
The DDU66C-series device is a 5-tap digitally buffered delay line. The
IN
Signal Input
signal input (IN) is reproduced at the outputs (T1-T5), shifted in time by an
T1-T5 Tap Outputs
amount given by the device dash number. For dash numbers less than 40,
VDD
+5 Volts
the total delay of the line is measured from T1 to T5, with the nominal value
GND Ground
given by the dash number. The nominal tap-to-tap delay increment is
given by 1/4 of this number. The inherent delay from IN to T1 is nominally 8.0ns. For dash numbers
greater than or equal to 40, the total delay of the line is measured from IN to T5, with the nominal value
given by the dash number. The nominal tap-to-tap delay increment is given by 1/5 of this number.
SERIES SPECIFICATIONS
•
•
•
•
•
•
DASH NUMBER SPECIFICATIONS
Minimum input pulse width: 40% of total delay
Output rise time: 8ns typical
Supply voltage: 5VDC ± 5%
Supply current: ICCL = 40µa typical
ICCH = 10ma typical
Operating temperature: 0° to 70° C
Temp. coefficient of total delay: 300 PPM/°C
8.0ns
VCC IN
25%
T1
25%
T2
25%
T3
25%
T4
T5 GND
Functional diagram for dash numbers < 40
20%
VCC IN
20%
T1
20%
T2
20%
T3
Part
Number
DDU222C-10
DDU222C-20
DDU222C-50
DDU222C-60
DDU222C-75
DDU222C-100
DDU222C-125
DDU222C-150
DDU222C-175
DDU222C-200
DDU222C-250
2/5/97
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Delay Per
Tap (ns)
2.5 ± 1.0
5.0 ± 2.0
10.0 ± 3.0
12.0 ± 3.0
15.0 ± 3.0
20.0 ± 3.0
25.0 ± 3.0
30.0 ± 3.0
35.0 ± 4.0
40.0 ± 4.0
50.0 ± 5.0
* Total delay is referenced to first tap output
Input to first tap = 8.0ns ± 2ns
NOTE: Any dash number between 10 and 250 not
shown is also available.
20%
T4
T5 GND
Functional diagram for dash numbers >= 40
Doc #97021
Total
Delay (ns)
10 ± 2.0 *
20 ± 2.0 *
50 ± 3.0
60 ± 3.0
75 ± 4.0
100 ± 5.0
125 ± 6.5
150 ± 7.5
175 ± 8.0
200 ± 10.0
250 ± 12.5
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
 1997 Data Delay Devices
1
DDU66C
APPLICATION NOTES
Delay Devices if your application requires device
testing at a specific input condition.
HIGH FREQUENCY RESPONSE
The DDU66C tolerances are guaranteed for input
pulse widths and periods greater than those
specified in the test conditions. Although the
device will function properly for pulse widths as
small as 40% of the total delay and periods as
small as 80% of the total delay (for a symmetric
input), the delays may deviate from their values at
low frequency. However, for a given input
condition, the deviation will be repeatable from
pulse to pulse. Contact technical support at Data
POWER SUPPLY BYPASSING
The DDU66C relies on a stable power supply to
produce repeatable delays within the stated
tolerances. A 0.1uf capacitor from VDD to GND,
located as close as possible to the VDD pin, is
recommended. A wide VDD trace and a clean
ground plane should be used.
DEVICE SPECIFICATIONS
TABLE 1: ABSOLUTE MAXIMUM RATINGS
PARAMETER
DC Supply Voltage
Input Pin Voltage
Storage Temperature
Lead Temperature
SYMBOL
VDD
VIN
TSTRG
TLEAD
MIN
-0.3
-0.3
-55
MAX
7.0
VDD+0.3
150
300
UNITS
V
V
C
C
NOTES
10 sec
TABLE 2: DC ELECTRICAL CHARACTERISTICS
(0C to 70C, 4.75V to 5.25V)
PARAMETER
High Level Output Voltage
SYMBOL
VOH
Low Level Output Voltage
VOL
High Level Output Current
Low Level Output Current
High Level Input Voltage
Low Level Input Voltage
Input Current
IOH
IOL
VIH
VIL
IIH
Doc #97021
Powered
2/5/97
by ICminer.com
MIN
3.98
TYP
4.4
MAX
UNITS
V
0.15
0.26
V
-4.0
4.0
mA
mA
V
V
µA
3.15
1.35
0.10
NOTES
VDD = 5.0, IOH = MAX
VIH = MIN, VIL = MAX
VDD = 5.0, IOL = MAX
VIH = MIN, VIL = MAX
VDD = 5.0
DATA DELAY DEVICES, INC.
Tel: 973-773-2299 Fax: 973-773-9672
Electronic-Library Service CopyRight 2003
http://www.datadelay.com
2
DDU66C
PACKAGE DIMENSIONS
14
12
10
8
Lead Material:
Nickel-Iron alloy 42
TIN PLATE
14
12
10
.410
TYP.
1
1
4
6
8
4
6
7
7
.280
MAX.
.780 MAX.
.820 MAX.
.290
MAX.
.020 .320
TYP. MAX.
.130
±.030
.015 TYP.
.010±.002
.018
TYP.
.070 MAX.
.350
MAX.
.600±.010
.018 TYP.
.600 TYP.
14
.040
TYP.
12
10
.010 TYP.
4
8
.090
6
.040
TYP.
.020 TYP.
14
.270
TYP.
1
12
7
.050
TYP.
DDU66C-xxA2 (Commercial Gull-Wing)
.320
TYP.
.270
TYP.
1
.300
MAX.
.050 TYP.
8
10
.430
TYP.
.100
.600
.790 MAX.
.300
TYP.
DDU66C-xxME7 (Military)
DDU66C-xx (Commercial)
.020 TYP.
.020 TYP.
.100
TYP.
4
.110
6
7
.100
.600
.790 MAX.
.350
MAX.
.110
TYP.
DDU66C-xxB2 (Commercial J-Lead)
.650
.100
.100
1
.017
14
1
.510
MAX.
.300
TYP.
14
.510
MAX.
.300
TYP.
7
7
8
.100
.300
.510 MAX.
.050
.510 MAX.
.080
.300
.200 MAX. (Com)
.025
8
.100
.050
.008
.017
.200 MAX. (Com)
.225 MAX. (Mil)
.080
.008
.225 MAX. (Mil)
.065
TYP.
.360
TYP.
.065
TYP.
.045
DDU66C-xxD1 (Commercial SMD)
DDU66C-xxMD1 (Military SMD)
Doc #97021
2/5/97
Powered by ICminer.com Electronic-Library Service CopyRight 2003
.005
.360 TYP.
.065 TYP.
.065 TYP.
DDU66C-xxD4 (Commercial SMD)
DDU66C-xxMD4 (Military SMD)
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
3
DDU66C
DELAY LINE AUTOMATED TESTING
TEST CONDITIONS
INPUT:
o
o
Ambient Temperature: 25 C ± 3 C
Supply Voltage (VDD): 5.0V ± 0.1V
Input Pulse:
High = 5.0V ± 0.1V
Low = 0.0V ± 0.1V
Source Impedance:
50Ω Max.
Rise/Fall Time:
5.0 ns Max. (measured
between 0.5V and 4.5V )
Pulse Width:
PWIN = 1.5 x Total Delay
Period:
PERIN = 10 x Total Delay
OUTPUT:
Load:
Cload:
Threshold:
1 FAST-TTL Gate
5pf ± 10%
2.5V (Rising & Falling)
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
PRINTER
COMPUTER
SYSTEM
REF
PULSE
GENERATOR
OUT
IN
TRIG
DEVICE UNDER
TEST (DUT)
T1
IN
T2
TRIG
TIME INTERVAL
COUNTER
T3
T4
T5
Test Setup
PERIN
PWIN
TRISE
INPUT
SIGNAL
TFALL
VIH
4.5V
2.5V
0.5V
4.5V
2.5V
0.5V
TRISE
OUTPUT
SIGNAL
VIL
TFALL
VOH
2.5V
2.5V
VOL
Timing Diagram For Testing
Doc #97021
Powered
2/5/97
by ICminer.com
DATA DELAY DEVICES, INC.
Tel: 973-773-2299 Fax: 973-773-9672
Electronic-Library Service CopyRight 2003
http://www.datadelay.com
4